PandaBoard ES
Like the Pi but with a bit more grunt under the hood and a higher price tag, the $180 PandaBoard ES is suited to both PC user and developer.
The diminutive board is based on an open-source hardware design, and can run several flavours of Linux, such as Ubuntu and the Android OS.
Support for a range of add-on boards allows the device to drive motors, run sensors and power LEDs, or anything else an electronics or robotics enthusiast might want to do.
Among other things, PandaBoards have been used as media centres streaming 1080p, as control units for robots, as a wearable computer, to run a gesture-control interface, and as a general-purpose Android dev tool.
Specs
Board: Core Logic OMAP4460 system on a chip.
Processor: 1.2 GHz dual-core ARM Cortex-A9 processor.
Graphics: Full HD 1080p multi-standard video encode-decode.Imagination Technologies' POWERVR SGX540 graphics core supporting APIs including OpenGL ES v2.0, OpenGL ES v1.1, OpenVG v1.1 and EGL v1.3.
Video/Audio: HDMI v1.3, DVI-D Connector, LCD expansion header, DSI support. 3.5mm audio in and out, HDMI audio out, stereo audio input support.
Memory: 1GB DDR2 RAM.
Storage: Full-size SD-MMC card cage with support for high-speed and high-capacity SD cards.
Connectivity: 10/100 Ethernet, wireless connectivity 802.11 b/g/n, Bluetooth v2.1 + EDR based on WiLink 6.0.Three USB 2.0 ports - one on the go, two host.
Expansion: General-purpose expansion header - I2C, GPMC, USB, MMC, DSS, ETM - camera expansion header, LCD signal expansion using a single set of resistor banks.
Debug: JTAG, UART/RS-232.
Other: Two configurable status LEDs, one GPIO button, sys-boot switch to boot from number of sources.
Dimensions: 4.5 inches high, four inches wide.
Weight: 2.88oz.
Cotton Candy
If you thought the Raspberry Pi was tiny, then check out the Cotton Candy, a computer that fits onto a USB stick. Billed as the smallest computer in the world,
the Cotton Candy is designed to be a computer you can carry in your pocket.
The $199 Linux-powered machine is simple and only needs a USB port for power and a HDMI-compatible display to operate.
It can be plugged into any computer or device with a USB port, hooked to a display and paired with a mouse and keyboard and it's ready to go. Cotton Candy's
manufacturers describe it as providing a secure way for people to access cloud services and apps on the move.
Specs
Processor: Arm Cortex-A9 1.2GHz.
Graphics: Quad-core ARM Mali 400MP. 480p/720p/1080p decode of MPEG4-SP/H.263/H.264 AVC/MPEG-2/VC1. OpenGL ES v2.0.
Video/Audio: HDMI 1.3a with audio for connection to devices that do not support USB mass storage.
Memory: 1GB DRAM.
Storage: Up to 64GB local microSD storage.
Connectivity: Wi-fi 802.11 b/g/n, Bluetooth 2.1 + EDR.USB 2.0 male form factor for power and connection to devices that support USB mass storage.
Supported OS: Android Gingerbread, Ice Cream Sandwich and Ubuntu.
BeagleBoard-xM
Striking a nice balance between price and power, the $149 Beagleboard-xM is the platform of choice for many home-brew electronics and robotics projects.
owered by USB, the board - which supports a range of operating systems including Linux, Risc OS and Windows CE - is suited for use as a low-cost PC or
a development platform, with 512MB allowing for software multitasking and compilation of large bundles of code.
BeagleBoard can support equipment ranging from sensors to electric motors, making it well suited to controlling electronics and robotics.
The devices are being used as a processing unit in projects to develop an autonomous ground vehicle, unmanned aerial vehicles and even a robot postman.
Specs
Board: OMAP3530 system on a chip.
Processor: 1GHz Arm Cortex-A8.
Graphics: OpenGL ES 2.0 capable 2D-3D graphics accelerator capable of rendering 10 million polygons per second. HD video capable TMS320C64x+ DSP for signal processing at up to 430MHz.
Memory: 512MB
Video/Audio: DVI-D, S-Video out.Stereo audio in and out for a microphone, headphones or speakers.
Connectivity: USB peripherals, MMC+/SD/SDIO interface for memory or wireless connectivity.
Power: USB.
CuBox
With 1080p video playback and infrared remote-control compatibility, the tiny CuBox is crying out for a place in the living room.
Unsurprisingly, the typical use for the $135 box is as a media centre or set-top box.
But the CuBox, which supports various Linux distributions including Ubuntu and Debian, has more tricks up its sleeve – able to function
as a thin-client device, software development platform or as part of network-attached storage setup.
The CuBox is no bigger than two inches in any direction and draws no more than three watts of power from its 5V power supply.
Specs
Board: Marvell Armada 510 system on a chip.
Processor: 800 MHz ARMv7 core
Video/Audio: HDMI and SPDIF optical audio.
Memory: 1GB 800MHz DDR3
Storage: Micro SD default 2GB.
Connectivity: 10/100/1000 Ethernet. Two high-speed USB host ports. E-SATA, microUSB device port for development uses.
Other: Infrared receiver.
Gumstix Overo
The Overo are boards that provide the guts of a computer – such as the CPU and memory – and are then mounted on different expansion boards
to change their abilities, allowing them to connect to and control different hardware.
However, don't expect them to do everything a computer can out of the box, as they need to be mounted on expansion boards to add abilities
such as hooking up to a display or connecting to Ethernet.
A strong developer communityprovides wikis and how-tos to bring new users up to speed. Gumstix Overo boards range in feature and price -
from the $115 Overo Sand to the $229 Overo FE COM – with expansion boards ranging from $27 to $129.
Specs
Gumstix Overo Earth: $149.
Board: Texas Instruments OMAP 3503.
Processor: 600MHz ARM Cortex-A8
Memory: 512MB RAM
Storage: 512MB Flash
Expandability: One 140-pin Gumstix Overo series or custom expansion board. One 27-pin camera board.
Connections: Two 70-pin connectors with 140 signals for I2C, six PWM lines, six A/D and one-wire. UART, SPI, extra MMC lines. Headset, microphone.
Backup battery. High-Speed USB host and USB one to go. One 27-pin connector with signals for camera board.
Power: Powered via expansion board - Overo series or custom - connected to dual 70-pin connectors.
Size: 17mm x 58mm x 4.2mm.
Weight: 4.3g.
Gooseberry Board
Specs
• CPU : A10 1 Ghz
• Graphics Processor : Mali 400 MHz
• Operating System : Android 4.03
• Onboard Storage: 4Gb (upgradeable by Micro SD memory card- 32 gb)
• Wifi: 802.11 b/g/n
• Connectivity: Ac jack, 1x 3.5mm Earphone Jack, 1x Mini Usb, 1x Hdmi Out, Micro Sd slot
• Compatible OS's: Android ICS, (Expected to support Ubuntu and Arm Arch linux in the future)
