Posts by G_ogi

Quote

29 Nov 2015 (git opendreambox)

linux-dreambox-3.4: xhci (USB3) fixes.. two backports from current kernel... missing in 3.4.110
enigma2: auto apply correct videomode on startup, fixed AutoResolution and other plugins
enigma2: update to 4.2.5r2:
- integrate all wizards into the startwizard
- set http timeout for servicemp3 streaming to 30 seconds
- fixed possible crash when a fake recording is used without a filename
- PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
(useful for displaying test images to optimize sharpness, contrast, brightness settings)
- fixed deadlock when more then one tuner is linked to another one (tested with unicable setup)
- fixed audio track selection in movieplayer when a old dm8k rc is used
- implement "config sections/categories" and implement them for Settings -> System -> Customize, Cec, VideoMode, StreamServer
- you can jump between sections by pressing bouquet +/-, when there is no more other section in the desired direction it will fall back to stamdard pagination
- to use this for your stuff just add something like: (_("My Config Section Header"),)
to your ConfigList when creating your setup
- fixed a possible deadlock (e.g. on media playback or streaming)
- DVDPlayer optimizations by go4dream (improved menu handling, audio track selection, subtitle selection)
- MediaCenter / MediaScanner:
- Add "Album Artist" based navigation to Database Browser
- fix non-all-lower-case tag keys not being recognized by the scanner
- show use scpc optimized search range when available in /proc/stb/frontend/X
enigma2: update to 4.2.5r1
update dm7080 and dm820 hardware drivers
enigma2-plugins: add and default-install enigma2-plugins-po package for plugin translations
linux-dreambox-3.4: update to 3.4.110
push libdreamdvd srcrev
Updated upstream Git repositories
enigma2: update to 4.2.4r1
qt4-embedded_4.8.5: we dont want a try .. catch(...) around the mainloop...
connman: update to 1.30, adjust patches and remove one that has been merged upstream
enigma2: update to 4.2.3r7
update dm820 hardware drivers (fixed high interrupt load since 20150902 drivers)
update dm7080/dm820 hardware drivers (just fixed reported tuner type after attach for cxd1981 hybrid tuner)
linux-dreambox-3.4: re-add native ext2/ext3 support to kernel because sometimes the data throughput is very slow when ext3 is mounted by the ext4 driver.... this then causes buffer overflows and errors in recordings
enigma2: switch back to previous service when mediacenter audio player is closed again
enigma2: fixed movieplayer crash introduced by last minute fix before public release :-(
enigma2: disable pgs/vob subtitles because of some gst-0.10 bugs
gst-plugin-dvbmediasink: push srcrev for vp8 support
update dm7080 and dm820 hardware drivers
python-coherence: include SRCPV in version
enigma2: update to 4.2.3r4
python-coherence: bump SRCREV
dreamrtspserver/gst-plugin-dreamsource: bump SRCREV
libav: move PACKAGECONFIG to opendreambox.conf, use default PV in combination with a wildcard for the PREFERRED_VERSION
enigma2: update to 4.2.3r3
libav: switch to 9.8 (requried for cover art extraction)
python-coherence: bump SRCREV again
python-coherence: bump SRCREV
Updated upstream Git repositories
python-coherence
enigma2-core-plugins.inc: add summary for systemplugins-remotecontrolselection (requires enigma2 update)
update enigma2-plugins to git12-r0.3

Display More

http://www.tunisia-dreambox.info/tsimage-feed/index.php?dir=unstable/4.0/images/dm820/&file=TSimage_4.0-deb-dm820-20151129.tar.xz

