Posts by scooby71

Hi guys at last got it pass installing ubuntu now for the next bit I,m trying to install cccam this is the instruction on how to do it

On Line 12 you will see this

OWNER=share4u

You need to edit this to reflect the account name you used to install Ubuntu. I used cccam so mine will now look like this

OWNER=cccam

Repeat this step on the following files:

cccam_install_package/UbuntuInstall.sh
cccam_install_package/LogCleanUp.sh

You should have done this three (3) times now. DO NOT EDIT ANY OTHER FILE OR IT WILL NOT WORK.
Once edited place the folder cccam_install_package and the file UbuntuInstall.sh in the TMP folder, click on places computer then your drive, you will see /tmp/

what does it mean you have to do this 3 times also is this the correct way that i,m doing it
OWNER=cccam (e.g )
cccam_install_package/UbuntuInstall.sh
cccam_install_package/LogCleanUp.sh
chown $OWNER /tmp/cccam_install_package

if this is corrct the nest step is

Click applications, and then open Terminal.
Type in:
sudo –i
It will ask you for your root password insert it now
It will now display this:
root@ubuntu:~#
Type the following:
chmod 755 /tmp/UbuntuInstall.sh
/tmp/UbuntuInstall.sh

The installation will now begin. The script will ask you one question you need to select “Standalone” when it is complete the script will reboot Ubuntu for all other questions just press yes.

but when I put this in
chmod 755 /tmp/UbuntuInstall.sh
/tmp/UbuntuInstall.sh

it comes up no such file or directory found ,what am,i doing wrong yet again I need your help

Hi update when I log in as my own username & password and then put in sudo -i it then comes up root@server1 then I enter my password and it says command not found, what do I do now

Hi I,m installing unbuntu again but when it comes to username for account and I put root it comes up username you entered root is reserved by this system,please select a different one,what do I do now

No I,m not logged in as root I used a different name

Hi folks I,m trying to build an ubuntu server using 12.04lts but are having problems after I finish installing unbuntu ,looking at sites on how to install it then ask you to set up a static ip sddress,see eg. below but when i put in vi /etc/network/interfaces,it only brings up iface eth0 inet dhcp no address or anything so when I try to put it in manual I cannot save it,this is my first attempt trying to set up a server but its getting to be a pain ,when I log into with my password I can seen a dhcp address but when I try to log int putty it will not access it ,also when I,m installing unbuntu do I need an Ethernet cable connected at that stage or not,hope someone will try to help me move on ta

Configure The Network
Because the Ubuntu installer has configured our system to get its network settings via DHCP, we have to change that now because a server should have a static IP address. Edit /etc/network/interfaces and adjust it to your needs (in this example setup I will use the IP address 192.168.0.100):

vi /etc/network/interfaces

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1

Hi I have downloaded debian 6.0.4 I install it to my server comes up with this message
MINIMAL BASH-LIKE LINE EDITING IS SUPPORTED.FOR THE FIRST WORD,TAB LISTS POSSIBLE COMMAND COMPLETION'S.ANYWHERE ELSE TAB LIST POSSIBLE DEVICE FILE COMPLETIONS

grub> _

what do I do from here can anyone advise

Hi sorry have just found it going to try it now

Hi sorry but can you give me the link to the big yellow button to download the debian 6.0.4 please ta

Hi can someone point me in the right direction on what debian software to use to begin a server,there is a link to the debian website after that what link do you use to download the software I have tried a few but with no luck,hope someone can put me right ta

Hi many thanks for your help got it sorted ta

Hi this is my set up I have a a motorised dish with a twin lnb and yes one cable that loops through the motor then to Tuner A and the second cable goes direct to Tuner B

Hi looking to try and set up a new server Debian 6 is there any manuals out there say with photos so you know step by step guide what you have to fill in to say get it to work with cccam

Hi this is my findings:using the dual tuner 2 cables connected to dish & 2 cables to the receiver configured the 2 tuners one to advanced and the other to equal had it on 28.2 can record 1 programme or more and watch another programme without any problems once the recording off both channels have finished I can now move the dish now for the fun bit!! try to move the dish say to 13east will not move or to any other satellite but once I go into my tuner settings and disable the 2nd tuner to not configured the dish will move to any satellite without any problems,has anyone else have this to do and if I want to record and watch another programme at the same time I have to go back into my settings to enable the 2nd tuner to equal

At least someone else has got the same problem so it could be the box or the image will have to try a new image and see from there will post my findings later this week thanks for the reply

Hi I have a VU+DUO dual tuner receiver connected to a motorised dish from time to time it will not move the dish then I have to go back to my old receiver to make the dish move a pain in the backside as its a great receiver ,can anyone explain why this receiver does this from time to time and how can it be fixed

Hi I have the VU+duo twin tuner receiver and 1m motorised dish ,would like to use the twin tuner with my motorised dish so I can watch prog and record prog at the same time on the same transponder,is this possible to do with a motorised dish why I,m asking this is I bought a quad lnb had it installed today but was only get a few channels,or will this work better with a motorised dish and a fixed dish. Please help ta

Hi just to say many thanks for all your support its good to see, got it up and going

Hi I just bought VU+Duo flashed Blackhole 1.7.2 image no problem cccam was not in the menus so have to downloaded cccam manually I have got cccam 2.2.1 ipk file but I,m having trouble getting it installed through filezilla,dcc,vu control centrebut cannot get the cccam menu up on VU+duo,here is what I have done filezilla say open the programme up goto temp transfer cccam file over ,goto the box menu to ipk brings up the file download file comes up on screen finished switch box off and on but cannot find the menu for to start the cccam ,so I have tried VU+ control centre there is a button for ipk installer tried that but does not complete the transfer ,dont know if the wrong that I have downladed for cccam is the fault or is it the way that I have done, this can anyone explain this to me to help me out or do I have to download an image with cccam installed on it,if so what image do I look for.

Hi the server is 2 years old a friend set this up for me,I dont know alot about the ins and outs of a server this has been going on since the day its been set up sometimes it can go for about 2months without no problems then it could go off once a twice a day you mentioned scripts and logs how do I go about finding those

Hi I have a Debian server going the problem is it keeps cutting of about twice a day my internet is on 24/7 100% of the time no problem with that,just my server my line just cuts of the, server does not close down at all can anyone help me before I smash this to bits ta