Posts by Madhatter

I have the label tab column showing but nothing in it, its blank.

I checked the oscam wiki but it made no mention of a new label entry in user entries?

Sorry mate, should have made myself clear.

In the old version in webif when you clicked the user tab it would show the name of the user but now it just shows connected and IP address

Just updated to 9555 and now when I click on user tab it does not show the name of the user, how can I get this back?

Enabled Label Status
!! Connected

Quote from digidude

as fraggle says, save for a while and get a proper receiver instead of a clone, if you spend your max £90 on a clone that dies after 6 weeks, then you have nothing, save for a few months and get an original receiver

the Alien2 triple tuner receivers are around £160, and these run enigma2 as well as their spark os

No way nearer as good as a proper E2 box. The venton are in the OP range and mucher better box with more support and images out there.

ALieb verses E2 is like shire horse V thoroughbred in a 100m race

Done as you suggested buddy and still no joy.

Strange thing is last 4 days no EMM U/G/S or unknown?

Quote from Mee®kat

For au in your user account it should be named to whatever you have labeled your reader as..however (1) has been known to work but i have always used whichever label name i have used on my reader to update cards.

Madhatter one of your user accounts has a hashed out option (#au = omnikey) unhash that if you use that user for au.

MK

It was working fine up to recent update of binary and than stopped. I didn't make any changes to the configs but will give your suggestion a shot.

Not a techy and can't make sense of the updates on streambaord but has there been an update in this area?

Any one able to help?

What does this mean

2014/01/05 19:06:38 c b***b [***********] EMM: reader_caid 0963 != caid 0960 
2014/01/05 19:06:38 c b***b [***********] EMM: reader_caid 0963 != caid 0961 
2014/01/05 19:06:38 c b***b [***********] EMM: caid 0963 has no provider 
2014/01/05 19:06:38 c ***uk [camd35] EMM: reader_caid 0963 != caid 0960 
2014/01/05 19:06:38 c ***uk [camd35] EMM: reader_caid 0963 != caid 0961 
2014/01/05 19:06:38 c ***uk [camd35] EMM: caid 0963 has no provider

no mate, I deleted it

Since end of Dec, my card is not updating in Oscam, only noticed it after updating the server to 9041.

The client is on 9164

Serv CONF

[global]
logfile                       = /var/log/oscam.log
nice                          = -1
maxlogsize                    = 250
preferlocalcards              = 1
waitforcards                  = 0
saveinithistory               = 1




[monitor]
port                          = 000
aulow                         = 120
hideclient_to                 = 15
monlevel                      = 1
appendchaninfo                = 0




[cccam]
port                          = 59000
reshare                       = 1
ignorereshare                 = 1
forward_origin_card           = 1
version                       = 2.1.4
stealth                       = 1
nodeid                        = 0E227C8F106513E4
reshare_mode                  = 1




[webif]
httpport                      = port
httpuser                      =  
httppwd                       =  
httprefresh                   = 10
httpallowed                   = 127.0.0.1,192.1.0.0-192.1.255.255




[cs357x]
port                          = 999999
serverip                      = 192.1.1.1

Server

[reader]
label                         = omnikey
description                   = World Package
protocol                      = pcsc
device                        = 0
showcls                       = 0
caid                          = 0963
boxid                         = boxkey
#ecmwhitelist                 = 3E,4E,4F,42,44,45,47,53,54,56,61,6A,6B,6D,6E,6F,62,67,68,69,7A,7C,7D,7E,71,72,73,77,78,79,80,89,8B,85,B7
detect                        = cd
mhz                           = 600
cardmhz                       = 600
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
lb_weight                     = 150

Server User

[account]
user                          = UN
pwd                           = PS
group                         = 1
cccmaxhops                    = 5
cccreshare                    = 0
#au                            = omnikey







[account]
user                          = UN
pwd                           = PW
group                         = 1
au                            = 1
cccmaxhops                    = 5
cccreshare                    = 0

Client Server setting

[reader]
label                         = b***b
protocol                      = internal
device                        = /dev/sci0
caid                          = 0963
boxid                         = boxkey
detect                        = cd
mhz                           = 500
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,3,15
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1




[reader]
label                         = ***uk
protocol                      = camd35
device                        = 192.1.1.1,99999
user                          = UN
password                      = PW
group                         = 2
blockemm-g                    = 1




[reader]
label                         = SLy
protocol                      = CCcam
device                        = 192.1.1.1,59000
user                          = US
password                      = PW
inactivitytimeout             = 30
group                         = 3
cccversion                    = 2.1.1
cccwantemu                    = 1
ccckeepalive                  = 1

I installed raspberry wheeze on mine and used this to install OScam

sudo apt-get update

sudo apt-get install subversion cmake build-essential libssl-dev libpcsclite1 libpcsclite-dev dialog

cd ~

(LibUSB)
wget http://sourceforge.net/project….0.9/libusb-1.0.9.tar.bz2

tar xjvf libusb-1.0.9.tar.bz2

cd libusb-1.0.9
./configure
make
sudo make install

cd ~

(OSCAM)
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn

cd oscam-svn
mkdir build
cd build
cmake ..
make
sudo make install

Luckily worked straigt of the bat after FTP my CFG files across

Also found this tut helpful

://tekreaders.com/blog/2012/10/06/raspberry-pi-and-oscam/#step1

Is it possiable to update a card running oscam from a client box running oscam as well?

If yest how do you do it?

How do you update serve running oscam from box running oscam?

OK explains a lot.

Thanks buddy

Its just its not clearing 5HD - its a FTV card, I just thought it might be cause its yellow and not green

Type Caid Provid ID Class Start Date Expire Date Name
tier 0963 000000 0000000000000003 00000000 1970-01-01 2014-01-19 0963:000000 unknown
tier 0963 000000 000000000000000B 00000000 1970-01-01 2014-01-19 0963:000000 unknown
tier 0963 000000 000000000000001D 00000000 1970-01-01 2014-01-19 0963:000000 unknown
tier 0963 000000 000000000000B765 00000000 1970-01-01 2014-01-07 0963:000000 unknown
tier 0963 000000 000000000000B766 00000000 1970-01-01 2014-01-07 0963:000000 unknown
tier 0963 000000 000000000000B772 00000000 1970-01-01 2014-01-07 0963:000000 unknown
tier 0963 000000 000000000000B773 00000000 1970-01-01 2014-01-07 0963:000000 unknown
tier 0963 000000 000000000000B860 00000000 1970-01-01 2014-01-19 0963:000000 unknown

oscaminfo mate and looking in readers

Quote from sync

change MHz to 3150, restart oscam and see if any change

Does this need to be done on all recent builds?

3150MHZ for sly UK - is it sat box or omnikey as well?

Thanks

Hi managed ( I think!!) to set it up and my local card shows as yellow in oscam info - is this right and should it not be green?

Quote from Ten Below

[h=1]OpenATV Softcam Collection & Feed[/h]

Where can you find the cam for ATC open image?

Tried all the CCcam in the first post on BH 2.06 and none install?