Posts by johndeere88

    Not a fan of vix but i will stick with whats working and leave well alone for now:-)


    I just quickly checked my card and all entitlements are all there in the omnikey and no crashes, now i have a new problem haha,.. this binary here Oscam 11xxx ARM V7 with and without EMU


    Version 11501 is crashing after 15 seconds, the cams i have installed from the vix download server are fine but the one in the link above works ok as emu but soon as i activate the omnikey reader it crashes... the pcsc version thats working is 11505 i installed from vix servers and i aint bothered about the revision but there is no cacheex support which i need.


    There is always something lolz

    Thanks seagen, i think i have now sorted this using latest vix due to pcsc drivers being present now which were not with open atv.


    At first i was still having issues with oscam crashing after around 15 seconds which was the same with open atv even tho i was using a pcsc enabled oscam binary, so i then thought my configs were messed up, however i installed oscam emu as a second cam to the primary pcsc enabled cam and all seems ok.


    I,ll try my card later but things are looking good so far.


    Cheers

    If your pole is plum then try usals if you want, i assumed you had a standard bracket which makes life difficult using usals, although if you are only after a few satellites which you will be with an 80cm then i still think diseqc is best for your setup.


    Scew is really important if you are using a small dish but you are correct, diseqc arc sorts scew out on the wider scale, again assuming 13/19 and 28.2 was required i would advise its best in that situation to peak scew on 13 east as its the weaker of the three satellites.


    What brand is your dish/motor/lnb.. metal or plastic gears... what satellites do you want from this 80cm dish?

    I tried reflashing my original image first. It did not work. However I then found a strange dvbapp2 crash filedvbapp2_crash_2019-01-18_22-03-45_1547849025.log on the hdd used for recording.


    I know nothing about dvbapp2 although google suggests it allows allows the PVR function. It probably is an image problem but before I flash a new image can anyone make any sense out of the log?

    Your chosen image is VTI.... i would suggest you upload your crashlogs on websites that deal with these images. its no biggie to try another image if all else fails... backup full image and if all else does fail you can go back to square1..


    I noticed your image for vti was not current... use latest images whichever you choose because its easier to help if we know your box is genuine with the latest software and not a clone.

    Have you thought about latitude settings on your motor? and facing your motor while set to 0 degrees on true south... i install/service motorised systems myself but its few and far between these days which is probably due to clients going down the iptv route, anyway, set your bracketry up, very important this is.


    My advice to you is to use diseqc 1.2 if you have a crappy standard bracket, if you use a T+K bracket and pole you could use usals because your pole can be adjusted completely straight but it becomes messy and not really for your average DIY installer so as said use diseqc 1.2.


    You will find latitude settings for your location from various sources, google maps, websites or even your sat nav.


    Normally i would set everything up on 1 west, however because you have an 80cm dish i would tell clients to forget 1west..


    Your best to set latitude, peak your dish on 19 east and use 13/19 and 28e... to get 1 west you can but you wont get the main satellites i just mentioned and 1west combined,well certainly not reliable signals... your dish is far too small for that.


    Lnb brands and lnb scew is also extremely important...do you even use a signal meter that reads scew adjustment?


    So anyway to recap, you are pissing in the wind in this baltic weather with an 80cm dish on motorised... set latitude and stick to 13/19 and 28.2,, if you need 1 west look at a fixed dish...otherwise your legs will end up worn out with your ladder journeys and pneumonia may set in with this baltic weather.


    Good luck

    Bit of a strange one that alright, even tho you can record other channels it still looks to be image related.


    I would do a complete image backup onto usb/stick or external drive, then backup settings and configs, after that i would try other images, blackhole or open atv which i prefer for vu+ boxes but its upto yourself, after transferring all backed up files to pc you could also try formatting the drive which i assume you have already done.


    There was issues with i think it was nova while still shareable and what was happening there was viaccess were limiting the amount of sids to 1 or 2 at any one time but even if that was happening you should still be able to at least record one channel or the channel you are watching so as said is strange that.

    Hi all,

    I have been running Meo in my alien mini for the past 2 years with Ncam 1.1. Recently Sport TV1 won't clear. Sport TV 2 , 3 etc are OK. Checked the card in the original box and its fine.

    Any ideas.

    As its Nagravision kudelski could be tinkering with cak7 on test with meo, thus the reason official recievers are ok when tested.


    Ecm length changes should not really affect viewing via oscam unless ecmwhitelists or ecm header lists are used on the server but i could be wrong...best to check logs when the channel does not open.


    Updating to latest oscam or ncam is adviseable tho as nagravision cards do go through a lot of changes i have noticed, last option is opening a support ticket on the oscam streamboard or search on the board for similar tickets which i,m sure you guys may have already done.

    So who rattled your cage?


    If you have full pack with NC+ then rsa and boxkey are required....


    Certain providers do limit married channels which has always been the case...


    Get with the program rather then ranting on here !!!

    Its all very good getting encryptions working on official recievers or official cams in open source recievers.... next stage is sharing the card... ;-)

    I hope there is some smart guys that can fix this, as it seems cardsharing is now a dying hobby.

    It may seem that way and in actual fact it is dying but it will take years for Security providers to finish it completely...it has been cat and mouse for the last decade so who is to say it wont last another 5+years...


    Nds was great in the past and still is with skyde for the time being, easy card to setup and large private client base, ins bytes and overclocking etc...unfortunately nds cisco are hw pairing most providers now so i would forget it when it happens but thats just my own opinion !


    Stick to Nagravision or whats avaialble on conax if your persistent like me with cs:-) it really is a much better platform rather than internet streaming in my book so good luck all..

    Its not from any Forum

    Its a Personal ...mean to say if u need line i can give you for that please use PM service

    Anyone got a link to new forum rules..


    Can we ask for people to now send us private messages to send server lines?


    Infact why dont we all just jump on the bandwagon here :-)

    If your NDS (Cisco) encryption based card is now HW paired then it is unlikely you will reshare it via cs again !

    Canal 4k is opening for me today .....maybe christmas promo or the previous hard pairing is gone ?

    HW pairing is here to stay...however cak7 pairing is now open only if you have the correct tools and knowledge to extract the keys..


    So in other words/ your supplier has either got past the cak7 pairing methods with a local card or bought/exchanged a line.