Posts by njunwa1

  • How to Install Latest Oscam on DM800se v2 clone with OpenPLI Image

    Hi


    I have dm800se v2 clone with Openpli 4 image installed


    The image comes with Softcam panel but Only CCcam exists and no option to install other softcam


    I decided to install TSpanel to be free to install Oscam but suprsingly the tspanel 7.5 has no any Latest Oscam and the Oscam I see in the panel is new to me cant understand it(see image) yet after installation I dont see where the config files are located usually /var/tuxbox/config


    Who can help me install Latest Oscam in my box


  • CCcam entitlements show no CA


    I was able to get it read with Oscam atleast Am now confident that the DM ca slot is fulll functional ever since Oscam say card is detected


    2014/11/28 19:54:12 5F6A30 r *SAT [internal] ATR: 3B 34 94 00 30 42 30 30
    2014/11/28 19:54:12 5F6A30 r *SAT [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
    2014/11/28 19:54:12 5F6A30 r *SAT [internal] Calculated work ETU is 12.80 us reader mhz = 500
    2014/11/28 19:54:12 5F6A30 r *SAT [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2014/11/28 19:54:15 5F6A30 r *SAT [internal] found card system emu
    2014/11/28 19:54:15 5F6A30 r *SAT [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2014/11/28 19:54:16 0 s init for all local cards done


    This Card may not need RSA and BK just looking at the Configuration files of other conax providers like TNT,Wilhelm.Tel and Imagin all these are CAID 0B00
    I was able to contact the guy who has same card posted in the above link but he is not ready to help neither does he respond


    But one think shocks me why Card system detected is emu


    Code
    *SAT [internal] found card system emu

  • CCcam entitlements show no CA

    Quote from nano

    What card is it ?????


    How can you expect to get help if you cannot state what provider it is. Certain Conax cards don't work with CCCam. Certain Conax cards are paired meaning you need the RSAKey and Boxkey to get the card to clear.


    If you cant provide the information how are we supposed to help you???? I might aswell just close the thread as without that info its pointless continuing it.


    Its "StarSat" provider and the card(CAID 0B00) is paired to receiver, probably may need RSA and BK
    But I thought on the entitlements page I could get some helpful info to get me started


    - - - Updated - - -


    Quote from alimac

    does no ca found on screen


    relate to cam reader


    thought it was flash


    Problem of no ca found is arleady solved sir
    But was thinking its can be the cause thats why I asked

  • CCcam entitlements show no CA

    Quote from nano

    It depends on what card it is. Generally you can run a Conax card at a faster speed than what you have set.


    Even after changing card slot DM cannot detect my card


  • CCcam entitlements show no CA

    Quote from master G

    You have CCcam configured for the lower card reader, change to this (0 is upper slot, 1 is lower slot):

    Code
    SMARTCARD CLOCK FREQUENCY: /dev/sci[COLOR='#FF0000']0[/COLOR] 3400000


    Dreambox NO CA FOUND Repair Tool


    Thanks m8 on the issue of upper slot and lower slot


    Further clarification are needed here
    I have DM800se v2 sim2.2 ssl88a so the tool above may not help
    I read in other forum the latest release is v3 with DM800SE SSL#84d repair support and not sim2.2


    Note: The error is no more there after I flashed a new image, could the effect still be there? making a box not to detect ca


    How about the smart card frequency for Conax cards is 3.4Mhz ok?

  • CCcam entitlements show no CA

    Am using CCcam 2.3.0 on DM800se v2 clone with a Conax card but when I visit webif on entitlements page am told No ca or ca is unknown
    CCcam.cfg

    Code
    SMARTCARD CLOCK FREQUENCY: /dev/sci1 3400000


    am using upper Ca slot


    Could it be that CA slot for my DM not working?


    The box has history of "No CA found" on LCD display but as I flashed of another image the error disappeared,Could it be that this error destroys my ca slot?


    Your help guys will be appreciated

  • Help sharing Nline using CCcam/Oscam

    Quote from master G

    There is a problem with the F line in CCcam.cfg. You have (F:client1 pswd1), but it should be (F: client1 pswd1). Notice the space after F:


    Client should then be connecting with C: hostname port client1 pswd1


    Is the server listen port open in the router ? Test it at canyouseeme.org.


    The port is Open sir I checked using "ufw"
    And thanks for pointing out the F line issue


    Can I use CCcam and Oscam for this setup or atleast Oscam alone?

