If dvbsnoop is not there, it won't work. Install it will telnet command
opkg install dvbsnoop
Check that dvbsnoop is present and do a dummy dvbsnoop command
dvbsnoop -n 500 0x10 >/tmp/10.txtStart afresh, remove then re-install the plugin. Do not make any edits to script, you don't have to. Just select 40985 from the GUI. You can edit Net ID later to save you from having to select it.
Should not really be posting in a download thread.....
Save your existing chanenls using Dreamboxedit just in case.
Anyway, seems as if it is not running. Have you got dvbsnoop installed? Which version of the plugin areyou using? What exact steps have you taken? What errors/results if any? Are ypou sure you have the correct net ID? If you are using teh script version of plugin, post the line with your NerID so others can double check.
The renames have been done by the supplement file.
FIlm4 hd is channel 315 and the EPG ID is 4044. Delete this entry from the supplement file.
315:4044:::::::Channel unavailable on unofficial receiversThis is an ipk with some unofficial modifications.
QuoteDisplay More
05-07-2014 Not by Lraizer
Readme file edited to remove perform "scan first"
Added error checking in script. See following threadCodehttp://www.ukcvs.net/forum/showthread.php?29323-AutoBouquet-E2-28-2E&p=52706&viewfull=1#post52706
Re-ordered the regions
Owing to HD channel changes, supplement file now renames them
custom_sort_3.txt has had the affected channels commented out
ITV regions also named via supplement file
"Custom" relabelled to "custom swap"
Hide PLI place holders defaulted to true
Other/extra defaulted to true
You can use this calculator
http://www.satlex.de/en/elobst_calc.htmlYou know the angle 29.7, you can measure how far the wall is from the dish. It will give you the maximum height that the wall can be above the dish.
At 3m distance, the dish can be up to 1.71m lower than the top of the wall.
At 5m distance, the dish can be up to 2.85m lower than the top of the wall.
29.7 meters seems a lot???
Degrees not meters.
The elevation angle for 13.0 is 29.7. Using trigonometry, Tan 29.7= Distance to object/Height, 0.57xHeight = Distance to object
I think you are too close.
Yes but there are settings that need to be in place and that is the bit I am yet to understand. Also the VU+Duo should have DVB-C tuner, some have double tuner DVB -S and DVB-C which makes them able to work both on Sly and Vir**in media.
The Duo has tuners soldered on motherboard, you must use a USB tuner.
The Duo 2 has plug and play tuners.
Lraizer has made the plugin for teh SH$ as well as Mipsel/32. If you are having to manually scan and then use the plugin, then there is something grosly wrong.
Firstrun is about a min and a half. All other runs are less than 1 minute.
Is it possible you are using the wrong installers on your receivers? Enigma2 will always use a free tuner if avialbale, this is whey those questions above are structured the way they are.
Lets take one and troubleshoot.
This is not how the plugin is meant to work, you are sidestepping the issue instead of identifying and resolving it.
1. What receiver?
2. Which image and build?
3. What is the physical tuner setup for each tuner?
4. What is the software setup for each tuner?
5. What version of the plugin are you using?
6. There is a script with error checking that stops it from deleting bouquets in case of error. It is in the main thread. Are you using this?
7. What settings are you uisng. Post a screenshot please. Not the one with the ticks, but the second page where you make the settings.
8. Have you modified any of the files?
The solution could simply be disabling script check.
If it works for you then I'm happy for you.
However, for the benefit of others who may read this thread...
Why setup a diseqc switch when there isn't one involved?
Loop through has limitations.
Granted that there are the odd receivers with drivers that require send diseqc to be set to "yes", the rest can leave it at the deafult value of "no"
I attach a graphical representation of each tuner having a cable from the satellite dish and what each tuner tuner should be set to. Slight differences in images but principle is same (latest OE images have revamped the GUI).
Thanks for the replies, does this still have s*y numbering though?
yes it does.
By using custom sort, you can add/remove/reorder contents of bouquets.
one liner telnet command
Please copy the whole command and then PASTE it to avoid typos. Somebody made a mistake and his receiver did not boot because he accidentally deleted the enigma2 folder.
init 4 && rm -rf /etc/enigma2/lamedb && rm -rf /etc/enigma2/*.tv && rm -rf /etc/enigma2/*.radio && init 3These are latest unofficial adaptations. The attached files to replace existing ones in
/usr/lib/enigma2/python/Plugins/Extensions/AutoBouquets/
Swap.txt to swap available HD channels. (Swap does not seem to work when sort = default.)
Supplement file to add names to ITV regions as well as correct FTA encryptions. Also renames all unavailable channels.
Script which has the failsafe adaptation by Lraizer.
I always enable other/extra
Using sort = HD first.
First bouquet contains HD channels including unavailable ones. Numbering still works but unavailable channels remain in main bouquets.
Using Sort = Sort 3
First bouquet contains all channels including renamed ones. Unavailable HD channels will not appear in other bouquets.
Can you confirm that you have two cables connected to tuners?
If you do, can you try disabling one tuner at a time and check that the other cable/tuner/lnb port is fine.
You would be better off adding a diseqc switch to your setup, two if you hop between the two sats.
What have you configured each tuner as?
This is Lraizer's 2014_06_01_1500 version. Classified as experimental, so backup your lists first.
Pure regions not listed, so use the "first available" option if you are in a pure area.
DVBsnoop required. Scan whilst on an active channel. Readme file contained.
----------------------------------
AutoBouquets C2 for Cable UK
Version date - 1st June 2014
Created by LraiZer - www.ukcvs.net
----------------------------------
Plugin Usage
----------------
first make sure you have dvbsnoop installed on box.
next, perform a service scan so that you have latest lamedb loaded.
next zap to an active channel on cable so that the reader can read the bouquet data from the stream.
now its time to select AutoBouquets C2 Plugin from plugins menu and choose your local region or First available.
defaults to first available netid, if selected area not found. this area should be correct for single netid transmission areas!
have fun
