Posts by Recai68

Quote from mrlu

-DM800se -SIM2.10 clone & original

-GCC 12.3

-Glibc 2.37

-GStreamer 1.22.6

-Python 2.7.18

-OpenSSL 3.1.3

-Busybox 1.36.1

-Linux kernel 3.2.102

-OSCAM-EMU 11725-798

-Feeds server is working

-Full-HD Teletext

-Front LED blink speed Setup

-ZapMode (black and hold)

-new AudioSelection

-Build date: 2023-10-28

Display More

Hello MR

I installed Openpli 12.3 Build date: 2023-10-28 on DM 800HD SE Sim2.1 colone device. But I have had a green display malfunction before, including:

- during satellite scanning

- install a program (CCCam).

- built-in hard drive is not recognized

Would you find solutions for those errors?

Kind regards

Hello MR

Is there no improvement for the errors of this openli 12.3?

Quote from rick28

Quote from TigTex

Quote from rick28

Quote from Recai68

HDD is not working! a driver instal from HDD give green display

HDD works for recording and playback. But it does not work when installing plugins (green screen). This is true for both the clone and the original. Please correct if possible. I leave the crash log

Thank you

Code

Traceback (most recent call last):

File "/usr/lib/enigma2/python/StartEnigma.py", line 223, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Plugins/Extensions/MediaScanner/plugin.py", line 24, in mountpoint_choosen
File "/usr/lib/enigma2/python/Components/Scanner.py", line 181, in scanDevice
File "/usr/lib/enigma2/python/Components/Harddisk.py", line 662, in getBlockDevInfo
TypeError: argument of type 'NoneType' is not iterable

It seems that your HDD has an unformatted or unrecognized partition. Make sure that your HDD only has 1 primary partition and it's in fat32 / ext2 / ext3

The fact is that this error appears in 3 different DM800se with different HDDs (two clones and one original). It should also be noted that there is no error on PLI 8.3

Display More

is there converted Openpli 8.3 image for colon DM800se sim2.1?

Quote from TigTex

Quote from rick28

Quote from Recai68

HDD is not working! a driver instal from HDD give green display

HDD works for recording and playback. But it does not work when installing plugins (green screen). This is true for both the clone and the original. Please correct if possible. I leave the crash log

Thank you

Code

Traceback (most recent call last):

File "/usr/lib/enigma2/python/StartEnigma.py", line 223, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Plugins/Extensions/MediaScanner/plugin.py", line 24, in mountpoint_choosen
File "/usr/lib/enigma2/python/Components/Scanner.py", line 181, in scanDevice
File "/usr/lib/enigma2/python/Components/Harddisk.py", line 662, in getBlockDevInfo
TypeError: argument of type 'NoneType' is not iterable

It seems that your HDD has an unformatted or unrecognized partition. Make sure that your HDD only has 1 primary partition and it's in fat32 / ext2 / ext3

Rick28 thank you very much

Quote from rick28

Quote from Recai68

HDD is not working! a driver instal from HDD give green display

HDD works for recording and playback. But it does not work when installing plugins (green screen). This is true for both the clone and the original. Please correct if possible. I leave the crash log

Thank you

I installed another image.

HDD is not working! a driver instal from HDD give green display

Teletext not working

Quote from Recai68

Quote from gianni63

Quote from Recai68

how do I install 'INSTALL AS BACKUP'? Would you like to provide information about it?

thanks in advance

first you need to make sure that 'sim has your decoder, then follow this guide

1. Turn off the decoder from the switch on the back, in the absence of the latter, unplug the power cable from your Dreambox.

2. Press and hold the power button on the front panel of your decoder and turn the decoder back on.

3. Always keep the power button on the front panel pressed until *** STOP *** appears on the display together with the IP address of the decoder (eg 192.168.1.33).

4. Open your computer browser and enter the above IP address to access the firmware installation page.

5. At this point click on Firmware upgrade.

6. Send first the ssl (secondstage) then without closing, go back, and select the firmware to install, once selected click on the Flash button! to proceed with the installation of the new firmware. as soon as finished, do not reboot, and go back

Display More

I understand now. Thank you for your good information

Display More

I did exactly what you wrote above. DM800SE remains in stop mode and does not start up !! Do you have a solution to this problem? Thank you

Quote from gianni63

Quote from Recai68

how do I install 'INSTALL AS BACKUP'? Would you like to provide information about it?

thanks in advance

first you need to make sure that 'sim has your decoder, then follow this guide

1. Turn off the decoder from the switch on the back, in the absence of the latter, unplug the power cable from your Dreambox.

2. Press and hold the power button on the front panel of your decoder and turn the decoder back on.

3. Always keep the power button on the front panel pressed until *** STOP *** appears on the display together with the IP address of the decoder (eg 192.168.1.33).

4. Open your computer browser and enter the above IP address to access the firmware installation page.

5. At this point click on Firmware upgrade.

6. Send first the ssl (secondstage) then without closing, go back, and select the firmware to install, once selected click on the Flash button! to proceed with the installation of the new firmware. as soon as finished, do not reboot, and go back

Display More

I understand now. Thank you for your good information

how do I install 'INSTALL AS BACKUP'? Would you like to provide information about it?

thanks in advance

Quote from stefandeda

openpli-10.2-sim2.1-dm800se-2020-11-08

Build based on OpenPLi-Git (develop branch)

-version:10.2 -DM800SE -SIM2.10 - SSL84D

-GCC 10.2.0 -Glibc 2.32 -GStreamer 1.19.0.1

-Python 2.7.18 -OpenSSL 1.1.1g & 1.0.2r

-Busybox 1.32.0 -Linux kernel 3.2.102

-OSCAM-EMU 11669-798

-serviceapp installed -gstplayer installed

-Feeds server is working

-Build date: 2020-11-08

openpli-10.2-sim2.1-dm800se

Display More

can't downloading Something appears to be missing…