Posts by johndeere88

  • Astra 28.2° East UK Freezing and Timeout

    Quote from Loopy123

    Hi I did have a newcamd line for ages but i had to change it to a cline because of German etc

    and use ocam now no problems

    would like magamd latest and config for a cline to try thanks again great hobby I have old vu vix image.

    # EMM messages

    # 00 don't show any EMMs (default)

    # 01 show only valid EMMs

    # 02 show valid and bad EMMs with complete data display

    M: { 01 }


    # ECM messages

    # 00 don't show anything about ecm

    # 01 normal mode, show pids processed, decoded ecm and cw

    # 02 verbose mode, show valid and bad ECMs with data

    C: { 01 }


    # AU

    # 00 disable, no emm pids processed

    # 01 enable, emm pids always processed for soft-au and shared cards

    # 02 auto, emm started only if channel cant be decoded

    # 03 process emm pids for network cards update only

    A: { 01 }


    # key update (sum 01 or 02 with 04)

    # 01 update only new keys, default setting

    # 02 update all keys (used for valid PMK checking)

    # 04 enable TPS au

    # + tps SID, which pmt pid contains au pid

    U: { 05 } 0x12c0


    # config files folder (softcam, autoroll, ignore/priority)

    # 00 files in /var/keys

    # 01 files in /tmp

    T: { 00 }


    # network mode, use summ for several clients

    # 00 no network (default)

    # 01 newcamd netclient

    # 02 radegast netclient

    # 04 camd3 netclient

    # 08 gbox netclient

    # 32 cccamd netclient, card list saved as /tmp/cccamd.info

    # (ECM only, supported server version up to 2.1.1, later not work)

    G: { 33 }


    # network retry, use summ for several options

    # 00 disable

    # 01 retry every new ecm

    # 02 try to connect to offline shares every Q: seconds

    # 04 try to detect and fast reconnect to lost (and not used atm) server

    # + XX messages number and YY seconds to reconnect

    # mg will reconnect to server, if no answer to last XX ecm/keepalive or

    # if no answer for last ecm or keepalive sent for YY seconds

    # set to 0 to disable

    N: { 07 } 5 30


    # network ecm timeout in seconds

    K: { 05 }


    # newcamd dead routes connect retry, sec

    Q: { 600 }


    # network shares priority

    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)

    # 01 camd3, radegast, cccamd, gbox, newcamd

    # 02 cccamd, newcamd, camd3, gbox, radegast

    P: { 02 }


    # on screen display type

    # 00 No OSD (default)

    # 01 neutrino

    # 02 enigma

    # 03 relook

    # + user password for http auth

    O: { 00 } username password


    # on screen display Options, summ of:

    # 01 show emu ecm

    # 02 show network shares messages

    # 04 show decoding failed / fta

    # 08 show emm keys update

    # + web port to use for osd

    S: { 03 } 80


    # Log option, summ of:

    # 00 off

    # 01 network udp log

    # 02 log to console

    # 04 file, appended ! delete it by yourself, before it eat all your hdd

    # + IP udp-port log-file-name

    L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log


    # keep ecm cache, seconds

    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

    # for openbox/elanvision users with remote shares make sense to set it higher than default value,

    # to not hammer cards while timeshifting or playing crypted recordings.

    E: { 15 }


    # cache option, summ of:

    # 00 Off (default)

    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

    # 02 Ecm data cache, remember CW for (E:) time

    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

    H: { 07 }


    # reread files, summ of:

    # 00 No (default)

    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)

    # 02 reread SoftCam.Key on channel change

    # 04 reread SoftCam.Key if file changed

    R: { 04 }


    # debug, summ of

    # 00 off (default)

    # 01 debug ecm

    # 02 debug emm

    # 04 debug network ecm

    # 08 debug network emm

    # 16 debug network login

    # 32 show mem/cpu stats every 1 min

    # 64 add timestamp to log messages

    D: { 00 }


    # box type

    # 00 autodetect, change only if you think wrong type detected.

    # 01 dbox2

    # 02 dreambox

    # 03 triple-dragon

    # 04 relook

    # 05 openbox

    # 06 dreambox/mips

    # 08 stapi/kathrein

    # 09 stapi/ipbox

    # 11 stapi/openbox

    B: { 06 }


    # map all 180x nagra caids to 1801

    # default is 01

    F: { 00 }



    Mg.cfg above for use with clines/nlines,, you may have to change your # box type depending on your equipment used.


