Posts by bigdes

  • Movies addon

    Hi Guys
    I'm just wondering I added the movies onto my *** package do I have to restart the Oscam and CCcam for them to work on my TM Nano. They are just SD movies. Or will these not work unless I have the card paired to a *** box.

  • Card Sharing

    Went into the box/ Oscam inof it is shows error forbidden and doesn't show any logs I have changed the Oscam server to add this ' protocol = pcsc device = 0' but i'm just wondering is it meant to be added like protocol = pcsc
    device = 0

  • Card Sharing

    Server is now showing clients in it but no active clients when I put the c line in a box up stairs it's saying the c line is online but there are no active channels. I don't understand why it is saying on the server there are no active clients and the box is saying online. :06:

  • Card Sharing

    hi guys
    everything’s working except the c line on the box i can see the clients in the server but there is no active clients this is the way i configured the f and c lines
    C: host 12000 bigdes bigdes1234
    C: host 12000 medcc medcc1234
    F: bigdes bigdes1234 2 0 0 { 0:0:2 } { } { }
    F: medcc medcc1234 2 1 0 { 0:0:2 }


    I can connect in my own network using the ip address but can't connect outside my network. When i type in displaymyhostname it is coming up as my host name as hostxx-xxx-xxx-xxx.range86-xxx.btcentralplus.com. This is not any of my registered hostnames . (Note : the f lines , c lines and the hostname on this post are for illustrations purposes only) :77:

  • Card Sharing

    Yeah I have tried 12000 and checked it with this http://www.canyouseeme.org/ it wasn't able to see the port. I have even got the firewall switched off on the router hackers will love me lol. Still not finding it. The dynamic dns is connected successfully is there anything that needs to be changed on the box or in the cccam.cfg.Whenever the server is set-up through the router I can find it on port 22 the box was only set-up for watching tv and not for sharing and i'm wondering is that the issue.

  • Card Sharing

    That's were i'm lost mate I've set the protocol as any. It's port range and translate to that i'm stuck with as I don't know what to set it to. :77:

  • Card Sharing

    Hi guys
    It's just me again lol. I've got my card working can share it with other boxes in the house. But now I'm looking to share it with my daughter who is in university. I've got the F lines and C lines all sorted. Just stuck on the port forwarding I have set it to Secure Shell Server (SSH) i have put the device as tmnano the c line works alright in my house but when I give the daughter it it is saying offline. There are no restrictions placed on the c line. Is there settings that I have to change in the box as well as the router or is it just an issue with BT home hub 5 crapy router lol.

  • dm 800 hd pvr

    Here is the image that you wanted. it's a backup one i had with a tv guide. If you use the thread instead of a private message you would have a quicker response. :40_002:


    - - - Updated - - -


    There is no point starting a thread if you are going to reply by private messages everybody's on this site to help each other out that can't be done if everybody starts sending private messages. Also if you want to say thanks there is a thanks/like bottom at the bottom of my posts on your thread. :cool: :32_002:

  • dm 800 hd pvr

    if it's cloned i'll post the bootloader and the image tomorrow they are from 2011 you'll probably not get any newer ones than that.

  • dm 800 hd pvr

    Yes as nano said make sure it's not cloned i have the bootloader and an image for the cloned one they are on a hard drive and I need to look for the hard drive. If you have no luck I'll post them on here tomorrow.


    DreamUP_Patched_dm800_clon. (2.56 MB, 389 )
    ssl76C_20100909. (414.5 KB, 322 )
    secondstage-dm800-69. (166.7 KB)
    DM800-SSL79F. (208.7 KB)

  • *** 7 Day EPG on Technomate Receivers

    *** 7 Day EPG on Technomate Receivers


    Now at last you can get a 7 Day EPG on all the Latest Technomate Receivers, models supporting Irish TV AND English TV 7 day EPG are the Technomate TM5402, TM6902 and the TM7102. All 3 receivers also allow you to record directly from the 7 day Guide, these 3 receivers are amongst the best receivers and are built with High quality components so they will last for years and years and years.


    7 day epg on astra 28.2 east this might be useful if already have one of these receivers
    6902+7102 super series +5402
    On 28 east scan tp, 11.777 v 27.500 any TV channel on this transponder, will load the 7-epg on your stb ,go into epg mode on one of those channels and within a minute the epg will populate on almost all channels.(leave for a few minutes to get full)
    for a fast 12 hr epg .scan. trp.11.469 h 27.500
    go on any channel on this transponder go into epg mode and within 20seconds you will have 12 hrs epg on almost all channels.
    You can rename one channel "7-epg" and the other "fast-epg"
    so no need to go into your radio channels
    If above is not working
    Start bellow
    1/Download new software do factory reset
    2/ Scan 11777 27500 V in 28 east
    3/ Rename a channel and add to to Favorites Rename it Epg
    4/ In "epg mode" select channel "EPG" from list and view/listen - *** propaganda etc
    6/ Return to "epg mode" and watch programmed guide being refreshed.
    7/ select in turn BBC1 HD, BBC HD, ITV1 HD, and Channel4 HD - all channels show good signal/quality strength 95%/83% but "No Audio/Video"
    8/ Select in turn BBC2, ITV1+1 etc - all these non-HD channels show normally.
    9/ Place your receiver into Standby
    10/ Reboot
    11/ All HD channels show correctly but ............... no 7 day EPG
    12/ "Normal" EPG can be refreshed by selecting each channel in turn

  • Openbox server topology

    You'd need to be more precise of what you are looking to do with the box. I have a V5S it is a basic receiver there is not much you can change on it but if there is a specific thing you are looking to like update the software or change settings or access cccam just let me know.

  • How to add a f line/ user to my server

    Guys I know you's are trying to help but you are talking to someone who doesn't really deal with servers lol. I have set the server as a fixed ip address in the router, i have set the port forwarding to the server. I have placed the f line in my tm nano oe to transfer to my c line in my server. Now i'm looking to transfer the c line that's in the server to my daughters box. I don't know if this is possible to use the server as a go between the two boxes. I have looked at that many posts and websites that I have started to confuse myself lol.


    So if you can't put the c line and f line in the same file on your server is there anyway of using the server as a go between the two boxes.