Looking around the forum, and seems nobody talk on this topic.
Question:
1) Can we implement CDN on OSCam / CCcam?
2) Will CDN increase the quality of streaming during card sharing between A provider with B provider ?
3) Will CDN help up on peer (STB) connecting to OScam or CCcam server?
Display Morebasically a hop is a "step" from one peer A to another B...
A=>B = 1 hop
A=>B=C = 2 hops
This is important in the moment you decide whether to give reshare to your peer B ( B =>C )
or NO RESHARE ( A=> B only )
it is common practice to give 1 reshare to your peer
I suggest take a read of these getting started
and FLINE and CLINE
Although they are basically for CCcam ,,they are of great help ...
Is that if hop=2 hops (A=>B=>C) means if I create a peer login to my brother example: C: abc.no-ip.com 12000 bro bro for his dreambox, with hop=2 he can login 2 boxes at one time using the same login I had created to him??
I had read alot of article in this forum regarding on hop setting and configuration, but cannot find any deep explanation on hop and what is so special or important of "hop"
Wiki did not mention in detail regarding on "hop" as well.
Googling as well cannot give a correct answer on "hop"
Can some expert enlighten me on this, thanks..
STB = Set top box, youll be ok to use it on a dreambox
Oh. But I wish to get a better picture on OScam + CCcam correct configuration method.
I'm following this method to get my OSCam/CCcam server up on my Ubuntu 14.04 LTS
http://linuxsat-support.com/showthread.php?t=16479
It has 2 Emulators automatically installed.
How to link them up correctly?
If you are using an STB the best thing you can do is install lss addons plugin there you will get cams and configs for all packages already setup for you and the card you wish to read in oscam this way the job is done for you
Thanks for the advice, I;m not using a STB.
Just a normal $kybox or Dreamb0x.
Follow this guide. It works as you'd like.
A setup but Oscam as reader and CCcam on the client is easy to set up and works perfectly stable
Upon reading on the link, it is basically a OSCam -> OScam (with CCcam protocol) which did not talk on the CCcam.cfg setting on the Remote Server (Oscam B).
What was set :-
At OScam.cfg
QuoteDisplay More
[newcamd]
port = 40000@0B00:000000
serverip = 200.*.*.*
allowed = 0.0.0.0-255.255.255.255
key = 0102030405060708091011121314
keepalive = 1
[cccam]
port = 12000
nodeid = D84B2FD610D0153C
version = 2.0.11
The CCcam protocol was activated in the OScam emulator. Whereby that is not what I mean up here.
Due to my OScam emulator installation is automatically installed the CCcam emulator, so I would like to know here, if it is OK to run 2 emulators whereby linking them together (they are in the same server)?
Not 2 same emulators with different protocol.
Going in to the OScam.user setting on the URL given
QuoteDisplay More
[account]
user = UserOscamB
pwd = PassOscamB
caid = 0B00
group = 1
ident = 0B00:000000
I think this user login and password is used as a C LINE and to be set in STB. Correct me if I'm wrong.
Can someone guide me on this please
What are you trying to do ?
I want to do something is correct to be done.
As far is I know there are many type of connecting 2 Emus. , but which one the best or correct way to be done.
My thinking is to use OSCam as a reader , CCcam as a peering work. Intermediately there should be a communication point btwn. these 2 emulators.
How it should be communicating?
How many method to connect OSCam with CCcam (Linking it up)
Is it OScam ----> CCcam OR CCcam -----> OSCam ? OR Either way?
Upon doing some reading here as well as other forum, I found up there 2 major way to connect OSCam with CCcam (vice-versa).
Technically and logically are they correct?
Expert kindly comment.
Method 1 (Using N-LINE)
####oscam.conf####
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[webif]
httpport = 8888
httpuser = XXXX
httppwd = YYYY
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255
[newcamd]
key = 0102030405060708091011121314
port = 34001@0500:024400
####oscam.server####
[reader]
label = mycardreader
protocol = internal
device = /dev/sci0
emmcache = 1,3,2
group = 1
caid = 0500
ident = 0500:024400
####oscam.user####
[account]
user = linuxsat
pwd = support
group = 1
au = mycardreader
caid = 0500
ident = 0500:024400
####cccam.cfg####
SERVER LISTEN PORT : 14000 #Port open at router (server side)
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :qqqq
WEBINFO PASSWORD :wwwww
TELNETINFO USERNAME :sssss
TELNETINFO PASSWORD :aaaa
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY:
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 34001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: user pass #to STB setup using CCCAM protocolMethod 2 (L-LINE)
####oscam.conf####
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[webif]
httpport = 8888
httpuser = XXXX
httppwd = YYYY
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255
[cs357x]
serverip=127.0.0.1 #local ip or your server ip
port=34001
suppresscmd08=0
keepalive=1
####oscam.server####
[reader]
label = mycardreader
protocol = internal
device = /dev/sci0
emmcache = 1,3,2
group = 1
caid = 0500
ident = 0500:024400
####oscam.user####
[account]
user = linuxsat
pwd = support
group = 1
au = mycardreader
caid = 0500
ident = 0500:024400
####cccam.cfg####
SERVER LISTEN PORT : 14000 #Port open at router (server side)
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :qqqq
WEBINFO PASSWORD :wwwww
TELNETINFO USERNAME :sssss
TELNETINFO PASSWORD :aaaa
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY:
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
L: 127.0.0.1 34001 linuxsat support 0500 024400 256
F: user pass #to STB setup using CCCAM protocol:06:
Better version for my diagram.
https://dl.dropboxusercontent.…nd%20CCcam%20Diagram.html
Please comment on the setting and working logic.
