Posts by sagher

Is this any way to install oscam 11693 without upgrading to GLIBC 2.33 ?

Quote from cairo120

hi

could u please let me know it is suitable for Clone dm800 pvr sim201

thanks a lot

ezz

100% . i personally checked.

I am victim of a IP address who always try to connect with my server and sadly hack my existing user and connect with there IP anonymously.

what can i do for it?

Quote from technodvl2

what are you on about

read the config

[webif]

httpport = 16001 ( change this )

httphelplang = fr

httprefresh = 10

httppollrefresh = 3

httphideidleclients = 0

httphidetype = s,h

httppiconsize = 30

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 ( change this to your network needs )

httposcamlabel = **** oscam_pc ****

http_status_log = 1

5a330d470cc.jpg

Display More

Which Linux OS version you use?

i am using Debian 9 and it's not work for me/

Kindly add config file also

Not works in linux pc x64,

command ok but webif not open

Oscam for enigma 1 is already available here.

If you use the above release. then update it with this one. due to some error fix and remove bugs.

This is the best version of multics r84 brutus-Z with fix for all profiles/ NO LIMITATION OF USERS - PEERS - SERVERS.....

100% stable

New Text Editor

New control interface like oscam/ncam

##############################
CACHE PORT: 45000
CACHE ALIVETIME : 45
CACHE FILTER    : ON
CACHE FORWARD   : YES
CACHE AUTOADD   : YES,YES
##############################
DEFAULT DEFAULT KEY          : 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT ECM CHECK            : NO
DEFAULT ECM CHECK LENGTH     : NO
DEFAULT DCW TIMEOUT          : 5700
DEFAULT DCW RETRY            : 0
DEFAULT DCW CHECK            : NO
DEFAULT DCW HALFNULLED       : NO
DEFAULT DCW SWAP             : NO
DEFAULT DCW MAXFAILED        : 10
DEFAULT SERVER MAX           : 0
DEFAULT SERVER INTERVAL      : 100
DEFAULT SERVER TIMEOUT       : 5700
DEFAULT SERVER TIMEPERECM    : 0
DEFAULT SERVER VALIDECMTIME  : 5000
DEFAULT SERVER FIRST         : 5
DEFAULT ACCEPT NULL CAID     : NO
DEFAULT ACCEPT NULL PROVIDER : YES
DEFAULT ACCEPT NULL SID      : NO
DEFAULT ENABLE CCCAM         : YES
DEFAULT ENABLE NEWCAMD       : YES
DEFAULT ENABLE RADEGAST      : NO
DEFAULT ENABLE CAMD35        : NO
DEFAULT ENABLE CS378X        : NO
DEFAULT ENABLE SKIPCWC         : YES
DEFAULT ENABLE CACHE         : YES
DEFAULT ENABLE CACHEEX       : NO
DEFAULT CACHEEX MAXHOP       : 2
DEFAULT CACHEEX VALIDECMTIME : 5700
DEFAULT RETRY NEWCAMD        : 0
DEFAULT RETRY CCCAM          : 0
DEFAULT CACHE TIMEOUT        : 800
DEFAULT CACHE SENDREQ        : YES
DEFAULT CACHE RESENDREQ      : NO
DEFAULT CACHE SENDREP        : YES
DEFAULT CACHE STATIC         : NO

######################################################

unable to get ecm from other local servers of same vps.

Quote from zilizila

Sorry there was a mistake: g ++, it's bad.

I've already fixed it, try it again.

apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package libssnglite-dev

What special in it?

Quote from zilizila

Here is my simple How to:

Compiling oscam on Ubuntu is relatively easy. I use 18.04.1 LTS, but it also works on older and newer versions.

You must connect to a computer or server using telnet / ssh (use a small application called a putty). Select all lines at once and copy them to telnet (right-click on the cursor in telnet). The OS will start installing packages.

Code

apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g ++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip

Install this package only if you have Smargo cardreader (there may be a newer version on the sourceforge server, please check first):

Code

wget http://sourceforge.net/projects/libusb/files/libusb-1.0/libusb-1.0.8/libusb-1.0.8.tar.bz2
tar xjf libusb-1.0.8.tar.bz2
cd libusb-1.0.8
./configure; make; make install

We are now ready for the next steps!

Code

cd .. (you must go to the root directory of your system)
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn # you can also add: "-r xxxx" to the end to download a specific version of oscam. Very useful, especially if the newer version of OScam is not stable.
cd oscam-svn
mkdir build
cd build
cmake ..
make
make install # (this command will install oscam in the /usr/local/bin directory !! - if you already have an oscam binary there, make a backup of it)

Now you need to change the attributes of the oscam file to 0755. Use these commands:

Code

cd /usr/local/bin
chmod 755 oscam

You also need to set it to start automatically at boot time. Enter the following commands:

Code

nano /etc/rc.local

Write this line before the line "exit 0":

Code

/usr/local/bin/oscam -b

Press CTRL + C and confirm the changes with Y.

Now you need to create the oscam configuration files and transfer them to / usr / local / etc. You will also be able to use PSCS card readers (such as Omnikey) and Smargo!

thnx to OldSkul.

Display More

i got this error

root@xxxxxx : apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g ++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Unable to locate package g

E: Unable to locate package +

E: Regex compilation error - Invalid preceding regular expression

E: Couldn't find any package by regex '+'

E: Unable to locate package libssnglite-dev

Any Version of Linux 64bit ?

Quote from kira10

• 2021/04/17 22:13:15 747D54A8 r (reader) conax [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2021/04/17 22:13:15 747D54A8 r (reader) conax [conax] Package: 1, id: 1010, classes: 00000006, date: 2021/04/12 - 2021/05/12, name: CARD BLOCKED
• 2021/04/17 22:13:15 747D54A8 r (reader) conax [conax] Package: 2, id: 1010, classes: E2E2E22E, date: 2021/04/12 - 2021/05/12, name: CARD BLOCKED
• 2021/04/17 22:13:15 747D54A8 r (reader) conax [conax] ready for requests

RIP.

Quote from tabata

oscam emu x64 version

- emu tntsat

nagra 1811 & 1819, conax, Viaccess 6, fransat options (add keys only).

This file not works on linux x64 pc.

error : cannot execute binary file: Exec format error

Which package? and will you check the card package activated? i mean you buy or clear dues of package?

How can i install it on linux ubuntu pc?

root@xxx:~# php /root/multics_installer.php

Please install the mysql extension with: apt-get install php5-mysql

after follow it. again same error.

What is the difference between Ncam, ncam-Revcam, ncam-Supcam ?