a good box like VU+ can handle 30 peers - then it will struggle ! to share with more you can use a pc server ! The question would then be what are your intentions ? Sharing is so we can watch all packages from across europe _ Not provide cheap knock down subscription tv. If you want to get every package across europe 30 peers should be sufficient ?
Have Fun :rikjaard2:
or you can login to your server with ssh and use the nslookup command.
make sure you SAVE and APPLY your new settings in the bthomehub3 - i use one with no problems !
What I doing wrong?
Please read the rules carefully, anyone who does not follow the rules will be warned and may be banned from this forum.
Rules:
<1> An Introduction post is required before you start using the forum, requests for support without an Introduction post will be ignored.
introductions :rikjaard1:
sry got confused
I set up this server recently
You have another server ? which cards config are you using with it ?:present:
Display Morey ***it
22:11:32 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
22:11:32 25DECF0 c (09CD&000000/0000/3427/B7:C74B): not found (93 ms) by ***it
22:11:36 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
22:11:36 25DECF0 c (09CD&000000/0000/38E0/B7:2DA4): not found (96 ms) by ***it
22:11:36 25DB930 r [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
22:11:36 25DECF0 c (09CD&000000/0000/2AA8/B7:13A6): not found (94 ms) by ***it
do you have more cards on this server ?
where are located the logs ? Thanks
LOL -
Quote from RODBOUY- from another forumDisplay MoreDid you read the wiki?
set the logfile?
logfile = /var/log/oscam.log
add that to oscam.conf
Has the card worked before? or never?
Give us as much details as poss and we can help?
logfile = /var/log/oscam.log
above worked for me !:beat_brick:
we need more info Emmisions ?
1st where are you ! Not exactly ! just the closest town or village will do ?
Great starter box and with a simple but efficient blind scan too if i remember correctly !
a 43cm ovoid elliptical antenna or a Zone1 mini dish can recieve signals from astra1@19e Hotbird@13e hispasat@30w and turksat@42e
You can recieve signals from the satellites above HOWEVER not all transponders will be available due to the dish inadequate size !
I previously used my old sly mini dish to get premiership footy FTA off turksat probably ten years ago-same with hispasat !
Foolishness and Greed ¬ The Downfall of many _ Dare i say that the name of the prosecuted man mentioned hardly sounds Belgian does it ?
What if I have a fixed IP address? Can the dyn-dns name in the cline be replaced by my IP address? Of course we presume the port 12000 (or whichever other port was configured for server listening) is properly forwarded by the router.
SAM42 ¬ Please follow the Forum Rules and make an introduction post before asking Questions on the open Forum !
Post an introduction please as per the RULES ¬
Depending which type of linux or auto install script you used will depend if everything is the same as me _ these instructions were used on my Debian set up ! Which thanks to TEN BELOW i have been using for 2 years now !
Check through your server ! in emu you will find oscam directory - in oscam directory you can see OScam.x86 file -
When i upgraded all i done was rename the original version file to OSCAM.old and FTP'd the new file into its place !
chmod 755 the file permissions - and i was upgraded ! took 2 mins - Literately !
Good Luck
:rikjaard2:
thats very interesting info rikjaard real. for six or more months my card has auto updated every month. however the last month i noticed it had not. i put it in my original box and updated within a few hours. has something changed recently to make this neccesary?
i did not have the green lines in my oscam file.
Same same ¬ Perhaps summit has changed ? All i know is i clocked my entitlements had 72 hours to run and hadn't updated as you explained previously.
I went over everything with a fine tooth comb and huge spliff joint10 AND what i have posted seems to be the general consensus !
AND more importantly worked/works as my entitlements have updated since too !
:rikjaard1:
Also check that AU option is set to 1 in the user section of OScam ¬ AU = Auto Update.
lots of English content available including BBC stations ! Yes BBC ! bbc Prime and bbc knowledge alongside bbc world available form thor the nordic satellite - you will need a subscription though - and definitely a Bigger dish !
All in all you will find plenty of English content ¬ The dutch based stations are nearly always broadcasting in english.
Befriend your Audio button -many foreign dubbed films can be switched to the original american/english soundtrack.
Phone sLy and explain you have been away for 2 months and the box has been off the entire time - unplugged at the wall - Better still you could cock and bull a FLOODED in the summer story meant you just got back into your property after building work has finally finished and the box has been off all that time -
Your configs require amending to allow the unique and shared emms to be saved to the card -thus allowing entitlements update message through to the cards memory -
Add the 2 green lines to your OScam configs.
Then when your card has been switched on in the original box it should update through oscam in the future ¬
just keep your eye on the READER section of the web interface - when you see EMMS WRITTEN section has /1 in the unique section you know your entitlement updates are getting through !
Quote from brendanj9554;86367</p><p><br></p><p>[readerDisplay More
label = slyuk
protocol = pcsc
device = 0
enable = 1
detect = cd
mhz = 357
cardmhz = 357
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
emmcache = 1,3,2
group = 1
caid = 0963
ident = 0963:000000
lb_weight = 101
ecmwhitelist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
showcls = 0
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[webif]
httpport = *****
httpuser = +++++
httppwd = *****
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000
[account]
user = *******
pwd = *******
monlevel = 0
uniq = 0
group = 1
au = slyUK
caid = 0963
very nice box - Happy xmas mate ! Check under your motor with the box on to see if there is a green light lit up - if it has one that is -
If motors move east and west (left or right) when manually driven then it is doubtful the problem is hardware based !
Did you attempt to flash a new image - you can always back up your existing settings if your worried about messing things up.
Please take a moment to adhere to the Rules and make an introduction post ¬ Look at the top of the forum R@shed.
perusing the rules would have revealed that no one gets help until they say "HELLO" - Take a moment to familiarise yourself with how business is conducted here.
Thank you :rikjaard1:
