I also would like to know the answer to this.
Posts by daaceizbak
-
-
I will let you know once I hear back from my mate.
- - - Updated - - -
Update: taking off the IP line in newcamd fixed the problem. Thank you.
How do I setup my config to make my friend use local cache rather than local card?
-
i forgot to mention, if i use his box within my network at home, it works perfectly. how odd!
-
-
I gave them:
The port opened on my router is 17001, protocol is BOTH, TCP and UDP. could this be the case?
Or maybe its this:
should i change to:
-
Right i have amended the crontab, i have just put a # for each line.
-
Hi
I have just given a n line to my friend to access my local card. however it is showing the following message:
PHP2015/02/22 14:19:38 1404AE0 c client connected to xxxxx port 2015/02/22 14:19:38 1404AE0 c plain newcamd-client xxxxxxxxx rejected (invalid access) 2015/02/22 14:19:38 1404AE0 c anonymous disconnected from xxxxxxxx
My configs are:
oscam.conf
PHP
Display More[global] logfile = std nice = -10 maxlogsize = 500 preferlocalcards = 1 emmlogdir = /var/local/ [cache] [newcamd] port = 17001@0963:000000 allowed = 127.0.0.1,192.168.0.0-255.255.255.255 key = 0102030405060708091011121314 keepalive = 1 [cccam] port = 30001 version = 2.1.3 reshare = 1 updateinterval = 120 [webif] httpport = 15001 httpuser = admin httppwd = blahblah httprefresh = 10 httpallowed = 127.0.0.1,1.1.1.1-255.255.255.255
oscam.user
PHP
Display More[account] user = user1 pwd = user11 caid = 0963 Keepalive = 1 au = slyuk group = 1 ident = 0963:000000 [account] user = local1 pwd = local2 caid = 0963 keepalive = 1 au = slyuk group = 1 ident = 0963:000000
oscam.server
-
Hi
Every morning at 06:57, my card card server stops and doesn't work until I manually have to reboot server. Any idea? See log:
Code2015/02/22 06:56:54 C0B390 c user123 (0960&000000/FFFF/1581/63:29C287F76AE75B6711352C3708902B09): found (94 ms) by slyuk - 2015/02/22 06:57:02 C80008C0 h HTTP Server stopped 2015/02/22 06:57:02 0 s killing client user123 2015/02/22 06:57:02 0 s slyuk [***********] Killing reader 2015/02/22 06:57:02 0 s userdb 3 accounts freed 2015/02/22 06:57:02 0 s readerdb 1 readers freed 2015/02/22 06:57:02 0 s cardserver down
-
Admin: Please delete this thread. It is no longer required. Thanks
-
ok, maybe you should leave boxid parameter for now, and wait for more details from master G
if i understand it right, there is oscam AND cccam installed on your server.
but you said that your cccam.cfg is empty, so i guess you can remove all cccam part from your server...card seems ok if you have in status CARD OK (x entitlements)
try to post a full log of oscam (with some debug activated : on oscam webif, menu FILES > logfile > Switch debug from 0 to 4 and/or 16)
zap on 2 or 3 channels you should have, and post the result hereyou mean there is a 2nd card on your ubuntu server ? configured in oscam.reader or not ?
There is no second card in my server, the other one is in my *** box.
I will try what you have suggested and let you know, thanks
- - - Updated - - -
UPDATE:
I swapped my multi *** card with the main one in the box and it finally works. For some reason it didn't recognise the *** multi room card.
I put the multi card into my *** Reciever and that's works.
My question is whether if I should stick to this solution and it's safe to do so?
-
White thomson hd box ? no such thing you must mean a *** + box that is a thomson either that or were not talking about a 0963 card what the thread seems to be about ??
Yes it's a Thompson *** plus box, not HD. Thanks
- - - Updated - - -
11 entitlements is basically a free-view card.. Remove the boxid = 12345678 parameter from oscam.server, it`s not needed, then restart oscam.
Do you have more entitlements now ?
Has this card been paired to an official SD receiver or one of the latest HD models ?
