write in oscam.conf /to server and client or box with card:
disablecrccws_only_for = 0B00:000000
write in oscam.conf /to server and client or box with card:
disablecrccws_only_for = 0B00:000000
aac audio codec does not work
Does the Common interface work at all? It didn't work at all on the latest version
Hi pippomus,
unfortunately ... the same problem.
The whole process went through very quickly.
VU+ DUO 4K :
Quad Core 2.1GHz
4GB eMMC/2GB LPDDR4
VU+ DUO 4K SE :
ARM QuadCore 4x 1 500 MHz (Broadcom) / same as ULTIMO 4K
4GB eMMC/3GB LPDDR4 / same as ULTIMO 4K
Dual WIFI
wirking with - loader - v1.40; kernel 4.1.45;Python 2.7.16
Maybe it will help you?
If you use this CI+ module for Scandinavian channels the checkout our Nordic section Nordic
We have been talking about how to make it work and what modules do work.
Thank you, but this is for calbe provider SK - it is same how to CZ
Hi, please help me :saint:
I using the DVB-S system and also DVB-C to it.
Is it a Conax CAID 0B00 module
DVB-C system - (UPC)
I have purchased a DVB-C tuner - FTA programs work properly
Load status:
H / W Code 17
SW Model: 0x20D
Load Seq. No. 15
Bootloader Ver. 0
Current App ver. 15
CI Plus Information
Device Type CAM-5000
Ci + Seftware Version V1.3
CI + Hardware Identification 5000
Info Conax CA
soft - CNX-SECPLUS-3.1.3
HW- 5.1.3
System in CI status - displays CI restart approximately every 5 seconds.
Every system work same / VTI/OpenATV/OpenBlackHole/
Thank you for any information.
Hi, i tested this firmware, but does not work ... :(
VU+ DUO 4K SE - doesn't or missing from the menu
I like very much this image, runs very fine and the skin has a lot of informations.
Theres is just one problem with CI, i tried tree and no one workes, two aren't detect if i go in the setup common interface, and the third crash and Enima2 reboot. Those 3 CI runs good in an official opendreambox 2.5 image. Do you think it will be possible in the future than CI will work?
Now i'll try Multiboot with this image in the flash, maybe with your plugin NFR4XBoot-opennfr-6.4
Select modules from CI and manage settings. Save the settings and insert the modules into the CI. Everything works as it should.
Display MoreOpen Vision 9.3-r121
Thanks OpenVision Team
online update;
opkg update; opkg upgrade
NB! feed changed:
- GStreamer - 1.17.0.1 (latest git)
- python - 2.7.17-r0
- GCC - 9.3.0-r0
- Glibc - 2.31-r0
- OpenSSL - 1.1.1f-r0
- Busybox - 1.31.1-r0
- FFmpeg - 4.2.2-r0 (latest stable)
- exteplayer3 - 63
- wget - 1.20.3-r0
- curl - 7.69.1-r0
- GnuTLS - 3.6.12
- Binutils - 2.34
Build: audi06_19 DreamOSat Forum
openvision-enigma2-develop-extralanguage-9.3-r121-dm920_web.zip
The network is not working again.
I use DM920 on a local stream server. If I transfer it and the network does not work after it is turned on, it is unusable. :whatthefuck:
Display MoreBen uzun süre android uygulama ile oğraştım.
tecrübelerimi kısaca yazıyorum.
Öncelik android için 32 gb kart kartta çok sıkıntı yaşadım yüklenmiyor. 64 gb biraz nazlansada oluyor. 120 gb kart sorunsuz çalışıyor.
Deamelite android uygulaması klavye görmediği için haliyle kullanamadım.
gmini android9 daha kullanışlı. özellikle android kutularının üzerinde bir performans var. wifi süper. bluetooth süper.
Quote from TranslateDisplay MoreI was dealing with android application for a long time.
I write my experiences briefly.
First of all, I had a lot of trouble on 32 GB card card for android not loading. 64 gb is a little bit more likely. 120gb card works smoothly.
Since the Deamelite android application does not see the keyboard, I could not use it as it was.
gmini android9 is more useful. there is a performance especially on android boxes. wifi is super. bluetooth super.
Hi, how to you install android 9 on gemini system? Latest image is bigger than free size flash in box, if I coppy to /tmp file. Thank you for your help.
This firmware is top
Display MoreOpen Vision 9.3-r74
online update;
Code:
NB! feed changed:
GStreamer - 1.17.0.1
python - 2.7.16-r0
GCC - 9.2.0
Glibc - 2.30
OpenSSL - 1.1.1d
Busybox - 1.31.1
FFmpeg - 4.2.1-r0
exteplayer3 - 63
wget - 1.20.3-r0
curl - 7.67.0-r0
Build: audi06_19
Thank you for your reply.
I read everything thoroughly.
The most important information I revealed was:
Cacheex 3 server can be only one (I put cacheex mode 3) - a busy server.
If you have two busy servers, the second server is client of the first server mode 3 and this server will by send all cacheex with other (new) cards for next servers in kachceex 2 mode.
This combination guarantees higher utilization of chacheex.
In conclusion, essential information. If you do not have cards directly on the server, use the newcamd protocol or another better (not cccam) link between servers.
Finally, the perfect server level in terms of capacity without error.
Hi,
help me please with tips..
I have with friends more oscam servers.
We can change cache-ex between each other.
Wich cache-ex mode is ideal for 5 or more servers?
Thank you :thumbup:
Display MoreFor all who have problems with CI modules:
First pull out CI module than restart enigma
go Setup -> Softcam/CI -> Common Interface -> CI Option Mode -> CI Legacy -> and EXIT all
Push CI Modules in and than Assign CI to Services
I apologise
you are right,
the module needs to be pulled out and the settings adjusted.
automatic setup does not work
Display MoreOpen Vision 9.2-r64
Thanks: OpenVision Team
online update;
opkg update; opkg upgrade
NB! feed changed:
GStreamer - 1.17.0.1
python - 2.7.16-r0
GCC - 9.2.0
Glibc - 2.30
OpenSSL - 1.1.1d
Busybox - 1.31.1
FFmpeg - 4.2.1-r0
exteplayer3 - 63
wget - 1.20.3-r0
curl - 7.67.0-r0
Build:audi06_19 DreamOSat
Open Vision 9.2 Test images
opkg update; opkg upgrade
:thumbup:
Collected errors:
* pkg_run_script: package "busybox-syslog" prerm script returned status 127.
* prerm_upgrade_old_pkg: prerm script for package "busybox-syslog" failed
* pkg_run_script: package "busybox-inetd" postinst script returned status 1.
* opkg_configure: busybox-inetd.postinst returned 1.
Display MoreFor all who have problems with CI modules:
First pull out CI module than restart enigma
go Setup -> Softcam/CI -> Common Interface -> CI Option Mode -> CI Legacy -> and EXIT all
Push CI Modules in and than Assign CI to Services
Maybe latest version "if dont make green death"