Posts by johndeere88

  • oscam conax cas7

    Quote from sonico_5

    hi mate


    it's a hardware pairing

    providers is conax 0b00:00000 (mytv africa)

    box is SRT4675A with processor cpu STI5211

    African satellite tv mostly uses irdeto encryption which within itself is also a nightmare regarding cs due to surflock and pairing/security..i have not heard of your provider or stb but conax cards share really well and are doable.


    Your rsa key that you need will more than likely be stored on a bga chip within the motherboard of your reciever although i,m uncertain about that.


    Your best bet is to take several close up pictures of the motherboard and post them on here and similar forums to seek advice.


    It gets really technical however... the chip has to be located/confirmed for rsa location and then removed,, specific programmers like up2008 are required too to dump the chip and then other works to decipher the dump to extract the key is required which is not supported here as discussion(so be careful what you ask for)... bga chips are the most difficult i have came across to re-solder back onto boards unless you possess an rework infrared bga station with correct stencils for bga chip sizes... but it is very easy to remove the chips..if this is the case of bga it wont really matter as you will only require the rsa from the chip anyway.


    So in other words the chip would only have to be returned to the motherboard if


    A : you had engineers visiting your home

    B : you required some sort of ppv event you could not purchase

    C : You wanted to cancel and return the stb.


    Also best to send oscam logs and configs...they do help sometimes

  • Update on E2iPlayer

    Hang on a second here.... so Mr SSS... is this your new username?


    What was wrong with your old username?


    I personally made comments regarding your creation of this plugin but lets get things straight here.... i never once accused yourself of lying to anyboby...i also never insulted you or anyone else on here... if i had i would have been warned/banned from this website///


    The reason i commented is because of your persistent posts that i will not update in the future...you done this 3 times.... ok so go bye bye and stop attention seeking...haha you are doing it again...new user and post... LOL LOL LOL


    You are also coming away with comments like those who spit on you....you really need to translate what you are saying into your own language because what you are typically saying is anyone who replied to your e2i thread who you disagreed with are disgusting.


    Ofcourse its natural for someone to take time out... no need for explanations either just go/dissapear and come back to it if you want.... whats confused me once again however is that you have created this new post under a new username but yet you have still failed to explain why you persisted in telling everyone that...


    NO UPDATES IN THE NEAR FUTURE??? what does that mean... we now ofcourse know you have gone and updates are gone and only for friends and family and blah blah blah.


    I really could not care about the plugin so go away and help your personal friends and family... we dont know or care about them either because we dont know them...goodbye samsamsam

  • Can't pair my card

    Quote from seagen

    You have pcsc reader with mouse protocol have you try to connect reader as pcsc?

    If you get erors you might have PCSC wrong setup


    Use protocol PCSC and in device use 0 se example belowe


    Code
    [reader]
label     = mypcscreader
protocol  = pcsc
device    = 0
aeskey    = 0102030405060708090a0b0c0d0e0f10
group     = 4
caid      = 0600

    seagen The dudes reader in post one indicates that the pheonix reader is being used and mouse protocol is actually ok for this, i have used mouse protocol for nds cards in the past with TBS3102 readers/// uk / germany and italy cards without issues.


    putz182 Pheonix readers must have the dip switches set correctly and also configs to match in oscam so if you are unsure of this then try your omnikey as seagen has stated..set your card speed with omnikeys at 500mhz if its a 3121 model you have?


    Never seen or heard of gemalto readers? i,m assuming they are similar to omnikeys readers?


    Also you may need box id for oscam config or maybe other hidden info you cant obtain, caid 0946 could be hardware paired meaning the card will only work in official recievers or cam modules supplied.




    putz182 ,

  • oscam conax cas7

    Quote from sonico_5

    i have a conax card and box

    0b00:000000

    the card is paired with a stb box with sti5211

    so how can i share it with oscam?

    Your card could be paired to the reciever via smartcard security known as an algorithm which will more than likely be an enique RSA key... however you are not disclosing enough information because caid 0B00 is used with more than one provider.


    So what is your provider?

    Which stb do you have?


    What is sti5211? as it means nothing here and without oscam logs we all get our crystal balls out to see whether it could be wrong reader/config or RSA paired issues.


    I dont know how you ended up with your equipment but a bit homework will tell you that most conax encryptions are married to the reciever or cam..some conax card suppliers will send you the RSA key so that you can use your card in 3rd party equipment/software.


    There is also ways to extract that information from recievers or cams if you need it although expensive equipment along with knowledge is required.

  • oscam conax cas7

    Quote from sonico_5

    Hello everybody i'm looking for

    oscam conax cas7
    even private

    contact me by pm


    thanks!!

    Are you asking for cak7 oscam versions? if you are its already supported in recent public versions of oscam.


    And afaik cak7 pairing/cwpk keys are only used with nagravision not conax/you also require additional info for this from each provider/box..