Quote

29 Nov 2015 (git opendreambox)

linux-dreambox-3.4: xhci (USB3) fixes.. two backports from current kernel... missing in 3.4.110
enigma2: auto apply correct videomode on startup, fixed AutoResolution and other plugins
enigma2: update to 4.2.5r2:
- integrate all wizards into the startwizard
- set http timeout for servicemp3 streaming to 30 seconds
- fixed possible crash when a fake recording is used without a filename
- PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
(useful for displaying test images to optimize sharpness, contrast, brightness settings)
- fixed deadlock when more then one tuner is linked to another one (tested with unicable setup)
- fixed audio track selection in movieplayer when a old dm8k rc is used
- implement "config sections/categories" and implement them for Settings -> System -> Customize, Cec, VideoMode, StreamServer
- you can jump between sections by pressing bouquet +/-, when there is no more other section in the desired direction it will fall back to stamdard pagination
- to use this for your stuff just add something like: (_("My Config Section Header"),)
to your ConfigList when creating your setup
- fixed a possible deadlock (e.g. on media playback or streaming)
- DVDPlayer optimizations by go4dream (improved menu handling, audio track selection, subtitle selection)
- MediaCenter / MediaScanner:
- Add "Album Artist" based navigation to Database Browser
- fix non-all-lower-case tag keys not being recognized by the scanner
- show use scpc optimized search range when available in /proc/stb/frontend/X
enigma2: update to 4.2.5r1
update dm7080 and dm820 hardware drivers
enigma2-plugins: add and default-install enigma2-plugins-po package for plugin translations
linux-dreambox-3.4: update to 3.4.110
push libdreamdvd srcrev
Updated upstream Git repositories
enigma2: update to 4.2.4r1
qt4-embedded_4.8.5: we dont want a try .. catch(...) around the mainloop...
connman: update to 1.30, adjust patches and remove one that has been merged upstream
enigma2: update to 4.2.3r7
update dm820 hardware drivers (fixed high interrupt load since 20150902 drivers)
update dm7080/dm820 hardware drivers (just fixed reported tuner type after attach for cxd1981 hybrid tuner)
linux-dreambox-3.4: re-add native ext2/ext3 support to kernel because sometimes the data throughput is very slow when ext3 is mounted by the ext4 driver.... this then causes buffer overflows and errors in recordings
enigma2: switch back to previous service when mediacenter audio player is closed again
enigma2: fixed movieplayer crash introduced by last minute fix before public release :-(
enigma2: disable pgs/vob subtitles because of some gst-0.10 bugs
gst-plugin-dvbmediasink: push srcrev for vp8 support
update dm7080 and dm820 hardware drivers
python-coherence: include SRCPV in version
enigma2: update to 4.2.3r4
python-coherence: bump SRCREV
dreamrtspserver/gst-plugin-dreamsource: bump SRCREV
libav: move PACKAGECONFIG to opendreambox.conf, use default PV in combination with a wildcard for the PREFERRED_VERSION
enigma2: update to 4.2.3r3
libav: switch to 9.8 (requried for cover art extraction)
python-coherence: bump SRCREV again
python-coherence: bump SRCREV
Updated upstream Git repositories
python-coherence
enigma2-core-plugins.inc: add summary for systemplugins-remotecontrolselection (requires enigma2 update)
update enigma2-plugins to git12-r0.3

Display More

http://www.tunisia-dreambox.info/tsimage-feed/index.php?dir=unstable/4.0/images/dm7080/&file=TSimage_4.0-deb-dm7080-20151129.tar.xz

- - - Updated - - -

glad you sorted :)

i'm out of ideas :( try to find a backup , which contains Albatros

INVALID IMAGE (OR OLD VERSION) means you have to flash the latest SSL.nfi first, before the box will accept a new image containing the new SSL through the web interface...

Official SSLs can be found at

http://sources.dreamboxupdate.com/

05 September 2011 - Improved flash error correction
Starting today, images for the models DM500HD, DM800 SE and DM800HD PVR include an [I]improved flash error correction[/I] feature.
In order to benefit from the improvements, it is required that you either flash the new image with the [I]latest[/I] version of DreamUP (V1.3.3.9) or flash a new second stage loader ( DM500HD DM800HD PVR DM800 SE ) [I]before[/I] flashing the image via your browser or other means.
If you use the online update functionality, the new second stage loader will automatically be installed after rebooting.
[I]It is recommended that you flash the new image for improved stability.[/I]

have you extract the .zip file? you need .nfi to flash

Newnigma2 Team stopped to make ˝stable˝images. For them is unstable=stable image.

Here is the last stable LEAN image

http://board.newnigma2.to/wbb3/index.php?page=DownloadDBFileDownload&dataID=191

Here is the last stable image

http://board.newnigma2.to/wbb3/index.php?page=DownloadDBFileDownload&dataID=192

After flash, please make online update to 4.0.13

i have also 500HD, its a great box :)

here you go mate:

newnigma2-unstable-dm500hd-29_11_2015.nfi

newnigma2-unstable-lean-dm500hd-29_11_2015.nfi

Quote from host13

Pli 4.0 for DM500 Hd original is it O.E 2.0 ?
Tnks

Yes

Here is the latest image: OpenPLi-4.0-beta-dm500hd-20151128.zip

you can try this way:

-> ftp the missing dependencies to /tmp/
-> go to telnet, and use this command

opkg install --force-depends /tmp/*.ipk

- fix weather reconnect time
- added support for "weatherlocationcode" in my_city_Code.txt and city_Code.txt
example: London-wc:UKXX0815

update is available online (setup and website)

- teledunet list updated
- swisscom readded
- tuiptv added
- jagdobd bangalian channels added
- lag10 fixed
- glwiz fixed
- glturk fixed
- glarab changed to medium quality
- tv-sport-hd.com added
- canlitvlive.org added