Posts by Antepenultim8

Quote from Blackie42

Hi Guys,

Sorry to bother but I'm having same trouble.

Using a V+ zero & CCCAM but sports channels not clearing, movies OK a the moment. Dont see the CCCAM details at bottom of screen.

It was fairly easy to set up CCCAM and although heard of OSCAm nit sure what is (software addon?) or how to configure for box.

Any guide for Zero on how to install it, what version I need and how to configure?

Many Thanks

Display More

can I ask what sport channels you are trying to view

I use about 50 ext servers in my oscam
im using a 2m motorised dish and see most of europe

and have about 10 friends connected to me

some servers connect when I'm on a channel as when it's needed
and some servers are off as the person who runs that server is not online
and some servers connect because they have the lowest ecm and the ones that don't have high ecm so not required at the time

and some it maybe a mistake
I have done

ie wrong user and password
as that is where we all go wrong

I cant tell you where and why it don't connect
it's something we learn
and you will learn

Account = (user),(password)

this was used
sometime ago

it don't work anymore

when you installed OpenPLI

did you install oscam as default softcam

if yes
you may need to remove it to install the softcam you want

[reader]
label=a friend
protocol=newcamd
key=0102030405060708091011121314
device=Linux sat,10000
user=myname
password=youname
group=1

this is all I use

and I guess is all that you would need to use too

less is more

user and password

has to be
user
password

336e8f4c4108b.jpg

move to pc

that's what them arrows are for
left click file and click arrow to move

http://linuxsat-support.com/sh…nd-add-new-users-in-OSCam

I think its all explained there

[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
caid = 06ad,2600
group = 1

add the caid and you may get what you want

they work with cccam too

STATIC CW FILE : /var/keys/constant.cw

Oscam-to-OScam-share

Sport TV + 30 west

12.476 H 27500 8psk 3/4 DVB-S2

Hispasat 30 west

part of
nos and meo

they clear here

I know what cam im using
i know what box im using

and if I wanted help I would say what im using

as the more info you give the more you get back

wish I could help you

http://linuxsat-support.com/showthread.php/111937-bt-hd-gone

you tried to edit parameters

not to update

f28573ebca68e713b970e681.jpg

openATV 5.1

the info can be found in folder etc

oscam_atv_emu.emu

right click and edit to see the path

to connect wicardd to oscam

reshare

[server]
active = 1
type = newcamd525
provider = 1802:000000;0100:005221
port = 25500
key = 0102030405060708091011121314
debug = 3

[server]
active = 1
type = cs357x
provider = 1802:000000;0100:005221
port = 27500
debug = 3

[server]
active = 1
type = cccam
provider = 1802:000000;0100:005221
port = 23500
debug = 3

[account]
login = user
password = user

[account]
login = user1
password = user1

[account]
login = user2
password = user2

to reshare wicardd to oscam as im doing

tv cabo and Meo
you can use other caids to suit your own setup

cs357x
is the quickest

in oscam server

which ever one you choose above add to the oscam.server

wicardd box ip or your dns.server no-ip

device = wicardd box ip,25500
key = 0102030405060708091011121314
user = user
password = user
label = user
protocol = newcamd
group = 2

[reader]
device = wicardd box ip,23500
user = user1
password = user1
label = user1
protocol = cccam
group = 2
cccversion = 2.1.1

[reader]
device = wicardd box ip,27500
user = user2
password = user2
label = user2
protocol = camd35
group = 2

defaulft for openspa images

is

root

openspa

joeuser

i just tested it and you are right

Quote from joeuser

Tested with OpenSpa 4.0.002 BUT!!! It will not work with the modded pti.ko - you must use the original pti.ko (np) from the image.

Not a direct method yet, but a workaround using a stream relay from oscam-emu. You have to setup an IPTV streaming service which connects to your local box's oscam-emu (default port 17999) which then connects to the local box's streaming port (default 8001). But it is ALL done on the receiver without any need for PC to decode...

Basic steps.
1. Compile oscam with oscam-emu patch with minimum settings DVBAPI, EMU, and CLOCKFIX enabled.
(or use the attached version - NOTE: it was compiled with only basic emu for testing!)

2. Basic oscam.conf file:

Code

[global]
logfile                       = stdout
nice                          = -1
waitforcards                  = 0




[dvbapi]
enabled                       = 1
delayer                       = 60
user                          = user1
boxtype                       = ipbox




[webif]
httpport                      = 8888
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255

Display More

3. Basic oscam.server file:

Code

[reader]
label = oscam_emu
protocol = emu
device = Emulator




caid =  0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1




detect = cd




ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000




group = 1
emmcache = 1,2,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

Display More

4. Add SoftCam.key file to oscam config directory:

Code

P <srvid> <nb> <key>
example:
P 1234 01 11223344556677

5. Enable the "Include ECM in http streams" setting. OpenWebif -> Settings -> Customize

6. Yon can now test with VLC and connect to port 17999 instead of 8001. Some examples for AFN on 9.0E:

Code

#EXTM3U 
#EXTINF:-1,Atlantic
http://192.168.1.11:17999/1:0:1:2:1:9:5A0000:0:0:0:
#EXTINF:-1,Pacific
http://192.168.1.11:17999/1:0:1:4:1:9:5A0000:0:0:0:
#EXTINF:-1,Movie
http://192.168.1.11:17999/1:0:1:A:1:9:5A0000:0:0:0:
#EXTINF:-1,HD SPORTS
http://192.168.1.11:17999/1:0:1:B:1:9:5A0000:0:0:0:
#EXTINF:-1,Spectrum
http://192.168.1.11:17999/1:0:1:3:1:9:5A0000:0:0:0:
#EXTINF:-1,CH 8
http://192.168.1.11:17999/1:0:1:8:1:9:5A0000:0:0:0:
#EXTINF:-1,Fam/Pulse
http://192.168.1.11:17999/1:0:1:9:1:9:5A0000:0:0:0:
#EXTINF:-1,Guide
http://192.168.1.11:17999/1:0:1:7:1:9:5A0000:0:0:0:
#EXTINF:-1,News
http://192.168.1.11:17999/1:0:1:5:1:9:5A0000:0:0:0:
#EXTINF:-1,Sports
http://192.168.1.11:17999/1:0:1:1:1:9:5A0000:0:0:0:
#EXTINF:-1,Sports2
http://192.168.1.11:17999/1:0:1:6:1:9:5A0000:0:0:0:

Display More

7. To connect directly from box, use dreamboxedit to add IPTV streams to a bouquet with following settings:

Code

Stream Type :DVB/TS
        Name: (example HD SPORTS - local stream)
        URL: (url with localhost and port 17999 - example http://127.0.0.1:17999/1:0:1:B:1:9:5A0000:0:0:0)
        Service Type :1
        Service ID : 11  (must be DECIMAL - example from above url "B" -> 11)
        Transponder ID : 99 (doesn't matter)
        Network ID : 99 (doesn't matter)
        Namespace: 99 (doesn't matter)

I only tested on AFN channels on 9.0E. CPU usage was only %10-%15!

Display More

ive read this many times and is there something missing
now im no expert but where is the oscam user

[account]
user = user1
au = 1
group = 1,2,3,4

above config works with when account is included
in conjuction with workung keys

simple really