    Which caid/ card have you got?

  • nc+ seca

    naszdom i think canthackit was trying to resume a seca card with a possible subscription that was underlying so to speak, the member was told the subscription should last untill expiry dates before nagravision took over...we already know this.


    canthackit i think all you can do bro is leave the box on TVP and cross your toes/willie/and ya fingers and hope for the best... mediaguard updates may take time.... in the meantime i would still pursue your supplier with information on your current situation... they may reply and who knows you might get a reduced rate on conax....long shot i know.



    Regarding nagra with NC+...extensive work has been done with cak7 recently and there is progress with not only caid 1884 but others too...

  • Help 26.0e Badr

    Thats Badr7


    Try a User defined transponder scan on your box using exactly this info below


    10970

    V

    DVB-S2

    27500

    3/4

    QPSK


    Or full scan on satellite again incase you have not already done so.

  • NC+ Conax

    Conax cards are not hardware paired so your card will operate just fine in the internal readers on both of your vu+ boxes so cardsharing will be possible.


    The other member is referring to NC+ caid 1884 which has merlin security ( cak7 ) //something you do not need to worry about.


    You will however require the rsa key for your conax NC+ card if you want to use it with 3rd party software like oscam..ensure your supplier sends this to you.


    The supplied cam is also a great tool to have with your card incase of any missed tier or other card updates.

  • BEST E2 RECEIVER WITH SENSITIVE TUNER 2018

    Quote from ak2013

    kikkikikikikikiki ...do not worry about capital letters just to emphasise the point of view

    I,m not worried.


    Block Capitols can also be viewed as shouting to another member on certain sites, obviously not here.


    But i see your point of view ! Because you probably assume i have zero intelligence you have completed half of your post in block capitols so that i understand.


    Very clever

  • nc+ seca

    Yes it was shotgun cable so both tuners were connected, i did funnily enough have issues after one program was being recorded and a second program giving issues...Both tuners were set to ON and 13 east was perfect on the twin cable so i think the reason for this was possibly the subscription or it was a setting i missed in Polish.


    One tuner should be enough for your card update as you will already know.

  • BEST E2 RECEIVER WITH SENSITIVE TUNER 2018

    Your best to provide as much info as possible when it comes to which tuner will benefit signals.


    I would have thought the majority of latest open source recievers will have pretty good tuners, some more than others albeit, i,m also a fan of vu+ myself but as said there is a lot of alternatives out there.


    As i also said above regarding info supplied, dish size/brand/ lnb brand/scew/cabling and connections used are all very important in low signal areas, and without a doubt footprint/ satellite your aiming at and location tells a larger story.

  • nc+ seca

    Ha i feel your pain again, i was called to a job around a month ago to service a polish system, when i arrived a couple from eastern europe who had just moved to the uk had an official Nc+ box plugged into a 28.2 system, all i had to do was re-align the dish on 13 east and bobs your uncle right..how wrong was i, the couple who were not polish had obviously buggered up all settings trying to get Nc+ working on a dish pointed at 28.2 and i wish i could tell you how i fixed it but i cant, the couple had broken english too and didnt speak fluent polish either so i was on my own with the setup but i got it after round half an hour or so with both tuners.


    I would have thought the official NC+ box should not really need much setting up unless settings have been messed with like i recently experienced.


    The official box i was working on had its internal slot on the side with a paired card ofcourse but i assume the box you have borrowed has a cam slot which you are trying to faciltate, i wasn;t actually looking for cam settings in the menu but i assume it must be there.


    Good luck anyway.

  • E2Iplayer (Iptv player) discussion

    pullman Check post 297///303 and 318


    This message was as you can see drilled into everyone on this very thread !


    No updates ! Understand !!!/ near future means nothing to me and there was no updates which is why i challenged mr sss.s 3rd post on his attention seeking mission...i could not give a shit about the plugin...what pissed me off was the fact a member was trying to waste other members time by saying...em no updates in near future,,,what does that mean exactly... either it works or it does not...simple as.


    Quote from samsamsam

    Hello dydyer



    In the near future there will be no update because I do not have access to any set-top-box nor to PC, I also lost my hdd with all data like workspaces for binary components builds. It fell from the desk

    As for me being ashamed of myself mr pullman...lolz...why would i feel that way?... and i,m apparantly telling lies now too... how so?


    If mr sss had a brain it would have been easy to extract members in to ease any burden /i,m pretty sure there would have been plenty of people well prepared/capable and ready for that challenge to help out...instead we get NO UPDATES...


    Is this control freak stages or dont want the work.... if so go home and give it up.


    I,m also being told i,m the cause for the e2i closure...lolz...get english classes and read this thread properly.


    Dont use e2i now if you have honour because its all mine.... I,m Mr SSS... I stole bbci streams/icefilms and yifi to name a few for my plugin...dont touch