Posts by bigdes

hi
i tried to install sly skin from this link http://linuxsat-support.com/showthread.php?t=44759. I transfered it into usr/share/enigma 2. I then tried to restart enigma 2 using telenet command got a message saying root:password not found. I think the problem is that the tm nano doesn't have a password as i can access the box by typing root only. This is the command that i entered in the telnet to restart the engima 2
wget -O /dev/null -q http:// root:password...tate?newstate =3

At last got it all sorted don't know what the issue was with the cccam buut it's running on oscam :thumb::36_002:

Got the Oscam installed on it's own now the problem is how do I add users to the Oscam. Do I have to add the Oscam user & oscam server if so do I add them to tmp and then run chmod 755 command

Sorry guys ignore this message i'm starting to confuse myself lol

Ten below that's a brilliant idea I have my receiver running on the Oscam and it works brilliant. The only problem is I don't know how to set up the Oscam in the server on it's own as the server.

Hi
Just wondering could anybody please point me in the right direction for a CCcam and Oscam. I've got the omnikey reading the card I can see the card in Oscam r9584 but whenever I add the f lines to the CCcam.conf I can't see any clients or active clients in CCcam 2.1.3 server also there is not clients showing in thre oscam.

I'm using this file but I don't know if it works or not encase there is an updated version. I place extract the file and place it into tmp then run these commands:

chmod 755 /tmp/CCcamOscamInstall.sh
/tmp/CCcamOscamInstall.sh

Is this the correct method that I'm doing?

Hi Guys
I'm a bit furhter on thanks to help from mckee25 and the rest of you's. Just stuck on how to configure the oscam for it to read the *** card. When I go into the oscam webinterface then readers/ scan usb I can see the drivers but in the add readers it's not showing any readers. Just looking to know how to configure the oscam to read the *** card.

i went into etc then into opensc and dragged the file in and then ran the commands. My problem is I can't find the lines to edit as you can see on the first post and no flashing red light on the omnikey card reader. I'm running ubuntu server 13.10 everything else seems to be ok. I can access the server with IP;8888 and IP;16001
I can see in the server the active c lines as I'm using my tm nano as a server at the minute. Just can't get the card reader to work.

Yes I install the opensc.conf file just double checking I installed in in the correct place went into root/etc/opensc and placed it in there. Then I ran the command from your link.

I tried that command and it said command not found. Yes I have looked at the post that's the command lines I was using. Can't get the server to recognise the omnikey card reader. I can get as far as this command 'nano /etc/opensc/opensc.conf' but I can't add these changes

And change thise lines by removing # from front and reader_drivers lines u delete one comand too:

reader_drivers = pcsc, ctapi;
try_emulation_first = yes;
lock_login = false;

Remove this line;

provider_library = /lib/libpcsclite.so.1

If that is done hit from keyboard ctrl+o and enter, then ctrl+x to exit

Because the lines aren't there

This is the link I used to set-up the server and oscam http://linuxsat-support.com/showthread.php?t=16479

The card is in the correct way no data light downloaded drivers from offical omnikey website is there anyway of installing these to see if the reader is even working

Run the command that mckee25 had posted. The update one said i'm up to date. 2nd command is showing what I have in the 1st post. The last command is letting me into opensc tool reader and it is saying default driver for unknown cards. Green light on left handside of card reader. Right handside light is off. I know don't know anything on card readers so I'm relying on your knowledge.

I went into the Oscam / Readers and it's not showing that there is any readers.

Yes I can move the cursor with the arrow keys and I don't have gedit. I take it I have to manually add these lines?

not a problem

Hi I'm trying to install the omnikey using these commands

apt-get install opensc pcscd libccid

nano /etc/opensc/opensc.conf

Whenever I run the commands I'm not able to change thie lines by removing # from front and reader_drivers lines u delete one comand too as they aren't there change. See attached picture below:

reader_drivers = pcsc, ctapi;
try_emulation_first = yes;
lock_login = false;

Remove this line;

provider_library = /lib/libpcsclite.so.1

If that is done hit from keyboard ctrl+o and enter, then ctrl+x to exit

Next give command:

Hi Guys
I have tried to access openwebif and it asked for username/password had put the usual default username/ password in and it wouldn't let me access. Then I was able to access without username/password but still showing to enter the username and password as shown in picture. Later on I went to access it wouldn't let me access again asking for login details. I'm running on oscam only on my receiver can access webif without any issues with ip address followed by 8888.

This is the plugin i used enigma2-plugin-extensions-openwebif_0.2.6+git827+8482e04-r0_vuduo2.ipk

- - - Updated - - -

Got openwebif up and running happy days :36_002:

Mashup on xbmc is no longer running as the owner has shut it down :26_002:

Not a problem I do know that I have a ubuntu server that I'm going to use with the card reader if i get it working lol . By the way I would like to say thanks to all the people who helped me get the box up and running. :bravo: beer10

Hi guys
I was just wondering what would be the best card reader to read the white *** card i know there is the omnikey and smargo card reader. Just not sure what model to go for need one to run at 3.3V so I don't burn the white card out.

I have 2 Oscam/CCcam set-ups one of them the CCCams seems to be working getting all the SD channels but the Oscam doesn't seem to be working getting error forbidden when I check in the Oscam info and it's the opposite with the other one I can see the information in the Oscam info but in the CCcam info/ server it's showing up red and not getting the moives or the sports. I'm using TM Nano OE as the server.

Here is the 1st set-up it is Ubuntu Oscam Configs pictures 1 - 5

this is the 2nd set-up *** UK Oscam+CCcam config pictures 6-11

The last 2 pictures are from the 2 different set-ups