Posts by abu baniaz

ZoomZoomLukes xml file is also part of image now. If you select uk zzl as your provider, the unavailable channels will be skipped by ABM

Found this if someone can resize it for you.

http://www.lyngsat-logo.com/tvchannel/fi/MTV-3-Sport-1-HD.html

Cam scripts are not required on openvix.

You have to use 06 in mg_cfg. Its a MIPS processor.

Which image are you using?

Perhaps the images on their site are good to you

http://www.katsomo.fi/

Try replacing your satellites.xml

No need to download EPG again. It should download automatically now.

Sorry for repeating this again, you must put enigma2 to sleep first with telnet command

init 4

then delete the following lines

config.Nims.0.diseqcB=3601
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=3601

Save and let transfer complete then restart with telnet command

init 3

Can you paste that whole section of your settings file/upload it if there are no personal detail in it.

/etc/enigma2/

Dont forget that enigma must be stopped if you are editing. Otherwise file will be re-written on restart

I'd still check what your settings file says.

Quote from mkohman

ok thanks. so I connect the lnb cable to tuner b. but is there a setting which I must enable within the menu? thanks

Golden rule is that your tuner configurations (plural) must match what is connected to the tuners.

If you don't want the benefit of using internal loop through, the tuner with nothing connected to it must be set as "not configured".

Automatic is auto diseqc. Doesn't work very well in my experience. If you look at your settings file, there will be something like 3601 next to the NIM(tuner) entry. If you want to delete those bits, you'll have to put enigma2 to sleep with an init 4 command.

It is done internally by software

Yes, allows you to watch one channel and record another. Limitations apply.

What is your tuner config?
Did you use "automatic" by any chance?

You should connect cable to tuner B. There is an issue with looping from A to B. B to A is fine.

It is possible that one of tha components on the motherboard is faulty. If you search the net, there is a guide by Johnny B to check voltages on the test pins.

Autobouquets does not do terrestrial, so you won't have both channels in same bouquet just by using AB 28.2.

If you want to schedule a recording on a DTT channel from EPG, you will have to navigate to it.

Treat DTT as if it was another satellite.

When you set your timer, just set in on the DTT channel.

You can edit your chanel list and place chanenls in order/bouquet you like.