N-Line and C-Line feed reader not yet update, cos not sure of the logic working yet.
Unfortunately, the solution is small we really see anything: (
But now I know how it works, but it's bad for your work not be seen properly.
Sorry I did not notice it is so small due, with that I will attach a PDF file here.
OSCcam and CCcam.pdf
I had done a diagram with description.
Kindly help me to check if the logic is correct or not.
Hope this diagram would be able to help others to get better idea on how OSCam/CCcam aka "Batman and Robin" works.
PDF Version (Big and Clear) : OSCcam and CCcam.pdf
Display MoreSome people use CCCam for its simplicity. OSCam is a good emu when used on its own but if its not setup correctly it can cause ecm flooding when it connects to a CCCam server. A lot of people use CCCam for these reasons.
Here are a few threads that will explain this better;
Oscam using CCcam or oscam alone? What's best?
Upon reading on the link Oscam using CCcam or oscam alone? What's best? would like to summarize it here:-
OSCan+CCcam
a) Possible of crashes when it comes to we start one side of the emulator (OScam) only, and not both. This will cause CCcam to run in and read the card (/dev/sci0 card reader) where by it is not suppose be.
b) When OScam + CCcam restart at one time, but CCcam fully loaded first before OScam. Causing same problem as above.
Nothing much after that because the content twisted to OSCam+CCcam explanation.. (Running out of topic)
My thinking on this: I think the way of that 2 above main problem happen when the STP is set to run 2 lines from both OSCam + CCcam. (Correct me if I'm wrong).
Let say if I split out the emu work into 2 section, whereby OSCam will purely work as a card reader job, not others.
CCcam job will be fully on peering job, whereby providing access to STB.
With this separation of job, would it be able to solve the crash problem?
------------
On Reference Link Why not use Oscam as a server with CCcam protocol?[/QUOTE] summarize :-
Purely on OSCam
a) Issue of faker when it happen to be a barter trade of N Lines. However someone pointed out it can be solve by grouping it correctly, but to conclusion or solid prove on it.
b) Hopping issue, where by I still do not understand
c) Pure response on bug reporting for OSCam, and they simply mark "solved" to ""unsolved"" issue.
OScam+CCcam
a) Problem of CCcam ver 2.1.3 or below with the "256" tricks
Summary
As I had mentioned above, what if OSCam work purely as "Card Reading Job" only and "CCcam" works as "Peering Job to STB", will it be a perfect solution??
Does the log file shows something like
... oscam.7045 is frozen, Restarting...
... AutoStopping: oscam.7045
... AutoStopping: CCcam.2.1.3
... AutoStarting: oscam.7045
I remember I came across this topic at some forum, and if it does, I think if I'm not wrong, you got to upgrade your oscam to the latest version / patches.
Hope it help...
Sorry can someone assist me to upgrade Ubuntu 14.04 LTS's OScam/CCcam's , CCcam PHP's panel? :23_002:
Sorry, I would like to re-point back my question at #8 on
If OScam can work as a reader + peer (for boxes to connect to server) by itself, why there is a need to have OSCam+CCcam ? I do not really understand why there is a redundancy on this, if OScam can work perfectly fine on itself.
Why there is a need for OScam to embed with CCcam? Is there anything special to do so? Or there is a weak point at OScam itself that required CCcam to bind with?
I'm trying on 2 method CCcam.cfg setting, I'm OK and roughly understand the logic.
For OSCam to create a peer for my boxes, my OScam webif shows initial "ONLINE" with green bar and after 10 seconds later +/- , it changed to "Connected" with light brown bar.
Checking on my box CCcam status, shows it is at "Login" status and not "Online".
May I know what is the problem?
Appreciated.
Experts in OSCam/CCcam kindly point me to a correct path. :83:
I think I found up the reason why when I update my CCcam.cfg it cannot be instantly refresh on my new Listening Port number.
After I did my port updating (as well as updating my router inbound port) + RESTARTING my Ubuntu Server, it will refresh OSCam/CCcam will reflect to my new port update.
If you are running windows o/s try the attached file..
Thanks Master G, however is that possible for me to upgrade my PHP version in my Ubuntu 14.04 LTS server?
This is because it is more portable and I can use my IPad to browse through rather then I gotta use my Windows laptop all the time.
Appreciated.
My OScam/CCcam (CCcam Webmin PHP is currently running the "black and white version" as below :-
Welcome to CCcam 2.1.3 server
Connected clients: 1
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
|user |xxx.xxx.xxx.242 |00d 00:12:09|00d 00:12:09|0 (0)|0 (0)| 2.1.4 | | |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| user| |
+---------+---------------------------------------+
Is that possible for me to upgrade it to this URL: CCcam Webmin Panel
The colourful version of PHP CCcam Webmin Panel?
Can someone guide me to this and appreciated.
No worries, no payserver is allowed here. I'm aware of the rules. :32_002:
Infact the main reason I for me to do here is to get more idea on 2 key points, which are Proxy, Load Balancing + CDN.
Proxy, Load Balancing I can see I can get some posting here. I will go through all the posting first.
However for CDN stuff on OSCam, it seems like no where I can see it here..
Infact there info are for my OpenERP project which I'm doing it now; whereby getting the logic and applying in my project.
Thanks again for the clarification. Appreciated.