    B: { 06 } or B: { 00 } usually works but i dont know whats going on these days:-)


    Enter your cline in (cccamd.list) file (create one if its not present in the same location as your mg.cfg file... C: dns/ip address port username password


    Make sure you chmod your cccamd.list and mg.cfg to 644/// right click/properties/644/save


    Good luck

  • Cards not clearing but present

    Quote from ddinc

    I mean:I leave only one proxy in the server file.

    Status:75 cards connected.

    BUT:While zapping NOT A SINGLE CARD CLEARS

    Reader stats:90%. Ok ????

    Easy answer! your connected to a dodgy server...its very easy to manipulate caids at server end, an example is 0961 which i still see is floating around, a caid that was launched way back in 2002 by sky uk which was nicknamed as the yellow house card, since 2007 when the white 0963 card was launched caid 0961 was de-activated and became obsolete.


    Thats just one caid with one provider in one country , god knows how many other caids are blagged at server end..


    Good luck working your way through them all:-)

  • B line in sh4 receiver?

    Never heard of a B line.


    Cline = CCcam for ccam/mgcamd or oscam client

    Nline/CWS line = newcamd for cccam/mgcamd or oscam client


    Unless this is something new that i have not heard of but what you have posted above just looks like part of an mg.cfg file where lines are not added.


    Edit after a search


    # box type


    # 00 autodetect, change only if you think wrong type detected.


    # 01 dbox2


    # 02 dreambox


    # 03 triple-dragon


    # 04 relook


    # 05 openbox


    # B:{ 11 } # enigma2 enigma1 ipbox hd


    B: { 12 } # dgs ,nlb ,sifteam


    12 should work, or try oscam

  • How to Install/Update Images on DM 520 without Cable?

    Quote from MT77

    Thanks for The Reply


    Yes, It's The HD Version.. Is It Safe to Install this on The Internal Memory? Because I've Heard Some Had Issues (Tuner & Other Stuff) when Installed Non-Official DreamOS Versions on Internal + It Breaks Waranty

    To be ohnest i dont know mate, i have only ever installed open atv on various other e2 boxes without issue using usb methods or downloaded to hard drive and then flashed.


    There will be other images you can use i would have thought so maybe do some more research on various forums like blackhole/vix etc and ask there, or maybe someone else here can pitch in hopefully.

  • Kobe Bryant is dead

    Extremely sad this, i read kobi's 13 year old daughter was also in the aircraft aswell as others, 9 in total perished, lot of familys affected with this tragic accident.


    Its said to be a safe helicopter too, if there is such a thing, looking like bad weather and pilot error will be blamed here.

  • Airvpn website down

    Still banned from airvpn without a browser enabled vpn and i have been reluctant to call the provider as three's customer service is a complete disaster..


    I,m not even sure if its three thats messed this up or whether its my vpn provider, or a combination of both.


    I will call contact them both tho and get to the bottom of it when i have run out of pins to stick in my eyes :-)


    Cheers codar


    Ps got a £18 a month unlimited calls and texts with a terabyte per month allowance data from three with tethering permission...

  • Airvpn website down

    I,m using 3 mobile for my home broadband now and i cant get in via mobile or laptop while tethered to it..


    Bizarre


    Edit: i just got in, i used the inbuilt vpn on opera and viola, it appears my mobile ip is banned, no idea what that is all about but i will be asking them.


    Cheers all

  • Airvpn website down

    I'll start with Happy new year all


    Hi all, is anyone here using airvpn ?


    I have only been trying to get on the site today to change some settings but i cant get on so i,m just wondering if anyone is aware if the site has been down prior to today.


    Many thanks

  • pairing conax card

    Quote from nagra

    conax very hard, need get cwpk and rsa

    here use ali3371 and sti5211 both, all HW paired

    Cak7 is associated with nagravision as far as i knew, also when i last used a conax card i required only the rsa key with the particular conax card i had which was for provider NC+


    What packages are your conax cards for?

  • LNB's

    Το Inverto black ultra είναι πολύ καλό lnbs και τα χρησιμοποίησα στο παρελθόν. Αυτό που πρέπει να θυμάστε είναι ότι οι προσαρμογές scew είναι πολύ σημαντικές όταν προσπαθείτε να αποκτήσετε πακέτα με αδύναμα σήματα.


    Για τα περισσότερα ευρωπαϊκά πακέτα το πιάτο σας θα πρέπει να κορυφωθεί στο thor (1W) και στη συνέχεια να προσαρμόσει το scew αναλόγως.