How do i update Dreambox 800 se Clone with a new image
-
- Image Flashing Support
- meni barel
- Closed
- Thread is marked as Resolved.
-
-
I opened the box and I saw it’s A8P sim . How can I fix the problem No CA FOUND ?f52bc581d5a57fe81fdc10.jpg
-
Very good, so this confirms you have a Clone A8P Sim, so you can only use ORIGINAL images (SSL84 bootloader, and NOT SSL84a/b/c/d/f/j bootloaders/images from Sim2, Japhar or Estar).
Recover your box with JapharFlasher, be sure you have both cables connected (RJ45 to Router and Mini USB to PC), be sure you set a proper IP that is compatible with your network for the JaphaFlasher and the DM box validating as well the Network use.
This done, and all connected, turn on the box and JapharFlasher should recognize the box and recover it loading it's own SSL. This done, you can then flash any DM800HDse V1 original image into the box that will be then recovered.
Emo
I opened the box and I saw it’s A8P sim . How can I fix the problem No CA FOUND ?f52bc581d5a57fe81fdc10.jpg
-
Can you send me the files I need to use for this problem please ?
-
-
Thank you 👍
-
Let us know how it goes for you :)
-
-
Like this Image its new and modern in design :thumbup:
-
Thanks everyone it's working😀 God bless everyone.1163d5139caa1.jpg
-
And last question how can I get IPTV filles ?
-
Install the JAM, and then from it get the Free IPTV Channels on the "OpenPLi Support" section (1600 channels FTA).
Send these commands from Telnet/Putty prompt (in command mode) :
Codecd /tmp wget http://jam.japhar.com/download/addons/Japhar-addons-manager_5.2_DM_oe20_mips32el.ipk opkg install --force-overwrite *.ipk
Then in JAM section in Plugins, go to "Support OpenPLi 4.0/5.0+/6.0+ IPTV by Japhar"
install "IPTV List OpenPLi 4.0 Installer (1600+ Channels) ALL OE"
and reboot box.
Enjoy FTA FREE IPTV Channels by Japhar Team, these will work with the image you installed
Emo
-
Thanks my friend I'm going to try tomorrow 👍
-
Congratulations, and never again NCF.
Regards
Panda555
-
Sorry I didn't understand how to install there is no link to download
-
Install the JAM, and then from it get the Free IPTV Channels on the "OpenPLi Support" section (1600 channels FTA).
Send these commands from Telnet/Putty prompt (in command mode) :
Codecd /tmp wget http://jam.japhar.com/download/addons/Japhar-addons-manager_5.2_DM_oe20_mips32el.ipk opkg install --force-overwrite *.ipk
Then in JAM section in Plugins, go to "Support OpenPLi 4.0/5.0+/6.0+ IPTV by Japhar"
install "IPTV List OpenPLi 4.0 Installer (1600+ Channels) ALL OE"
and reboot box.
Enjoy FTA FREE IPTV Channels by Japhar Team, these will work with the image you installed
Emo
-
How to install the code you send I don't understand
-
You need to connect with an App named Putty to open a Telnet connection to your DM800SE
If you dont have Putty i have attached it to this comment.
1. Download and extract attached file
2. Run Putty installer
3. Open Putty and enter your DM800SE IP Adress, Username (root) and password (dreambox)
Se screenshot example4. type cd /tmp and press enter button on your keyboard
Code5. Copy this text line wget http://jam.japhar.com/download/addons/Japhar-addons-manager_5.2_DM_oe20_mips32el.ipk Now inside the Putty window click with your right mouse button and the text line appear Press enter button on your keyboard and wait until command is done.
6. Now copy this text opkg install --force-overwrite *.ipk
Do the same, click with right mouse button inside the putty window and press enter button on your keyboard
and wait for command to finnish
7. Now close Putty window by typing exit and press enter button
8. Restart Enigma2 (Restart GUI)
And all is done and you have this nice plugin installed :)
Putty setup:
-
Ok thanks now I am understand better I'm going to try 👍
-
There is a newer version v.5.3
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!