  • Help sharing Nline using CCcam/Oscam


    Thanks sir but I want to learn using both emulators and its known that Oscam is the best emulator so best way is to stick to my setup or Oscam alone

  • Help sharing Nline using CCcam/Oscam

    Hellow house


    Am stuck please server is not connecting on remote client box
    Am using #thatfelow automated install


    My configurations are


    oscam.conf
    [global]
    logfile = /var/log/oscam.log
    nice = -1
    preferlocalcards = 1



    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1-255.255.254.254
    httprefresh = 15


    [newcamd]
    port = 15000@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1


    oscam.server
    [reader]
    label = ZAP
    protocol = newcamd
    device = xxxxxxxxxx.zapto.org,xxxxx #(#Make sure there is a comma between his server and port NOT a colon)
    key = 0102030405060708091011121314
    user = test1
    password = pswd1
    group = 1


    oscam.user


    [account]
    user = cccam
    pwd = cccam
    monlevel = 0
    uniq = 0
    group = 1,2
    au = 1


    cccam.cfg
    SERVER LISTEN PORT : xxxxx #server port
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :admin
    WEBINFO PASSWORD :admin
    TELNETINFO USERNAME :root
    TELNETINFO PASSWORD :dreambox
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY:
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 15000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
    F:client1 pswd1


    Any help please will be appreciated

  • sly box key generator

    Quote from master G

    Not all providers, some of them still require the boxkey..


    Ok in my reading on the streamboard documentation I encountered something named "CAM key for data for irrdetto SC"..
    Its explained under "rsa keys" Where they state for Nagr@ 3 you need RSA key but under irddeto you need "CAM key for data for irrdetto smart cards..


    Now what is this? because I have searched out in this forum and google but could not get appropriate answer


    REGARDS

  • CAM key data for Ir.deto SCs

    Any one help me please if its needed or not
    And if needed any tips/tools to Jtag the device I have tried in Mr Google and got some details in pakistan forum but they use their local language

  • CAM key data for Ir.deto SCs

    Am working on the i.***** card and was trying to read the streamboard documentation of configuring Oscam.server
    And came across some words which I do not get cleary any one to elaborate it for me on how to get it


    Quote

    rsakey and Boxkey
    parameter is optional


    CHANGE svn7046:06/12/12


    RSA key for Nagravision/Tiger SCs / CAM key data for I***** SCs, Conax SCs, default = none


    Please some one to explain what is that and where to get it from?


    Another line says


    Quote

    pincode
    parameter is optional


    pincode for Conax, Cryptoworks an Viaccess SCs


    pincode = pincode
    = # [blank] default


    Please someone to explain for me these terms and their necessity

  • How Set Up CCcam server in my Laptop(guide to newbie)

    Quote from mckee25

    Read & follow this tutorial from start to finish: Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install


    Thanks for the link but some few questions could no be naswered within the link
    Do I need the dish antenna for the setup to work


    And does the cardreader read a Card automatically or there is extra knowledge/tool required?


    I pointed out I want to card share nagra3 and ir*deto2


    Thanks

  • How Set Up CCcam server in my Laptop(guide to newbie)

    It has been long time I joined this forum and was very anxious to know how to setup my card share server
    As you can see for yourself at the bottom of this forum at the flag counter its very clear that this issue of card sharing is not practiced in African countries and am one of from those countries and would like to know this technology for I have knowledge on Using Linux server
    I have read plenty of tutorial and for a beginner they are few things am confused about please do not assume I know be ready to clarify more on my doubts


    Currently,A using receiver which I bought from China and they told me it was also a Linux receiver (its named QSAT Q23G) see details QSAT Q23G


    But having read many tutorials it seems Dreambox and others similar are the recommended ones but for me it will be difficult to get it in early days because I will have to import it from out the country and thus will have to Opt to setup CCcam in my Dell Inspiron with Intel Inside processor with 2 core processor each 1.7Mhz and with 2GB RAM and 500GB HDD


    As I have read and Understood It seems I need the following
    1.Laptop with any Linux distro server installed with Static IP address
    2.Card reader which I Google and see I can buy one from eBay Smargo smartreader+
    3.A smart card I want to share with loaded subscription
    4.Oscam and CCcam installed
    5.Router for my case I own a TP Link router



    Now my queries arise from those requirements
    1.Do I plug the smart card reader into the USB port of my computer or there is something I have skipped in my requirements?
    2.Whats a role of this Oscam now? for I have read only CCcam can setup a card to share
    3.And do I need a satellite dish at the site where my PC with Server runs? and if dish is needed where do I plug a wire coming from a satellite dish in accordance to my setup?(assuming testing a C line can be done to other part with satellite dish)
    4.Is the smart card reader I have chosen good for sharing MPEG-4 Nagravision3,I*****2 and MPEG-4 Conax


    Finally,Any one to provide me the links for me to get started I know they are plenty and some are pinned but you as geeks you know which way is easy for me to take to accomplish the work


    Thanks and will appreciate your help