I have removed boxid and now shows the following log:
PHP
Display More[code=php][QUOTE] 2014/12/07 12:01:40 BD9CE0 r ***uk [pcsc] classD0 ins36: encrypted - can't parse 2014/12/07 12:01:40 BD9CE0 r ***uk [pcsc] no boxID available 2014/12/07 12:01:40 BD9CE0 r ***uk [pcsc] card system not supported 2014/12/07 12:01:40 BD9CE0 r ***uk [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 2014/12/07 12:01:40 BD9CE0 r ***uk [pcsc] card initializing error 2014/12/07 12:01:41 0 s init for all local cards done 2014/12/07 12:01:41 0 s anti cascading disabled 2014/12/07 12:01:42 C09250 c encrypted cccam-client 192.168.1.1 granted (test1, au=on (1 reader)) 2014/12/07 12:01:43 C09250 c test1 (0963&000000/FFFF/125F/63:924562594160E2096C948C628C886101): rejected group (0 ms) - *** One (no matching reader) 2014/12/07 12:01:51 C09250 c test1 (0963&000000/FFFF/125F/63:BDA49B6F55A70228DE7A9BEA8E84F032): rejected group (0 ms) - *** One (no matching reader) [/QUOTE]
[/code]
- - - Updated - - -
Yes you might have followed the tutorial. I have attached a zip file to my last post. The oscam.conf file/ user/ reader is all setup the only thing you have to do is add a username/ password to the oscam user file. I have only installed this today and updated it and it is working 100%.
would i need to install the dns updater, and everything else again? ideally this would be my last option :)
- - - Updated - - -
I would also like to had I am using a *** multi room card, maybe that's why it's showing as freeview caid 0960?
-
11 entitlements is basically a free-view card.. Remove the boxid = 12345678 parameter from oscam.server, it`s not needed, then restart oscam.
Do you have more entitlements now ?
Has this card been paired to an official SD receiver or one of the latest HD models ?
It was initially paired with new HD Reciever but then I repaired it to the White thompson hd box I already had. Could that be an issue?
-
here is a working oscam you can try
1 On the left hand side, Browse to the "CCcam Oscam Ubuntu 64-Bit" Folder
On the right, browse to <root>/tmp folder2 Select both "cccamoscam_install_package" Folder & CCcamOscamInstall.sh and copy them to tpm folder
3 chmod the Script with this command
Code:chmod 755 /tmp/CCcamOscamInstall.sh
4 Run the Script with this command
Code:
/tmp/CCcamOscamInstall.sh
http://linuxsat-support.com/showthread.php?t=16479Hi this is the tutorial I followed. So it's no point repeating it?
-
hi,
please, use *code* tags when you post log from oscam, it will be better to read...
i see this :
but you set your reader and user with caid 0963 ?
I have put 0963 in my configs, I'm not sure why it always says 0960. It's always show 11 "0960" entitlements.
- - - Updated - - -
11 entitlements is basically a free-view card.. Remove the boxid = 12345678 parameter from oscam.server, it`s not needed, then restart oscam.
Do you have more entitlements now ?
Hi, I will let you know in the morning. Thanks for replying
-
Hi all,
i am getting "no data" on my reader under LB value/reader, as below. I am new and have just started out, so i have never been able to succeed yet. i am running out of options. your help is much appreciated, thanks!
slyuk ON 127.0.0.1 0 pcsc 0000:0000 no data 00:11:25 00:11:25 CARDOK (11 entitlements)
This is my current setup:
OSCAM: 1.20-unstable_svn Build: r9952
Ubuntu PC server 12.04
omnikeyoscam.dvbapi & CCcam.cfg are empty, as i dont think it gets used as i want the OScam only setup, where CCCam clients can connect to my pc server..correct me otherwise
Config files as follows:
oscam.conf
Code
Display More[global] logfile = /var/local/oscam.log cachedelay = 120 nice = -10 maxlogsize = 500 preferlocalcards = 1 emmlogdir = /var/local/ lb_mode = 0 lb_save = 100 lb_reopen_seconds = 21600 lb_savepath = /var/local/loadbalance.log [cccam] port = 12000 version = 2.1.3 reshare = 1 updateinterval = 120 [webif] httpport = xxxxx httpuser = admin httppwd = xxxxxxxxx httprefresh = 10 httpallowed = 127.0.0.1,1.1.1.1-255.255.255.255 httpdyndns = xxxxxxxxxx.xxxxx.xxx
oscam.user
Code[account] user = test1 pwd = test2 group = 1 monlevel = 0 au = ***uk caid = 0963 ident = 0963:000000 keepalive = 1
oscam.serverCode
Display More[reader] label = ***uk protocol = pcsc device = 0 caid = 0963 ident = 0963:000000 group = 1 emmcache = 1,3,2 mhz = 357 cardmhz = 357 boxid = 12345678 detect = cd blockemm-unknown = 1 blockemm-g = 1 saveemm-u = 1 saveemm-s = 1 lb_weight = 300
I also add the log details below:Code
