Posts by ettore88

    HI guys!!!I have WorldVision Force 1+ box..(mipsel)I lost days to understand the problem with the Tivusat Card(italian card Nagravision3)I have many linux boxes...only this box wasn't working!I asked for an explanation on many boards...No one knows why!!!The oscam configurations were OK!


    Today i tried an old oscam(OSCAM EMU 9848).With it my TIVUSAT card works fine.If i change with a higher version my card goes ERROR!!!!



    What does it depend on?THX in advance!

    Hi guys!!!I tried to install an oscam svn on my mipsel box.I can't to start it("check the configurations on your emulator")


    Hw can I fix it?Which is path configurations for oscam normal?(not emu).I tried in tuxbox - config,but doesn't work...[emoji6]


    Sent from my SM-G900F using Tapatalk

    HI!I installed doscam 0.25 on my box with image openATV 5.1.


    I'd need of the configurations...(EMU Swiss channels,Bulsat...)Could you post the configuration for they?


    Just a curisoity...in doscam cfg(usr/keys/doscam)i see this:


    Code
    [reader]
    label                         = keyfile
    protocol                      = constcw
    device                        = /var/keys/SoftCam.Key
    group                         = 1


    /var/keys/Softcam.keys? On openATV is /usr/keys/SoftCam.Key and not /var/keys/SoftCam.Key


    I have to change the path?(from /var/keys to /usr/keys?THX in advance!

    Many thx 4 your support!I tried,but nothing...


    here my log:


    What do you think?

    Hi guys!!!As said previously i installed oscam in my Force 1+...(mipsel)


    It's all right(EMU OK,BISS KEYS OK...)The only problem is my TIVUSAT card


    My oscam configurations:



    Here my log:


    What do you think about it?Hw can i fix it?THX in advance!

    Hi guys!!!I tried these configurations,but I have many freezes! I have a white card.(0963).Hw can I fix it?Where can I find the 0963 configurations?


    Sent from my SM-G900F using Tapatalk

    Hi guys!!!I purchased a new box.It's a the World Vision Force 1+(mipsel).I put your oscam conf for SKY UK(FTV modality).I have a white card.(SkY UK)


    My image is openATV 5.1.I get this error:



    HTML
    2016/02/11 11:07:45   554930 r   (reader) skyuk [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(999:Unknown error 999)
    2016/02/11 11:07:45   554930 r   (reader) skyuk [internal] Deactivating card
    2016/02/11 11:07:46   554930 r   (reader) skyuk [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(999:Unknown error 999)
    2016/02/11 11:07:46   554930 r   (reader) skyuk [internal] Deactivating card
    2016/02/11 11:07:48   554930 r   (reader) skyuk [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(999:Unknown error 999)
    2016/02/11 11:07:48   554930 r   (reader) skyuk [internal] Deactivating card
    2016/02/11 11:07:49   554930 r   (reader) skyuk [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(999:Unknown error 999)
    2016/02/11 11:07:49   554930 r   (reader) skyuk [internal] Deactivating card
    2016/02/11 11:07:51   554930 r   (reader) skyuk [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(999:Unknown error 999)
    2016/02/11 11:07:51   554930 r   (reader) skyuk [internal] Deactivating card


    My oscam is enigma2-plugin-cams-oscam-svn10678-skyuk-0960_openatv_all.ipk



    I changed 0960 to 0963(white card)It doesn't work!Hw can i fix it?THX in advance!

    Hi guys!!!I have an Amiko Alien2 box...I installed the last openPLi image.


    Unfortunately i can't find the oscam script(the starting and stopping scripts are in etc...)


    I want to install oscam manually...


    Through FTP i I noticed the symlink of the the softcam.oscam in /etc/init.d...isn't present!!!(on the path)There is only the symlink!Why?It's very strange...



    Hw can i fix it?Normally the starting and stopping scripts are in etc ...


    HTML
    emuname = Oscam
    binname = oscam
    startcam = /usr/bin/oscam -c /usr/keys
    stopcam = killall -9 oscam


    Hi guys!!!I'd try this image.Is it the last vs?


    I ask this because i installed this vs...(link)It's full of bugs!(DVB-T doesn't work!)


    HTML
    http://www.hdfreaks.cc/index.php/Thread/22711-OpenPLi-4-Gstreamer-1-7-1-STI7162/


    What are the differences between the two vs of the openPLi?


    THX in advance!!!

    Hi guys!!!Welcome back.I have an Amiko Alien2 box...i had installed openATV 4.2.I saw the news in the forums of CCCAM.PRIO...(about *sharing)


    i always use oscam with Amiko Alien2...On OSCAM what do you suggest?(CCCAM.PRIO with OSCAM is DVB API?):smile1:

    Hi guys!!!I have an Amiko Alien2 box...What should i use for biss channels?(with mcas)Keydata or mcaskey?They don't work for biss channels!I tried to change the biss channels by mcas editor,but same problem!It works only if i edit biss key by mcas menù with box remote control!Is there not something wrong here?Regards:47_002:

    Hi guys!!!My question to you.I have installed on my Amiko Alien2(openaATV)the Mgcamd 1.38d...I have installed the softcam.key...:D To my amazement i saw that Mgcamd 1.38d open just Bulsatcom(39°E) and the channels encrypt in BISS!!!<br />
    Is there not something wrong here?I've always used oscam...What I need to learn from you is how to use Mgcamd.THX in advance!!!:)


    Inviato dal mio SM-G900F utilizzando Tapatalk

    Hi master!!!I have changed my settings:
    Newcamd list
    CWS_KEEPALIVE = 300
    CWS_INCOMING_PORT = 21000
    CWS = euro-server.no-ip.org 7002 j0alm79nv soft4sa 0102030405060708091011121314


    mg_cfg G i have tried 01-33-32 I can't see nothing...



    Log File in TMP


    mgshare info --NOTHING--


    mgstat info
    Mgcamd v1.38 by mixvt, patched by D2MAC on Oct 23 2011, Tue Sep 29 13:53:46 2015
    mg uptime 00d 00h 05m 05s, service changes: 2, ecm processed: 0, lost cw warnings: 0


    Newcamd:
    Host/port Recon. Emm out Ecm out Cw in Avg. ecm time
    euro-server.no-ip.org : 7002 0 0 0 0 0


    Box: uptime = 683s, CPU load: 1 min 1108064 / 5 min 976864 / 15 min 549792
    RAM in bytes: total 118816768 / free 12529664 / shared 0 / buffers = 0
    mgcamd: total memory allocated by malloc, in bytes: 405504 (396kb), chunks 20720



    Hw can i fix it?THX again

    Many thx guys!!!I'll try tomorrow.Im at work now...THX again:09:


    - - - Updated - - -


    - - - Updated - - -


    Hi guys!!!Welcome back.I have tried,but mgcamd doesn't work...I've changed value the 32 at 01...



    These my default settings:


    [


    Hw can i fix it?THX in advance!!!:09: Amiko Alien2 mgcamd 1.38d openATV 4.2

    Hi guys!!!Please help me with oscam settings to run as newcamd client.


    Im using Amiko Alien2 box(openATV 4.2)



    These are my configurations:



    What must i change?THX in advance!!!