Posts by weelad

  • oscam template

    Hi, I've installed ENVI template. All looks OK but Im getting a error in live log



    2016/10/07 13:12:09 1B38D73E h (webif) webif: decompressed 174283 bytes back into 424504 bytes
    2016/10/07 13:12:09 1B38D73E h (webif) WARNING: Your http disk template /etc/tuxbox/config/CSS.tpl is in the old template format without revision info. Please consider upgrading it!
    2016/10/07 13:12:09 1B38D73E h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;2221490740;1.20-unstable_svn;11273;-->
    2016/10/07 13:12:09 1B38D73E h (webif) WARNING: Your http disk template /etc/tuxbox/config/FOOTER.tpl is in the old template format without revision info. Please consider upgrading it!
    2016/10/07 13:12:09 1B38D73E h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3102184208;1.20-unstable_svn;11273;-->
    2016/10/07 13:12:09 1B38D73E h (webif) WARNING: Your http disk template /etc/tuxbox/config/HEADERSHORT.tpl is in the old template format without revision info. Please consider upgrading it!
    2016/10/07 13:12:09 1B38D73E h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;267516716;1.20-unstable_svn;11273;-->
    2016/10/07 13:12:09 1B38D73E h (webif) WARNING: Your http disk template /etc/tuxbox/config/JQUERY.tpl is in the old template format without revision info. Please consider upgrading it!
    2016/10/07 13:12:09 1B38D73E h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;667857571;1.20-unstable_svn;11273;-->
    2016/10/07 13:12:09 1B38D73E h (webif) WARNING: Your http disk template /etc/tuxbox/config/JSCRIPT.tpl is in the old template format without revision info. Please consider upgrading it!
    2016/10/07 13:12:09 1B38D73E h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1225451121;1.20-unstable_svn;11273;-->
    2016/10/07 13:12:09 1B38D73E h (webif) WARNING: Your http disk template /etc/tuxbox/config/CLIENTHEADLINEBIT.tpl is in the old template format without revision info. Please consider upgrading it!
    2016/10/07 13:12:09 1B38D73E h (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3093935193;1.20-unstable_svn;11273;-->




    How would I confirm that it is current?


    I installed the Manual installation fron here I would asume that that would be the latest build.

  • starting up

    Quote from master G

    Is it a white or red card ?
    If white has it been in the official sky HD decoder recently ?


    Hi Master G, Can I ask why you asked that if it was a white card and it had been in the HD decoder recently ?

  • oscam config

    Quote from codar

    Replace the dns part with your server ip address as you don't need a dns if your server is located within the same network as your client receiver (your server's ip shouldn't change within your lan if you've set it a static ip within your router as per tutorial)
    Leaving it as is means your client receiver has to venture outside your network to your dns provider then is redirected back into your network and some routers are flakey when this happens. (some don't support it, it's called nat loopback and may be disabled as default from within your router)
    So change your line on internal receiver to this option (fill in the blanks as required)
    N: 192.168.x.x 10010 test1 ***** 01 02 03 04 05 06.......14
    Replace in red with your server's ip.


    cheers, i've changed it, and twinty minutes with the change and not one disconnect.

  • oscam config

    thanks for the quick reply


    My local line is My.dns.com.


    on my zgemma h.2s in using CCcam 2.3.0


    I'am waiting on my local card being installed next week, i've my Omnikey HID 3121 Card Reader sitting waiting.


    Yes its my friends server and he knows that I'm only testing.

  • oscam config

    thanks, seems to running ok, but user running on box within the same network keeps getting disconnected & reconnects.


    When I was running oscam/cccam I added a second N line in cccam.cfg with the local ip which seemed to fix it, but I've no idea here

  • oscam config

    Hi,


    I've been testing oscam/cccam, now i want to try just oscam, Im looking oscam configs for S**UK 0963. I can only see this for 0960, do I just replace 0690 with 0963 under caid?


    thanks

  • root login

    Hi, I'm having problems login in as root in putty and WinSCP. I did read somewhere that it was to do with the version of ubuntu, and it had a fix, I thought I bookmarked it as I knew I would need it at some point, but I can't find it now and been searching all day for it.


    Up until now I have been able to get by with sudo -i, I've been using this TUT but I'm having problems Updating oscam to latest version and I thing it because I can't log in as root

  • port forwarding

    Is there any difference between the C-line and the N-line, for the end user or security?


    - - - Updated - - -


    I was planning in giving my friends a N-line, is this the best option?

  • port forwarding

    Quote from dejv

    http://myip:port or http://mydyn.com:port


    for the other query it is better to post the config (remove any passwords)


    thanks that work easy enough.



    My Nline works when I have the port open but not when closed.



    My configs


    vat/ect/CCcam.cfg


    SERVER LISTEN PORT : 12754
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :****
    WEBINFO PASSWORD :****
    TELNETINFO USERNAME :****
    TELNETINFO PASSWORD :****
    TELNETINFO LISTEN PORT : 1567
    WEBINFO LISTEN PORT : 1568
    ZAP OSD TIME :0
    OSD USERNAME :****
    OSD PASSWORD :****
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY:
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256



    usr/local/etc/oscam.config


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 1569
    httpuser = ****
    httppwd = ****
    httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254
    httprefresh = 15


    [newcamd]
    port = 10000@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1


    [cccam]
    port = 12754
    reshare = 1
    ignorereshare = 0
    forward_origin_card = 0
    version = 2.2.1
    updateinterval = 60
    minimizecards = 0
    keepconnected = 1
    stealth = 1


    [reader]
    label = cccam
    protocol = cccam
    device = 192.168.0.159,12754
    user = user3
    password = password3
    inactivitytimeout = 30
    caid = 0963
    group = 1
    cccversion = 2.1.1

  • port forwarding

    Quote from cazuela

    Apart from communicating with your peers through server listen port, you shouldn´t have any other EXTERNAL ports open.
    Unless you are transcoding/ streaming or similar..
    Port 80 or 8888 , for example are internal reading so no need to open on the router.
    So which other ports are you forwarding externally?


    Cheers for the info.


    I had the listen port open and also the default port 10000 to use N line, but after I clised the 1000 port the N line stopred working.


    I didn't actually open any other ports, I just didn't know if I should or not besause I couldn't find any info to say eather way.





    - - - Updated - - -


    Quote from dejv

    just the server listen port so that users/peers can connect to your server apart from that nothing. Then if you want to access the web interface from outside your home network or not open the ports of oscam or cccam webinfo


    That interests me. I've opened the ports oscam or cccam webinfo to try this, how to I access this? http://myip,192.168.0.3:port or http://mydyn.com,192.168.0.3:port ??????

  • port forwarding

    I've been following the "Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install" TUT


    I'm at the step before adding my card reader, but I want to make sure every thing is running as it should be at this point.


    I've been trying to find the answers to a few things, but I'm going round in circles, So I've a few questions.


    1st, Do I need to open/port forward all ports I choose in my config files? not just the server listen port?


    thanks.

  • ITV Player

    I've updated my box to WooshBuild v3.01, reinstalled the itv player. now I'm getting to watch a video but the box reboots 30 seconds in. happens on all quality links