I am using openatv- will the initialize delete data on USB ?
Posts by sammyano
-
-
Hello - I am getting an error on GB800UE when trying to do a system settings backup "Sorry your backup destination is not writable, please choose another one"
My usb is connected and used for picons and EPGs and mounted as "/dev/sda1 /media/usb ext3 defaults 0 0" with fstab. Any ideas how to correct this error and allow backups. I have also checked the permission settings on the /media/usb and it has 755thanks
-
Cheers man, so GB is not quality receiver :-)
-
Have you tried 0000?
-
Hello - first you have to decide which image you want on it, my came with openMpis by default.
Steps for flashing -
format (USB) flash drive in FAT32 with smallest block-size
extract Image to flash drive and make sure that the whole directory structure (Gigablue\<boxtyp>) was extracted
safely remove flash drive
unplug power cord from box and plug flash drive into rear USB port
plug in power cord
You will have to press OK Button (covered under the flap and not the on on your remote!!) when display promts: Solo,SE: "CONF" or UE,Quad: "Image found, confirm with OK"
while flashing your LED flashes purpil. Additionaly your box displays Solo,SE: "LOAD" "E0000-E0100" or on UE,Quad: "flashing in progress"
Be patient, flashing takes a while ( Solo: ca. 30 min. SE,UE,Quad: ca 3 min. )
when finisched box reboots automaticly
you are doneFor the rest just press the blue button > plugin as download what ever you require.
-
Meekat, I am using disegc 1.2 and storing each position before I scan eg - 001 -13e, 002 - 19e, 003 - 23.5e etc.
When "dish has maybe moved slightly offline" how can I check that, cos am able to lock on other sats as I did with my previous box with the exception of 23.5ethanks
-
Guys,
Am using a motorized dish 90cm on GB HD800ue running openatv image and unable to lock 23.5e.
My settings are based on disegc 1.2, I am able to lock 13,19,28 and 42 without any problems. This same settings was working ok on Azbox HD before I switched to gigablue. So just wondering if anyone has experienced such issue with this box / image.Thanks
-
phoenix, did you understand the context of my question at all?
-
Nano, am expecting the box and wanted to gear up before arrival. I thought the boxes come with original firmware?
-
Hello guys,
Just have quick question, I have been on Azbox for a while using OE - Openatv image and decided to upgrade to Gigablue ue combo. So I wanted to know if bootloader update is required on a new box before installing any image. From my reading here it seems images are installed only via USB as opposed to using Azup tool.Thanks
-
Cheers suites, I see you are in Dublin as well.
-
Hello, so how do you access the remote created channels on the second box?
-
Update:
Here a current file3D TV (5 channels), and about 400 English movies
Have fun wishes you the team's IPTV Channel updater
thanks - I downloaded the 'English Movies' but none of them works, any idea how to make them stream?