You must be still running the old version on your pc, the oscam version you want to use must correspond with your oscam startup script on your pc
Posts by johndeere88
-
-
Here is a strange one guys regarding what i would call zero security routers, i fitted an evo box for a mate recently and to my surprise after 3 days they had no channels,all seems strange to me but tbvh i aint surprised really, the box had cams installed i did not put on and i know for a fact my mate or his wife would not have been able to do this either.
I was sure i stopped any form of external abuse like telnet/openwebif etc but maybe i did not do this, i defo changed the ftp pass like i always do but the box just seemed to lock up and die.===first time thats happened to me....a reflash got the box back on track anyway...
The router in question is a talk talk 5 green light blinking heep of shite, i never actually took the model number but maybe i thought i would rather die myself than waste my time looking for it...
Anyway to make things clear i went back round and reset the router via the pin option, changed default web gui pass which i probably should have done from the start.....i then done some other checks,, as usual with most factory routers upnp was turned on//now off i then explored more and seen another dreadful backdoor...flooping samba activated on the router...samba i always de-activate if its on with any box but this dalm router seems to have this on as default aswell as upnp...turn both of these off if you have this stupid router guys...
I knew there was a reason i never use stock routers but what is really worrying is most people wont actually realise how insecure thier stock router is !
I was also able to change the dns servers to google with this shitty router.....fortunately...
-
You do not need to open an external port for internal sharing so i,m not sure if i got you confused there, if i did then i,m sorry.
External ports are only required if you are intending to send each newcamd caid externally to your friends...ie one for sly/and one for germany etc although as i stated cccam via oscam sends all caids externally on one single external port providing the client has group access from your end !
port = XXXXX@098C:000000;XXXXX@1810:000000
It looks like you have added M+ to your newcamd.cfg and that should be ok..you can try what i have posted above which should allow hd at least but should not really make a diffrence to what you already have,,, again you have not posted configs.. make sure you are on the latest oscam available as there was some changes with rom 180 cards... your server friend should also be looking at this too.
Also the ports you posted,,were they just for an example on here?...they look far too close together if so and also not a good idea to show them here
-
I remember years ago oscam had this loophole where reshare was wide open as it was not implemented into the software, its not something i need now but thats good news if they have sorted that codar:-)
@hs5424 You havn't actually posted any configs,,,just reader info. infact no oscam version either of client/server.
Also if you have not already done so you need to edit the newcamd.conf with new caid/ident and port from external server for M+ and then you should see CONNECTED in oscam?
Seperate external opened ports are required for newcamd per caid if lines are sent seperately although CCcam via oscam does not require that.
Also you can delete emmcache info from both readers as thats not required.
Lets hope its a simple reshare issue buddy:-)
-
Ye that would work like codar has posted, had to do this recently due to a vu (not genuine) box refusing to format the drive no matter what image i flashed, i used a docking station plugged in via usb to my tm reciever and viola.
I seem to remember many moons ago with a dm800 i also had hdd initialization issues with open pli and all i did was install a blackhole image for the dm800 and i was able to format the drive easily,afterwhich i put my preferred open pli back on the box....note this was NOT an official BH image ofcourse, just a modified one i found on the ferrari forum i believe and i cant even remember what sim it was for but this was easily 5 years + ago.
-
Mate first thing to do is upgrade to open atv 6.1
-
As far as i,m aware dstv still uses irdeto2 so i dont know how you will get biss encryption keys for it
-
Looks like a basic but straight forward meter that should do the job, you basically need to input an active signal then i think just store the satellite.. use kingofsat for any frequency you need, you also only need 22k for diseqc switches etc so for a single satellite leave that off.
http://en.kingofsat.net/find.php?question=bbc+london
Manual i found for it too attached
-
OK what it appears to be is that the entitlements list is correct except the YEAR.
Very odd (reposted on other thread just in case anyone missed this posting in the other thread I started.
Its only odd that you cant pick up on what has already been posted, many times !
-
Ako netko daje / prodaje rsakey and boxkey za maxtv javite se u PM. Hvala!
NE RADI!!! Uparivanje CAK7
-
I think the obvious question here would be did the software you are trying to install work?
-
Anyhooo:................
(Samsung or Cisco STB) then youre paying tooooo much for something and you havent got the full package:
I,m thinking you are not the full package here sir !
-
Payservers is key with this query like samsid has highlighted ! thats where everything goes wrong when it comes to this hobby we have and still continues to this day !
CCcam gave these scumbags grief years ago and Oscam also had issues with reshare but this was mostly before twin tuner recievers were manufactured so its a weird question.
However to answer your question, you do not need 2 seperate servers for this to work which i am positive everyone here will tell you anyway, some people who have motorised systems may use european servers for multiple european packages and one single server for the country(provider) they reside in for stabilty and in turn maybe having the europen server as a possible backup.
Its just not Logical to assume 2 servers are required for one single caid on allowing a twin tuner reciever to operate, well i have never heard of it anyway..
Payservers i believe also asked which box you had which i think was already discussed here so i dont see the problem/ in any case its easy to babysit as cw encryption is sent in a certain amount of time, so for instance nds sends cw,s at around the 8 to 10 seconds mark/ nagra around the 12 to 18 second mark i think so its easy to see how many ecms are being sent anyway to see any doubling up or reshare issues.
