Posts by Neo2

Hey all

What in peoples opinion would be the most user friendly operating system on a linux based machine. Would it be Open Black Hole, VIX, Open PLI etc

Hey I am looking for my sister. How much to Dublin Ireland? Can it record whilst watch?

My bad. Still getting used to forum rules. Thanks for your kind help dude

Sorry I should not of multi posted. To be honest she wants to spend around €100 to €150 for the recording one and then the cheapest one with HDMI for her bedroom. Sorry should of made that clear. I saw about vu zero but that only has 1 tuner meaning she can't record one channel and watch another. True? Is there any section on the website to buy used ones?

Hey all

My sister asked me to get her two STB's I need advice. She wants ease of use, wifi, and will be able to record and watch tv at the same time (twin tuners), have HDMI, its reliable and not expensive. She just needs a basic box that can do all of this and runs enigma 2. I need that as thats the only system I know. Ideally she would like the recording one in the living room then just a watching one in her bedroom.

It also must have an ok processor so that it has very little glitches.

Am I asking too much. Please let me know. I appreciate your time Thanks all

hi all

My sister wants me to set her up with a box. I would prefer using Enigma 2 with black hole as that's what I know.

She wants to be able to record programs with ease and the box should have wifi and HDMI. What's a reliable but not too expensive box. The cheapest one but with the ease of use and reliability and wifi if needed. Her internet is roughly 6m and ideally would like very little glitches.

Thanks for your time guys. B

Kopite

Jealous of your TV. Do you want to swap it with a 50" Pioneer Kuro LDX0590 (something like that). Saving up to buy the LG OLED 4G 55INCH. Awesome TV mate

Hey all

VU+DUO2 with Open Black Hole using master G image backup. Two questions?

1) How do I pause live TV. The pause button is not working?

2) When STB starts up how do I keep exisiting channel from previous use? It always starts up on some other channel which we never use.

Thanks all

Hey

If you are stuck for tvwhy dont you use CCCam 2.3 in the mean while. I can help you out with that. I tried with mgcamd too and could not get it to work. Spent bloody hours on it. What operating system do you have on STB?

Hey

Mgcamd 1.38c is installed, running and started with blue button. But I get nothing. In the newcamd.list I have the CSW line. I did not edit the mg_cfg file as it already had box 6 in it. I have uploaded the files for you to see.

I installed my open Balck hole box by your master g backup UK flashware. I assume thats ok. Maybe I should try and do that again?

- - - Updated - - -

Hey

This is the mgcamd file I downloaded for my vu+ duo2 with open black hole ( enigma2-plugin-cams-oscam-svn9842-mgcamd-1.38_blackhole_all.ipk)

Hey

I have a vu+ duo2 with Open Black Hole. Is it still 'B: { 06 }' because someone else said it was number 5? Thanks for your help. You do not know how much this pleases me. Thanks!

- - - Updated - - -

Ok so I have those two files (mg_cfg & newcamd.list) in user/keys.

I have these files in /etc/ BhCamConf, CCam.cfg,CCcam.chanelinfo,CCcam.providers and CurrentBhCamName, mg_cfg, mgcamd.pid, mgshare.info and newcamd.list.

What files should I have there. I just want to run mgcamd 1.38c. Please just run me through this installation. Again thanks guys

Hey all

Can someone please tell me what is the best, fastest system. Is it Mgcamd, Oscam, CCCam. Please explain it to me like I am a two year old. Thanks

Hey guys

I can't get my Mgcamd to work. In my Usr/Keys I only have two files. Newcamd.list and mg_cfg. I know I should have more. Where do I get them from. Genuinely sorry I broke house rules las time so I will be more careful. Please please help me.
Thanks

Hey guys as I have said I have the newcamd.list in there too. I am not sure if I can upload it as it has me server, but if something is wrong I don't have a clue to fix it. Hope you understand the predicament I am in. Thanks for your help

Hey guys I have none of these files in the var/keys directory. Where can I find them or how do I create ?

This is the mg__sys file that I have. I don't have a clue what you mean about box type? I have attached my mg_cfg

its a payserver. The guy says that the files says that the lines are fine and working. The Cccam 2.3 still works but as I say it gets freezes from time to time

Hey

I have tried CCcam 2.3 but found it freezes from time to time.
So I want to try Mgcamd.

I have open black hole on vu+ duo2. I want to use mgcamd 1.38 (is this the latest and quickest?). So I installed Open Black Hole on my STB then I downloaded the cams preconfigured for open black hole.

I then FTB over the newcamd.list and mg_cfg files to Var/Keys on the STB

Then I press blue on remote and choose Mgcamd 1.38. IT DOES NOT WORK

Please please please help. I am desperate and loosing what little hair I have left! Thanks

Breffni

Hi all

I have open black hole on vu+ duo2. I want to use mgcamd. My provider gave me the newcamd.list and the mg_cfg files. But when I choose 1.38 mgccamd on the blue button it does not work.

Please please please help. I am desperate. Thaks

Hey all

Just installed open blackhole but my cams are gone. The guy previously used mgcam1.3 something and I saved the configuration file.

I installed an old mgcam 1.3 but not sure if it is compatible with open blackhole. I tried to find TSmedia but I couldn't. Please help me!!!

My equipment is below:

VU+ DUO2, Black Hole 2.1.7, Idreamx 3.0.16

When I use IDREAMX, it doesn't connect to Bouquets and FTP part. A message comes up saying "Login failed". Does anyone have a clue why this is happening? However IDreamx connects to movies/epg etc/ I am really stuck please help.

If its IDREAMX what other program should I try?

Tks