OpenPLI6 develop backup by hecha71
Sir please share the link of openPLI6 develop backup by hecha71
did you click on "Display Spoiler" to see the link?
OpenPLI6 develop backup by hecha71
Sir please share the link of openPLI6 develop backup by hecha71
did you click on "Display Spoiler" to see the link?
Ok aime_jeux , as i wrote in an earlier post nice and working on Zgemma sh2 OpenATV 6.2, thanks. I wonder now if there's one for Amiko Alien+ sh4 OpenAtv 6.2 'cause ithis one won't install.
Thanks Aime_Jeux up and working.....
On my AmikoAlien 2+ box MgCamd 1.38d is working quite well, no need for other cams, the line goes in usr/keys/cccamd.list and make sure in usr/keys/mg_cfg the box type is (00) . I've set it on(11) and works , when the MgCam is installed the default is (06) dreambox/mips so you must change it
I 10 link nella colonna di dx saranno sempre lì anche se il plugin non trova server liberi accesi (specialmente di notte) , non so che immagine e che decoder usi io sul vecchio Amiko Alien 2+ a volte ne carico anche 200 e più senza grossi problemi.
Credo che la versione 1.8 sia l'ultima che funzioni meglio, quelle che la hanno seguito fino alla 2.2 davano tutte dei problemi!
I think version 1.8 is last to work fine, the ones that have followed until vs.2.2 had problems!
salve scusi per l'incompetenza . la cccam su alien2 come si attiva? sono nuovo in materia
la CCcam su Amiko Alien non gira....prova Oscam o MgCam (per SH4), se hai una -line per la cccam puoi trovare delle utility per convertire (da CCcam a Oscam e da CCcam a Mgcamd) poi trasferisci i files in /usr/keys con ftp
CCcam doesn't work on Amiko Alien , you could try Oscam or Mgcam ( for SH4), if you've got a -line can find utilities to convert it and place the files in /usr/keys with ftp
Non mi aiuta nessuno......:(
Mi sa che stai facendo un po' di confusione tra CCcam ed Oscam .....Nel file cccam .cfg ci va la tua cline se ne hai una , per quanto riguarda oscam c'è una sezione apposita in questo forum per l'attivazione di carta Tivusat con relativi file, l'unica cosa che potrei suggerirti visto che oscam legge i file nella cartella usr/keys e tu inveci li hai nella cartella /usr/keys/oscam atv è quella di copiare i file dalla cartella oscam atv in usr/keys e poi riferirti a alla configurazione che trovi come ho scritto nella sezione italiana di questo forum.Ciao
If it is sh4 like Amiko Alien I don't think CCcam works on it, mgcamd or oscam will do it!
As far as I know CCcam doesn't work on .SH4, if it does I would be happy to install it on my Amiko Alien+2!
I use a very simple skin "Ultraviolet" in OpenATV 6.2, it shows the degrees from a satellites to another and also the time in secs employed to move. Probably many others skins do this , but i'm not sure you can configurate it as you like.
Display MoreDetalhes
can someone tell me step by step how to do to enter a channel list in an amiko 7162 alien2
Are you talkin' about Enigma 2 or Spark?
If Enigma 2 you ave plenty to choose in Plugin>Settings
If Spark you can download settings on line or in this Forum searching Spark settings ....when u are done put the file on a pendrive and follow the instructions on screen....shouldn't be too difficult....
e2
but do I have to use any program? and apply oscam?
E2? Then you have to choose your own settings in >Plugin>Settings! I don't know which are good for you...but this has nothin to do with oscam,. you asked about a channel list ....
can someone tell me step by step how to do to enter a channel list in an amiko 7162 alien2
Are you talkin' about Enigma 2 or Spark?
If Enigma 2 you ave plenty to choose in Plugin>Settings
If Spark you can download settings on line or in this Forum searching Spark settings ....when u are done put the file on a pendrive and follow the instructions on screen....shouldn't be too difficult....
Display MoreHello
I was installing Openpli to test on my Zgemma H9S and in between light goes off and now when it start it shows the logo and it stuck there, the front panel show logo in Red
I try everything to redo the firmware but it wont start using method in the guide book came with the box.
I tried 2 USB's but the flashing is not starting. What can i do to reflash it
Thanks
Don't know if it is your case but a friend of mine had a similar problem with his H9S as well, he put a corrupted Usb3 in the USB2 port and updated the box on line. When restarted the logo went from red to white and was stuck....after that a reflash went well and now is back to normal, the image used is OpenATV 6.2.
Just a curiosity, when you reflash it do you press the reset button on the back with the pendrive inserted and the box OFF and release it 2-3 secs after you switch the box ON?
Or you can overwrite the file >ncam< in usr/bin . So, you have to rename the unzipped file >ncam 5.9 <in >ncam< then stop the cam running and FTP it to usr/bin (attributes 755). If you also want to change the name in the softcam panel should go to /etc find the file ncam.emu and edit it from >ncam.emu 5.8 < to >ncam.emu 5.9< save exit and restart the cam. Hope this will help you!
Kiddac is right there's a USB 2 port right under the ethernet port, I bought Zgemma HS9 3 days ago and the Wi-Fi works fine.
Hi,
FTP to /etc find the file oscam.emu right click on edit and change the first line (emuname) with your version number (example : emuname =OSCam 11392 >>> OSCam 11431) shouldn't be difficult!
Thank you very much guys for the prompt assistance I much appreciate. I have tried 5 different USB sticks and none of them worked. Is there potentially any other problem that you might direct me to? I do not know what to try anymore.
Appreciate your help
Hello, i would suggets to use a 4gb Trascend , it works fine to flash my Amiko Alien 2+. What you have to do is to put the enigma 2 folder on the formatted usb stick then place it in the usb slot at the rear, push and hold the OK button in the front panel and switch on the power ,then you have to choose the CH- (down) button for enigma 2 , the word FACT will appear and then OK again ,wait until it completes the loading (about 6 or 7 mins) then you can configure the image u choose as u like....hope it'll help you!
Just installed open atv 4.2 and my tuner problem is sorted. I now want to see how to install oscam or mgcamd as its not in the plugin download section
Did you install the softcam feed?...find the ipk (sorry i can't upload it) then put it in tmp and install it, after a restart go in the plugin section green button and you will have the sofcams to download....