I use Blackhole 3.0.1.F on my Vu Duo2. A few weeks ago I struggled to update Mediaportal 7.5.8 to 7.6.0. After a lot of messing about I managed to get it working. Now I`ve tried to update it to 7.6.1 and 7.6.3 but no matter what I do it will not update. I`ve loaded all the dependencies that`s ever been mentioned. I`ve tried updating and even complete installs of the versions available. I can only get 7.6.0 working. Any ideas to solve this problem would be much appreciated.
Thanx.
bo.
I get errors. I`m using Blackhole image on Vu Duo2.
Thanx anyway.
bo.
Thanx again esuo2.
That`s very helpful for me.
bo.
Thanx for the info esuo2. But because I had messed up my own files trying to configure them to work, I had to reinstall the emu ipk I have, I now have the tandberg channels working. At least I`m assuming they are working because I`m clearing the Arena Sport channels at 39*e.:cheers:
bo.
- - - Updated - - -
Is there a list of sats/channels that this setup opens with the emu? I`ve done a search but can`t find anything like a list.
Thanx.
bo.
Thanx for this, does this tutorial work on Blackhole image on a Vu Duo2? I get lost at various stages as there seems to be different paths and files. I`ve got a headache now:83: So I`m gonna have another go at the weekend when I will have plenty of time to ruin my setup. :06:
Thanx.
bo.
Forget my last post. The card reader is now working and I see it on my duo2 from the rasp. Now to monitor it and see how it performs.
Thanx to all who made this possible, especially Busman.
Thankyou all.
bo.
Thanx Busman. I will have another go sometime this week.
Thanx.
bo.
- - - Updated - - -
I have finally got oscam and my server working after following the guide pasted here by Busman. The only problem I have now is the pi doesnt seem to see my omnikey cardreader, there is no lights on on the reader. I have added these 2 lines to my server file:
protocol = pcsc
device = 0
but no sign of life.
bo.
Thanx for the info guys. But I`ve given up. I found a similar tutorial which I followed to the letter. I was able to change the password and access the setup using winscp or filezilla but I just cannot get the server going. I`ve been on it all day and I`ve packed in before I launch it out the window.
Thanx again.
bo.
Thanx Busman, I will give this ago as I`ve tried about 6 times the other method and I get failures at different stages everytime.
Thanx.
bo.
- - - Updated - - -
Only just noticed Busman you sent me to the same method I have been trying. I am now trying with the Jessie lite image. Now one of the failures I have everytime is this:
Once it reboots then log in as 'pi' and 'raspberry' again
Enable root password;
Code:
sudo passwd root
Then enter preferred password twice.
log out as current user.
Log in as 'root' using your chosen password.
I change the password to what I want but how do I login as "root" ? I have to use "pi" and "raspberry" to log back in. In the end I stopped trying to use my new password and carried on but maybe this is why I get failures further down the line.
bo.
I currently run a Vu Duo2 small (7 peers) oscam server. I would like to switch it to a Raspberry Pi, as I`m always messing around with my duo2 and annoying my peers. I have a Raspberry Pi 2 and Omnikey cardreader. I have tried the "from scratch"tutorial on here 3 times now, but have run in to issues. First issue was simply trying to change the login password. Ignoring this on another attempt, I had issues trying to compile oscam. This tutorial is from 2012 and says to use Raspbian “wheezy” I only found Jessie. Could this be the reason I`m hitting problems? I did notice I had to put "sudo" before every command line I typed, but even then some commands don`t work. Is there an more recent tutorial for a complete newbie like me when it comes raspberry pi and oscam?
Thanx for any help given.
bo.
My problem wasn`t opening the channel, it was scanning it in. I got it back using my old settings backup. But if I try to manually scan it in, it disappears.
bo.
Is anyone still receiving this channel 15.0west? I lost it about a month ago and put it down to me moving my dish higher up the pole it`s mounted on. But today I decided to go and reallign my dish properly again. I`d lost some satellites, but after sorting the dish again, I`ve got them back. However for the life of me I cannot get ESPN Carribean back. I`ve rescanned several times, I`ve updated the satellites xml. But nothing brings it back. The SNR on 15.0 west is coming in the high 70s so I don`t know what else I can do to get it back. Or has it gone altogether?
Thanx.
bo.
- - - Updated - - -
Well I don`t understand whats going on with my setup. As posted earlier, I had lost some satellites and a few channels from others. Today I realligned my dish and got back the missing satellites. However one channel is messing me about. ESPN Carribean at 15*west would not be scanned in. I tried everything to scan it in but it doesn`t appear. Now I always do a backup of my settings and I remembered I still had that channel in my old backup. So I put my old settings back in my duo2 and hey presto it`s back. What is baffling me though,is when I do a new scan of that satellite ESPN won`t appear even though I put in the correct frequency. I`ve updated my satellites xml and I`ve tried manually scanning the frequency along with a full scan but it never appears. Can anyone see what is going on.
bo.
I don`t think it helps, but I get discovery channels in HD on 0.8w. Different provider though,isn`t it?
bo.
Sorry Prophet m8. I went to test this channel only to find I have lost the digi channels and others. I had to move my dish last month for some building work at my house. I thought I had put it back correctly but I seem to have lost a couple of satellites and a few channels on a lot of the satellites I thought I had alligned properly. Looks like I`ll be sorting the dish at the weekend. So I am unable to test until then.
Sorry.
bo.
I get "Not selecting enigma2-plugin-Powervukeyupdater-0.3.ipk 0.3 due to incompatible architecture.Unknown package enigma2-plugin-powervukeyupdater-0.3.ipk.
bo.
- - - Updated - - -
My image is Blackhole 3.0.2F on vu duo2
master G, I`ve tried to install this using your link then through linuxsat panel, it won`t install from either.
bo.
Yesterday I decided to upgrade my image from Blackhole 3.0.1 to Black Hole 3.0.2.F Kodi. I did everything from scratch and have it setup the same as my old image. But I have one major problem. I lose my internet connection when I do a reboot. I always have a static ip, however to get this image connected I have to use DHCP. Once I have connected that way I can then turn off DHCP and set a static ip. Anyone know of a solution to this?
bo.
- - - Updated - - -
Problem now solved. Even though I`ve never had to do it before, I added primary dns the same as gateway and network is all ok again.
Thread can be closed now.
Thanx.
bo.
Yeah,it's still only the one 3pm game they decide to televise.
bo
That did the trick.
Thanx boss.
bo.
I have problem too. It just won't open. I've tried reinstalling it on my Blackhole 3.0.1f image. It installs and shows in plugin menu but doesn't open.
bo.