-
Display More
WHY would you even buy a VM pack at all? Im confused or in the wrong forum
As for now: That wire is very similar if not RG-6 cable: So treat it as such:
You simply make sure the TWO ends (THE COPPER ONLY ARE TOUCHING)
To do this for a quick fix; you need to make sure the single core wire; the copper or inner / conductor (0.81 to 1.25 mm usually in diameter) are touching with no foreign or the actual local cables construction materials in the way:
So where its snapped; use a blade and strip of the the jacket; the shield and braid; so none of that is touching the inner copper:
But just cut the excess of long enough so you can twist each disconnected end into the shape of an Q or noose while intertwining each one / end Q before you do so: Making the join strong enough so that when you pull them; as if to pull them apart the two ends Q+Q now meet each other in a noose like environment:
Now put some tension on each side of the "bridge" apply some decent masking tape: Make sure the tension on the cable is akin to having two or three bricks on each side and you should have a perfect or close to perfect signal:
To do a permanent fix you simply go to the TEE and pull it up as though it were vandalized and ring VM and complain that your bandwidth has been alternating or dropping out (Since the day you snapped it)
Because they will have a view-able record or a logfile of your loss / gain dB SIgnal which stops pinging or registering when you have snapped a wire; on purpose or by mistake; when ringing them, to make it more authentic; you demand a loss of service payment which gets taken of your next bill and NO ONE gets hurt: And you just got a Contractor an extra few quid for himself:
For those of you that have no VM Tee; or multiple cut offs or are barred or cannot get a VM signal; simply buy some decent RG-6 and F connectors and use the VM Tee in from that "seemingly empty house" your neighbor sometimes resides in: Or piggy back from the actual network by lifting the ground covers which they use every 50 or 100 foot and join onto that:
Or ask the neighbors can you share or go half whack on VM broad band: I know a few people who do both of these and more:
Please do not listen or attempt to do any of this foolish behavior that has been advised by this nincompoop (snacklepuss)
I feel there there must be some heavy drugs used here to post this nonsense, or even worse that maybe meds have NOT been consumed or was it a case of let out for the day and went mad awol?
It is the season to be jolly but for goodness sake what is going on !
Do not open covers to vm cabinets/lift covers in pavements or do any of the sort/,,,,,,,,,its fraud caught red handed shit that.
In my eyes this member is nothing more than a drug or drink fueled clown that must be banished from posting anything as this is just not Civilized.
To be perfectly ohnest i think i will probably pull the pin on here myself anyway if absolute garbage like this will continue to be allowed on here.
Merry xmas all
-
Who are u talking to ?. M8
I would like to know the answer to that too:::
See Docsis who....nah time to see the Doctor i think for you and your buddy snagglepussy
-
I would not recommend connector blocks, that is for internal installation fixes with electricity cables.
Also the foam or plastic dielectric in the cable is there for a reason which is to carry the signal, ftype barrells allow this connection so almost no signal is lost.
https://www.edwardes.co.uk/en/…cxgxMYyAzElkaAhK4EALw_wcB
And if you need to connect the telephone you will require 2x of these
https://www.ebay.co.uk/itm/3M-…OjE4MTg2Nn0%3D&rmvSB=true
You only need to connect blue/and blue/white with the telephone wire so try not to buy x100 as only 2 are required.
VM are also installing pipes to stop that happening so if you are subscribed to VM then i see no reason why they wont sort this for you.
P.s if you are doing this yourself then use amalgamating tape like has been advised by inspiral
-
Hi guys. I want to know today I’m about to join vm just for the tv and gonna turn them off after a month so I get their cable will they stop my cable connection when living them after a month ?
How on earth would anyone know the answer to that question?
Also this is partly to do with the reasons all our vm bills go up,, whats wrong with just subscribing to vm for bb only? and then steal other services because you have already stated you are going to do that anyway.
Anyway what i can tell you is there was teams specifically employed to disconnect customers who cancelled thier subscriptions in certain areas, as far as i can tell it was mostly in deprived areas this happened but not only that, cables were being cut in the box meaning it was not possible to reconnect even if your cab was left open or you had cab keys at your disposal.
Tbh Nitro i am all for using a vm feed if they stupidly leave the feed on which does happen but nobody can tell you if it will still remain active after you cancel, its basically a how long is a piece of string question that.
Also if you used your brain i think you might find you will have a legally binding 14 day cooloff period anyway.
-
Your card will update on pretty much any channel mate so i would not worry too much about that side of things,,, even free to air/view channels will suffice...tbh even channels like racing uk which you dont===wont subscribe to should send emms to your card.
I have included in attachment the server cfg i feel you should use for your 0963 card but if something aint broke then leave things as they are..
You have also not stated which cam you are using to update your card?
-
I run an 0963 card for around 3 years set at 600mhz without fail with an ftdi reader using a similar config to yours so to answer your question,,, yes it should be fine.
I also ran 09CD and 09C4 caids on similar speeds in the past without problems
I was even able to manually adjust the speed on the reader using the switches to 800 and 1000 mhz, i had to edit the cfg ofcourse for these speeds to take effect but it worked.
I set the reader back to 600mhz tho as that was fast enough.
You will also have to leave unique emms open for your card whether oscam is reading the tiers correctly or not because your card will fail,,, what a hack that would be ye... close updates and card works forever haha...not happening.
-
Display More
can you please share also your tuner config
does it effect if have newly replaced vbox latest one?
thanks again
Dont think my tuner config will help you tbh,devs i also dont think update cables.xml files due to major frequency changes on the UK network and also i think due to ABM doing most of the work for everyone these days.
Your best bet is to ensure your dreambox has the latest image available and then check your ABM is suitable for it..(dreambox sev2) i dont even know what that is? The last e2 dreambox i binned was a dm800hd years ago so i,m out the loop with older gen dreamboxes if thats what you have.
