Posts by ferez

I edit some channel names with Dreamset and they load up ok on my TV but when I go to that channel the name reverts back to the original name.

Are there any settings that I can use to keep the edited names ?

Thank you .

Many thanks master G for your instructions, it is really appreciated.

Everything is now running correctly.

master G, I have installed alternative softcam manager on my octagon sf8008, with open atv 6.3, and cccam 2.3.2 is working and decoding well.

However, oscam modern 1532 is active but not decoding.

I have downloaded and extracted oscam-svn11523-solo4k-webif-dvbapi-libusb-emu796-upx and gone to properties/ security /edit but cannot find out how to change permissions to 755.

Would you mind explaining it to me?

Thanks,

ferez

Many thanks master G, I will let you know how I get on.

Thanks master G for the alternative softcam manager. I have an Octagon SF8008 with openatv wooshbuild. I have downloaded the ipk but do not have /usr/bin/cam folder, only /user/bin.

Where should I put the softcam manager.ipk?

Also, you say "change attributes to 755", I am very new to all this and not sure how or where i should do it.

Could you please explain very simply what to do.

Thanks again

Many thanks for the info, will try that out.

The config is the original, i have not altered it.

On my oscam.server, should i remove the lines above my own lines?

ie.

[reader]

label = emulator

protocol = emu

device = emulator

caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1

detect = cd

ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000

group = 1

emmcache = 2,2,2,0

emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000F E

--------------------------------------------------

and in oscam.server should I remove the lines above my own lines?

ie.

[global]

logfile = /dev/tty

clienttimeout = 4000

clientmaxidle = 300

netprio = 1

nice = -1

maxlogsize = 1000

waitforcards = 0

preferlocalcards = 1

dropdups = 1

lb_mode = 1

lb_save = 100

lb_reopen_mode = 1

[streamrelay]

stream_relay_enabled = 0

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

delayer = 60

ecminfo_type = 1

user = linuxsatsupport

read_sdt = 1

write_sdt_prov = 1

extended_cw_api = 2

boxtype = dreambox

[webif]

httpport = 8888

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 127.0.0.1,192.1.0.0-192.xxx.xxx.xxx

http_status_log = 1

[newcamd]

port = 10001@

key = 0102030405060708091011121314

mgclient = 1

keepalive = 1

[cccam]

port = 12000

version = 2.3.2

ignorereshare = 0

stealth = 1

keepconnected = 1

So, in other words, just copy your examples and put in my own details?

Thanks,

ferez

Thanks s3n0 for your help. I am new and not really sure what I am doing.

Here is my oscam.config:

[global]

logfile = /dev/tty

clienttimeout = 4000

clientmaxidle = 300

netprio = 1

nice = -1

maxlogsize = 1000

waitforcards = 0

preferlocalcards = 1

dropdups = 1

lb_mode = 1

lb_save = 100

lb_reopen_mode = 1

[streamrelay]

stream_relay_enabled = 0

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

delayer = 60

ecminfo_type = 1

user = linuxsatsupport

read_sdt = 1

write_sdt_prov = 1

extended_cw_api = 2

boxtype = dreambox

[webif]

httpport = 8888

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 127.0.0.1,192.1.0.0-192.xxx.xxx.xxx

http_status_log = 1

[newcamd]

port = 10001@

key = 0102030405060708091011121314

mgclient = 1

keepalive = 1

[cccam]

port = 12000

version = 2.1.3

ignorereshare = 0

stealth = 1

keepconnected = 1

[reader]

label=cam1.xxxxxx

enable=1

protocol=cccam

device=cam1.xxxxxx,9821

user=xxxxxx

password=xxxxxx

cccversion=2.3.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

cccwantemu=0

[reader]

label=cam2.xxxxxx

enable=1

protocol=cccam

device=cam2.xxxxxx,9822

user=xxxxxx

password=xxxxxx

cccversion=2.3.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

[reader]

label=cam3.xxxxxx

enable=1

protocol=cccam

device=cam3.xxxxxx,9823

user=xxxxxx

password=xxxxxx

cccversion=2.3.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

[reader]

label=cam4.xxxxxx

enable=1

protocol=cccam

device=cam4.xxxxxx,9824

user=xxxxxx

password=xxxxxx

cccversion=2.3.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

..... and the same up to cam10.

ferez

I am using oscam 11507 with openatv wooshbuild on my Octagon sf8008 but am getting the following error showing on the oscam log:

Oscam log_ date_ time p (cccam) init error from reader cam 1xx xx xx xx

(dvdapi) Demure 0 no enabled matching ecmpids-> decoding is waiting for matching readers!

Can anyone help me sort this out please? What do I need to do ( in simple terms please)

Thanks for looking,

Thanks, liaqatali88. I will give them a go.

Many thanks s3n0, will sort them out

Hi, which cccam 2.3.8 will work on my Octagon SF8008 please.

Hi,

Could someone please let me know which is the best oscam to use for my octagon sf8008 and where can I download it from?

Thanks for looking.

Thanks master G

Just got my new receiver today but am finding it extremely hard to set it up for my motorised system.

Is there an idiots guide somewhere that explains the steps in very simple terms? or can someone help me through it.

Thank you :hypnotised:

Rizwan77 I have only ordered this box today, upgrading from my Spiderbox 900hd. I know nothing about Enigma or anything else new, only cccam.

jojoz There are 4 different firmware options to choose from, pre-installed for me.

https://www.world-of-satellite.co.uk/octagon/octagon-sf8008

Whic one do you suggest please? How do they differ?

Update: just ordered it with openvix firmware.

Thank you.

jojoz, Many thanks , I think I will get one.

I know nothing about oscam, are there any videos or simple instructions that would help me?

codar - just looking at satellite with wife, got iptv on my smart tv

@jojaz - I was looking at that model. Is it good for everything that I want, cccam, oscam and my motorised system?

Thanks both for your help.

Hi, I am looking to upgrade my Spiderbox 900hd receiver. I want 4k, cccam , motorised and oscam capabilities. What do you suggest, around £100.00 please.

Thanks.