Posts by abu baniaz

  • DCC

    Maybe your firewall is not allowing DCC through.


    You have been at this for a few days. You can continue trying to resolve the issue. However, alternatives for you to consider

    For FTP ( transferring files), use Filezilla.

    For issuing commands (what people refer to as "telnet"), use Putty

    For editing files, use a linux compatible editor like notepad++ (different to windows notepad)

  • DCC

    The router address is wrong. Easiest way is to close the application and edit the ini file.


    What do you want to do?

  • will I need a double tuner to watch and record at the same time

    Quote from car123

    I have a single cable tuner and a twin satellite tuner so if I connect the cable to the satellite tuner I will be able to record fta cable while watching a difrent chanel

    No, you cannot do that. A satellite tuner cannot receive cable signal. It was already mentioned that you cannot loop cable/satellite tuners together.


    You are better off selling your single hybrid card and installing a twin hybrid card. Swap, not add.

    There are essentially only 5 FTA channels on cable, there are lots more on satellite. Watch/record the FTA channels on satellite.

  • Lraizer Autobouquets E2 UK for Cable DVB C/T

    Updated instructions...


    19/09/2016 Added a valid cable service check. Will still fail if on out of region channel. Resized GUI size to match AB 28.2 Renamed plugin folder to AutoBouquets_Cable_E2 Thanks to Rossi Added hint text Added version date to title Changed log entries. No longer shows "MySHCom"



    Please do not confuse this plugin with
    AutoBouquetsMaker by the OE Alliance or
    AutoBouquets E2 28.2 also by LraiZer.


    To install:

    Transfer the ipk to the /tmp directory

    You can then install by remote.

    Blue button > Vix > install local extension

    or

    Menu > Plugins > Software management > install local extension


    The cable plugin requires DVBsnoop. This will be installed automatically if the image's plugin server "feeds" is available to you.

    If you cannot access the plugin server, you will have to manually source dvbsnoop.


    cables.xml:

    Some images do not have a cables.xml file. If this applies to you, download the attached cables.xml file. Unzip it then transfer it to /etc/enigma2/ and then restart teh reciver. If you are using an older type of image, transfer to /etc/tuxbox/


    Updated version is here

    Code
    https://github.com/oe-alliance/oe-alliance-tuxbox-common/tree/master/src



    Tuner configuration:

    Menu > Setup > Tuner config > Tuner setup

    or

    Menu > Setup > Service searching > Tuner configuration


    There are three types of Cable network in the UK. "Pure NTL", "ex-cable & wireless" and "Telewest". Select your one. If you do not know, select "all systems".

    dbdb21a7.jpg


    Initial non-Autobouquets Scan:

    AutoBouquets cable must be run while on a cable channel. So you must perform a scan first.


    Menu > Setup > Tuner config/Service searching > Manual scan > Select cable tuner >

    Type of scan = complete

    Green to scan


    (You can get away with just scanning a single frequency. If you do, ignore the BBC Two advice)


    3d9725a00199c8e4ba.jpg


    Autobouquets Scan:

    The plugin must be run while on an active cable channel.


    BBC Two is a good one to use as there are usually no duplicates. Any channel will do so long as you do not get a tuning error.

    Start AutoBouquetsCable. Select your Net ID from the drop down menu.

    f653b.png

    Bail out:

    If you do not satisfy the requirements, the plugin will stop. Please read the screen for what is wrong.

    7acde103e.png

    Completion:

    Once the plugin has finished, exit out of all menus. You will see the bouquets.

    There are only 5 free channels on UK cable. Just because it is free on satellite/terrestrial, it does not mean it is free on cable. There are no free HD channels. If the first five channels work, you have used the correct NetID and AutoBouquets Cable has done what it is meant to do. For other channels, please respect the forum rules.

    ff2c5c9.png

    321e4fd44e94b5c5.jpg

    You have just used Lraizer's Cable plugin. The numbers do match the official channel numbers. If you want to have the official numbering, consider using AutoBouquetsMaker.


    There are three different plugins. Please do not mix them up when asking for support.

    AutoBouquets C2 UK cable

    AutoBouquets E2 28.2

    AutoBouquetsMaker

  • will I need a double tuner to watch and record at the same time

    There are only 5 FTA channels on Cable. You would be better off connecting to an aerial and using Freeview.


    Please understand tuner and tuner module/card are two different things. If you do not understand this, re-read it and ask someone to re-explain.


    You will need two tuners. ( i did not say cards!)


    You can have one tuner card/module with two tuners (only has one connection, it has a built in splitter)

    You can use two tuner cards that have single tuners.


    The Duo2 only has space for two cards/modules. So a sat card and twin hybrid card would be best option for you.

    Hybrid means that it can be either Cable or Terrestrial.

  • Dreambox Virgin Media Cable Tuner Set Up

    LraiZer's cable plugin will only work if you are on an active cable channel (does not matter if you cannot decrypt it) . BBC2 is a good one to use as there are usually no duplicates


    Transfer cables.xml file to /etc/enigma2/ (You must unzip the zip file first)

    Restart the receiver

    In tuner configuration set Net ID (It does not really matter for UK, so you can leave at 00000)

    For provider select you version of cable network (if in UK: ex C&W, Pure, Telewest)

    Select manual scan, then select complete, perform scan.

  • Epg for USA on cband

    CrossEPG downloader obtains EPG by two methods:


    1.Signal stream for OpenTV EPG providers: Sky UK, Sky IT, Ausat 156E

    2. Rytec data over the internet.


    For internet methods, you are better off using EPG importer, don'tt use CrossEPG, the data is still the same.


    Rytec team will only do European providers and definitely not IPTV. Someone else asked on PLI forum where the Rytec data uploader posts. The advice was that he should use webgrab++ and maintain the data.