Display Morehello,
in mg.cf F= 00 ore F=01?
- - - Updated - - -
Friend technodvl2 have the full box pm ..
- - - Updated - - -
with F = 0 in mg.cfg and X {{1802} {1801}} in the replace-list..nao'da dolls in zon ...
dont use replace list
X {{1802} {1801}}
we learn all the time
after many years using this on DM
iit works better without in VU
X: {{ 1802 } { 1801 }}
in replace list
- - - Updated - - -
Glad to hear its working buddy. If you also use sky uk add this to the priority.list:
CodeP: 0963:00000 # White card P: 0960:00000 # Red card
shouln't be like this
X: { 09 63 }
X: { 09 60 }
the panic is over
they simply changed frequancy
as they sometimes do
10,832 H Dvb-s2 QPSK 22,000 3/4
kingofsat.net
your friend when your at a loss
install black hole here
http://linuxsat-support.com/showthread.php?t=86936
then install bootloader
http://linuxsat-support.com/showthread.php?t=7769
then re-install black hole again
working for me at time of posting
also I have disabled HDD until I load second black hole
Sky DE 19 east
12.031 H DVB-S2 9/10 QPSK 27,500
11,719 H DVB-S2 9/10 QPSK 27.500
11,758 H DVB-S2 9/10 QPSK 27,500
Rudylad
You are not alone
I have been trying to sort same problem on a few duo's from my family
strange that these problems started with recent images
what makes it worse is that if you use an older image they get them too
I'm now on black hole 2.1.1 and guess what
before each install i'm installing original image
do you find wether using plugins or not it's still say can't allocate memory
an image that works ok is openvixhd 78 if you can get hold of it
also try to use clearmem plugin do not use cache flush from what I have seen it makes matters worse
good luck
Movistar F1 HD
Movistar MotoGP HD
10.905 v 22000 2/3 dvb-s2 8psk astra 19.2 east
with so many changes to canal+ spain package done overnight these are one's
I've noticed
canal+ > Movistar ?
There is a problem in the settings of the satellites can not choose any moon What a bummer
- - - Updated - - -
:59::59::59::59::59:
the way it is setup is very confusing as you can't use other sat than 28 east
MENU > SETUP > FACTORY RESET
and you will have access to use all sats for multi-sat use
but you must have a saved sat list or use a new one
@Honcho
thank you for a very good back-up
if you read the line from
Julian
he gives you the best answer
it's highlighted google is brilliant
Display Moreshowcase and chelsea tv are 2 that are not clearing, with anyones list.
i've edited the transponders with so many different settings none work FEC's auto, 5/6, frequencies tried so many different, symbol rates 27,500 will remain the same.
been like this for a couple of weeks now.
regards: canthackit
OK.
After a bit of googling I've found this on kingofsat:
Astra 2E (28.2°E), 2015-04-16•Sky Digital: New FEC for Sky Sports 2 on 12110.00MHz, pol.H: FEC:5/6 ( SR:27500 SID:4208 PID:516/644 English,664 nar - VideoGuard).
There seems to be a lot of FEC changes over the last week.
well done
at least you tried something
there are 2 usb inputs at rear of box
have you tried them ?
and don't use backup's of image
until you get it working
please try
No ,not tried to install ORIGINAL image.
you maybe be surprised
ok here
have you used multiboot or meoboot with the image that works ?
you may need to disconnect HD as there maybe a conflict
have you tried installing ORIGINAL image
then the new blackhole image
what has this got to do with
Vu+ DUO2 Support
ask yourself a question
how many recievers are you going to use
remember your question as it has single twin and quad
now that is
single for one
twin for two
and quad for four
which one are you
I think I know whats going here but it hard to tell you
have you looked when in bouquet list
hit the green button
select 28.2 east
services
now you will find all channels on 28.2
you will also see there are more than one
sly sports 5
see if any work
zyga
just try to install tis the way you have
and tell us if it works
I don't think you tried it
- - - Updated - - -
ZYGA
VU + Newmarket Multiboot image VTI 7x by gutosie can be tested on all Vu +
install to tmp
then
telnet command
tar -xzvf /tmp/VU+MB_VTI_7.tar.gz -C /then
telnet command
init 2; sleep 3; init 3original post by ZYGA is a RAR file
and you would be all day and night trying to load it as it's got to be a tar.gz
I'm sure it was a mistake