Display More[LIST] [*]2014/12/06 19:11:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9952 (x86_64-linux-gnu-libusb-pcsc) [*]2014/12/06 19:11:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5729 [*]2014/12/06 19:11:29 0 s services reloaded: 0 services freed, 25 services loaded, rejected 0 [*]2014/12/06 19:11:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled [*]2014/12/06 19:11:29 0 s signal handling initialized [*]2014/12/06 19:11:29 0 s 887 service-id's loaded in 3 ms [*]2014/12/06 19:11:29 0 s cccam: initialized (fd=5, port=12000) [*]2014/12/06 19:11:29 0 s ***uk [pcsc] creating thread for device 0 [*]2014/12/06 19:11:29 0 s loadbalancer: can't read from file /var/local/loadbalance.log [*]2014/12/06 19:11:29 0 s waiting for local card init [*]2014/12/06 19:11:29 D27BC0 r ***uk [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357) [*]2014/12/06 19:11:29 C4002030 h webif: decompressed 154913 bytes back into 365880 bytes [*]2014/12/06 19:11:29 C4002030 h HTTP Server running. ip=0.0.0.0 port=xxxxx [*]2014/12/06 19:11:30 D27BC0 r ***uk [pcsc] PCSC was opened with handle: 1779958029 [*]2014/12/06 19:11:30 D27BC0 r ***uk [pcsc] card detected [*]2014/12/06 19:11:30 D27BC0 r ***uk [pcsc] ATR: [anonimised] [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] Card type: SYAV [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] Rom version: 50LN [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] Credit available on card: 28 euro [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] FuseByte: 25 [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] Region Code: xxx [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] Country Code: GBR [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] Pincode read: xxxx [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] PCB settings: 3F 0 E 0 [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] type: ********** Unknown Card, caid: 0960 [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] serial: ########, BoxID: ########, baseyear: 1997 [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] ready for requests [*]2014/12/06 19:11:31 D27BC0 r ***uk [pcsc] found card system *********** [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] card detected [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] type: ********** Unknown Card [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: 0003, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: 000b, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: 001d, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b765, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b766, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b772, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b773, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b846, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b860, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b8cc, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:31 D27BC0 r ***uk [***********] tier: b8cf, expiry date: 2015/01/27-00:00:00 [*]2014/12/06 19:11:35 0 s init for all local cards done [*]2014/12/06 19:11:35 0 s anti cascading disabled 2014/12/06 19:42:09 D581A0 c encrypted cccam-client 192.168.1.1 granted (test1, au=on (1 reader)) 2014/12/06 19:42:13 D581A0 c test1 (0963&000000/FFFF/1581/63:D51AD164D8FC55893F017D05D18AD4D6): rejected group (0 ms) - *** Sports 2 (no matching reader) 2014/12/06 19:42:37 D581A0 c test1 (0963&000000/FFFF/125F/63:783C776867442E5DA8EE05C691AA3FDF): rejected group (0 ms) - *** One (no matching reader) 2014/12/06 19:42:42 D581A0 c test1 (0963&000000/FFFF/125F/63:0130E3E5B4793AF9C2C3B545513E8FA4): rejected group (0 ms) - *** One (no matching reader) 2014/12/06 19:42:47 D581A0 c test1 (0963&000000/FFFF/125F/63:2BCD8C8F5726DA0B440C272A72FE7163): rejected group (0 ms) - *** One (no matching reader) 2014/12/06 19:42:53 D581A0 c test1 (0963&000000/FFFF/125F/63:D9975F9949BAECA2B5A47A48864F967A): rejected group (0 ms) - *** One (no matching reader) 2014/12/06 19:43:02 D581A0 c test1 (0963&000000/FFFF/1290/63:98801E1E3097E447E8855FE39FA15EDC): rejected group (1 ms) - *** Two (no matching reader) 2014/12/06 19:43:09 D581A0 c test1 (0963&000000/FFFF/1290/63:FC05EFA51D6264E536383A8D08FCA819): rejected group (0 ms) - *** Two (no matching reader) 2014/12/06 19:43:17 D581A0 c test1 (0963&000000/FFFF/1290/63:5BDF9F966881E4DFA6BCD7AC45025CB8): rejected group (0 ms) - *** Two (no matching reader)
-
Hi solo
Did you ever get this sorted out?
I have the same issue and I have spent hours trying to fix it
-
That's great., as long as it doesn't lose server performance .
Another question, has anyone currently rented one of those dedicated servers located in Europe etc for caches or other purposes? If so, what do I need to install on this server? My overall goal is for my friends and family to connect to the server rather then my local one.
Thanks
-
Hi
I have one omnikey reader connected to my Ubuntu server, is it possible to add more readers? What is the limit? Which files will need configuring in oscam?
Thanks
-
Hello
This question is more for the experienced users:
Is it best to use cache ex with CSP or to use cache ex by itself?
I am a novice and would like reasons why it is better or not.....
Thanks in advance
-
Open the script with a editor, and install it manual, from line 149 (apt-get update).......(copy - paste commands from script to terminal}
Everthing before this line have been installed when you ran the script
I had exactly the same problemThanks, that did it.