Posts by emosim

Quote from zayden

Quote from dr.Smolett

Hi, monuser!

I have been using images from your web site for more than a year and have been waiting for the latest updates,

but to my great regret access to your site has become authorized and inaccessible to me.

Great chagrin! I hope you keep publishing new things here.

Waiting for OpenATV 6.4 for DM900 -sim2.30 -clone driver 26.02.2020.

With great respect for your work !

dr. Smolett.

Display More

There are NO updates to clone drivers, this is what it means when support is dead.

Japhar team claims their images for their Japhar Sim have updated drivers - you would have to inquire with them to find out if this is true or not.

Display More

Japhar updated their DM900UHD drivers to newer drivers (than the very old Sim 2.30 drivers).

Emo

Quote from zayden

But you raise a good point for troubleshooting. I need to find a backup from someone running a stable clone image and flash it to my box.

EXACTLY

Its image bug, I have 2 clones and with good images never had a problem.

Emo

Quote from maho33

I have original box dare not install it

there are many people who have told me this image is for clona boxes

If you cannot read it's up to you... it's clearly wrote For ORIGINAL... seems that these "many people" also need to learn to read ;o)... as well as we all would be very interested to know where you seen there is a DreamOne Clone box !

Emo

PSU or software bug in your image/driver not properly patched.

Emo

Yes the japhar forum, you can find it easily with google,

Emo

Your questions are normal, as its not easy for sure to understand.

There is no sim available for DM900UHD to use original drivers/images. If you have a clone, to use the newest clone drivers you need yo use the Japhar Sim, as the Sim 2.30 uses much older drivers.

Emo

Japhar Sim images have their own drivers, that are more recent than the ones of the old now and usupported Sim 2.30

Emo

Just record with record button of the RC,

If you want to play the .stream recording, just rename to .ts

Emo

Flash it to the box as any other image

Emo

Quote from mynameisraj786

is it possible to record iptv, in forms so many people say they can record iptv, please tell in which image and how it could be

Yes it records as well, you will have a file.stream in hdd

Emo

Quote from master64nl

Image is not flash-able fortunately.

Code

     [*] Removing volume 0 from /dev/ubi0
[*] Creating volume 0 on /dev/ubi0 (dreambox-rootfs)
Set volume size to 502444032
Volume ID 0, size 3957 LEBs (502444032 bytes, 479.2 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "dreambox-rootfs", alignment 1
[*] Creating ubifs filesystem on /dev/ubi0_0
[*] Mounting '/dev/ubi0_0' to '/mnt'
[*] Extracting '/tmp/pBYVG0' to '/mnt'
[*] Mounting '/dev' to '/mnt/dev'
[*] Mounting '/proc' to '/mnt/proc'
[*] Mounting '/run' to '/mnt/run'
[*] Mounting '/sys' to '/mnt/sys'
[*] Mounting '/tmp' to '/mnt/tmp'
Warning: Could not read CA!
Warning: Please consider updating your rescue loader!
/usr/sbin/flash-ssbl: line 23: stat: not found
sh: bad number
Fatal: Boot image is too big
Fatal: Failed to run dreambox-secondstage.postinst
[*] Unmounting '/mnt/tmp'
[*] Unmounting '/mnt/sys'
[*] Unmounting '/mnt/run'
[*] Unmounting '/mnt/proc'
[*] Unmounting '/mnt/dev'
[*] Unmounting '/mnt'

Display More

And bootloop.

It boots and works fine. This logs just checks the format of the image as if it was using DMM format that it doesnt as its an Open image.

Reflash your box, and remember that your flash memory must not be corrupted previously, so a factory image reflashing could help from the online repository via webif, as well as multiboot is not supported.

Emo

Quote from mynameisraj786

when I flash image following is message while flashing

Code

Warning: Could not read CA!
Warning: Please consider updating your rescue loader!
/usr/sbin/flash-ssbl: line 23: stat: not found
sh: bad number
Fatal: Boot image is too big
Fatal: Failed to run dreambox-secondstage.postinst
[*] Unmounting '/mnt'
umount: can't umount /mnt: Device or resource busy
[*] Unmounting '/mnt/dev'
[*] Unmounting '/mnt/proc'
[*] Unmounting '/mnt/run'
[*] Unmounting '/mnt/sys'
[*] Unmounting '/mnt/tmp'

Display More

Its normal the box expects a DMM image and the DMM image format. Open images are not using the same structure as DMM images and you will always have such warnings, that have NO importance.

Boot your box then after flashing and all will be good.

Emo

Yes this is one of the elements still on development.

Emo

Try again, confirmed working by various members. You must do something wrong.

Emo

Quote from mfaraj57

Now dvb channels are working.

i do know yet why failed in the previous setup

all i have done same except installed openpli after setup of last dreamos cvs image on the box

good job and thank you very much

:thumbup::thumbup:

Your tuner firmware was upgraded to latest firmware by the drivers as explained. Try to use the older image of june-july 2019 and it will crash the tuner with older 2019 drivers...

It looks like they upgrade the box microcode firmware, and from that moment you cannot use older images.

As you we are learning from that new box hardware, and the Two is coming after the One Combo, and soon the Seven (that looks like a DM9x0UHD).

Emo

Quote from mfaraj57

still no luck

this video demonstrates my deamone openpli setup

http://tunisia-dreambox.info/download/dreamone.avi

http://www.ourdreambox.com/dreamone/dreamone.mp4

DreamOne : OpenPLi 7.2Star 20200511 GSt 1.17.0.1 (Original)

openpli-enigma2-7.2star-dreamone_Original_GStreamer_1.17.0.1_20200511.rootfs.tar.gz

- OpenPLi 7.2Star by Japhar Team, May 11th 2020

- Python 2.7.13

- GStreamer 1.17.0.1

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

- JAM 5.3 built-in (Plugins/Addons)

- Original Sim/Chip Required

- Support by Japhar Team

MEGA Original DreamOne :

https://mega.nz/file/vi4jmLTR#AB-DvcAEO5r29nfY6XQtljsKOf0A3jWG-WLbbCQ9gRY

Info : You can also do online update thru the feeds without the need to reinstall the image.

DreamOne : OpenPLi 7.2Star 20200511 GSt 1.17.0.1 (Original)

openpli-enigma2-7.2star-dreamone_Original_GStreamer_1.17.0.1_20200511.rootfs.tar.gz

- OpenPLi 7.2Star by Japhar Team, May 11th 2020

- Python 2.7.13

- GStreamer 1.17.0.1

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- IPTV Support with Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

- JAM 5.3 built-in (Plugins/Addons)

- Original Sim/Chip Required

- Support by Japhar Team

MEGA Original DreamOne :

https://mega.nz/file/vi4jmLTR#AB-DvcAEO5r29nfY6XQtljsKOf0A3jWG-WLbbCQ9gRY

Info : You can also do online update thru the feeds without the need to reinstall the image.

Quote from emosim

Launch an update online, it will replace the drivers and dvb video will be ok.

Emo

DVB working, you need to have todays Enigma2 (20200510). So do online update.

Tuner working here, then just reflash complete image, in my side I done the update online and had non problem with tuner either.

Emo