Posts by emosim

  • DM800hd se

    Try this one, in Flash, it also supports IPTV Protocols with GStreamer/ext3player



    MEGA :

    Code
    https://mega.nz/#!hEVH0Cxb!nSZvULiF1p3xd4p1FNr5bFo2pKoaFCnHdq88wzi8Qzg


    Emo


    Quote from pawos1977

    Hi, I have problem with my clone (estar). I have bought this box about 2 years ago I now decided to change image. Already tried few images and always box working only 2-3 days. Then I have to flash this box again. Do you know what Iam doing wrong. I dont know what image I had before. Thank you.

  • How do i update Dreambox 800 se Clone with a new image

  • How do i update Dreambox 800 se Clone with a new image

    Install the JAM, and then from it get the Free IPTV Channels on the "OpenPLi Support" section (1600 channels FTA).


    Send these commands from Telnet/Putty prompt (in command mode) :


    Code
    cd /tmp
wget http://jam.japhar.com/download/addons/Japhar-addons-manager_5.2_DM_oe20_mips32el.ipk
opkg install --force-overwrite *.ipk


    Then in JAM section in Plugins, go to "Support OpenPLi 4.0/5.0+/6.0+ IPTV by Japhar"

    install "IPTV List OpenPLi 4.0 Installer (1600+ Channels) ALL OE"

    and reboot box.


    Enjoy FTA FREE IPTV Channels by Japhar Team, these will work with the image you installed


    Emo

  • How do i update Dreambox 800 se Clone with a new image

    Very good, so this confirms you have a Clone A8P Sim, so you can only use ORIGINAL images (SSL84 bootloader, and NOT SSL84a/b/c/d/f/j bootloaders/images from Sim2, Japhar or Estar).


    Recover your box with JapharFlasher, be sure you have both cables connected (RJ45 to Router and Mini USB to PC), be sure you set a proper IP that is compatible with your network for the JaphaFlasher and the DM box validating as well the Network use.


    This done, and all connected, turn on the box and JapharFlasher should recognize the box and recover it loading it's own SSL. This done, you can then flash any DM800HDse V1 original image into the box that will be then recovered.


    Emo


    Quote from meni barel

    I opened the box and I saw it’s A8P sim . How can I fix the problem No CA FOUND ?f52bc581d5a57fe81fdc10.jpg

  • How do i update Dreambox 800 se Clone with a new image

    Link :

    File
    JapharFlasher by GoodSat
    This is the original DreamUp modified to work with ALL SIMs, for Clones and Originals. Will work with Ferrari Sim, Japhar Sim, A8P Sim, and Sim2 Sim as well as the Original Sims.
    master G


  • How do i update Dreambox 800 se Clone with a new image

    JapharFlasher : Master G uploaded it a long time ago into the FileSection/Forum,

    (master G)


    Emo

  • How do i update Dreambox 800 se Clone with a new image

    It will not work, as the Sunray Tool works only with boxes that have a Sim2 sim in the box, which is not the case here....


    So only solution is to use our JapharFlasher, and then know as you perfectly correctly wrote opening the box, the model of the Sim. And then flash the image for that Sim with JapharFlasher that is the ONLY Universal tool to recover DM boxes, with any Sim or model.


    Emo


    Quote from Panda555

    https://www.singapore-dreambox…nray-flashup-and-browser/


    Here it is written how to flash Sunray HD receiver. In attach is Sunray Flash Tool.

  • How do i update Dreambox 800 se Clone with a new image

    I never seen a Sunray box with the sim glued, this happened only around 2010 with DM800HDpvr boxes where Sim 1.0 (Ferrari) were often glued (and some Sim 2.00/2.01).


    Japhar Team avoided this problem, as all our Sims can be reprogrammed directly in the box, without opening the box. But other dead teams, never reach that point... they disappeared long before, years ago... at their stone age.


    Concerning the fact of the NO CA ERROR, we already built a tool for everybody to use for all sims and boxes, it's called JapharFlasher. Use it... BUT then when you flash an image in the box YOU MUST flash an image that is working with the sim in your box, you cannot avoid this control... we cannot change that...


    or... I could yes with a good laught... YES we can if you just put a JAPHAR SIM on all boxes and it will work perfect ;o)))).


    As you perfectly correctly wrote, throw away the crap old sims (A8P/Sim2/Estar/Ferrari/Sim1.0), and use Japhar sims ! Clones are working as good as Original boxes, with Japhar Sims.


    Emo


  • How do i update Dreambox 800 se Clone with a new image

    The LCD means nothing, none of the image on the LCD is stored in the Sim card, it's stored on the ROM Bootloader in EPROM chip in box. So definitely you are not correct on this. The Sim could be any, until we see a photo of the sim inside, we will not know, but I can guarantee that the sim is NOT a Sim2 2.10 in that box... FYI.


    LCD Logo has nothing to do with the Sim insde...


    Emo


  • How do i update Dreambox 800 se Clone with a new image

    As I wrote, but it seems nobody read it, your box is a Sunray but HAS NOT A SIM2 2.10 inside, most probably an A8P Clone sim or could be any other sim like Ferrari, Estar or Japhar.


    So you have to open the box and see which sim there is, as otherwise if you flash also 100 times a Sim2 image your box with not as miracle became a box with a sim 2.10.


    Emo

  • DM8000HD : OpenPLi 7.0 20190318 (Japhar v6)

    DM8000HD : OpenPLi 7.0 20190318 (Japhar v6)

    openpli-7.0-release-dm8000-20190318_Japhar_v6.nfi



    MEGA :

    Code
    https://mega.nz/#!6zokVaJS!0UEV1WEp30eCjbOy-JJjtQCqKbShHpvxVEsJ1EHOzb8


    Important : You can install this image but then you will need your Japhar Sim to be upgraded to OS v6, you can upgrade your sim easily with the Plugin JAM 5.x, selecting first option "Japhar addons Manager" and option "Japhar Sim Card Flashing DM8000HD v6". It will upgrade your sim with 2 reboots (it can easily take 5 minutes) and you will be able to use all images v3,v5 up to v6.

  • Latest DM800HDpvr DRIVERS 20131228-OE2.0-2-g9d9e640

    Latest DM available drivers for DM800HDpvr, now available for Japhar


    DM800HD_20131228-OE2.0-2-g9d9e640_by_Japhar

    Japhar Sim required


    Download :

    Code
    https://mega.nz/#!qiw2xaRB!4h7IG6acVs5kfWVb8ZvfR8KGfqDtFA44hmEqhsYg7z8


    Tutorial

    1) Reflash your Sim with the latest Japhar OS v6

    2) Replace in your image the extra folder files with the attached new driver files

    (in /lib/modules/2.6.18-7.4-dm800/extra)