As per title anyone got a channel list for the V8UHD ?
Not found an editor for this channel dump.
Thanks
Lee
As per title anyone got a channel list for the V8UHD ?
Not found an editor for this channel dump.
Thanks
Lee
Thanks AB - Confirmed my understanding.
Hi
is there any way I can use my miracle box with a sky LNB ?
is it possible to amend settings in tuner settings, or its an LNB replacement ?
Thanks
Lee
thanks mate, can you remind the best plug in for epg ?
hi guys
not used my cable box for a year and just installed open atv again, but i cant get a autobouets maker to install from a ipk ?
any help would be great
How do I do that as I bought the box already set up etc
Thanks jonny
you may be better putting this on your box if unable to update your box via software manager, but you will need to back up your line first. -- http://www.wooshbuild.co.uk/downloads.php its very easy to install and guide you on setup.
Hi there I’m totally new at all this I have a zgemma h2h box on virgin and I’ve got narrator on movie channels etc and some other audio issues with other channels is there an idiot guide to fix this as I’ve looked through the forums and it’s like reading a different language lol
you will to need to flash it with a new image.
Hi guys
could someone tell how to enable the freq and symbol view in the 2nd info bar? i have enabled the 2nd info bar and tried the two options ecm and info but none of these displays the freq and symbol on my sat feed.
Thanks
Lee `
Can anyone help with this please?
thanks, will try mate.
can someone please look at my mg_cfg below as unable to get Cccam file to work in MGCAMD or Cccamd.
In the newcam file i have amended line with CWS =
My mcamd share works fine but unable to get my euro share to work which was working fine in VIX.
##########################
###LINUXSAT-SUPPORT.COM###
##########################
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Thanks
Did you restart the cam in the softcam panel?
yes mate
You have used a question mark at the end of your sentence. Only you can answer that question.
Filename is CCcam.cfg Have you got it correct? Particularly with regards to spelling and file extension.
Which receiver is this on?
yes file name is correct and its an miracle mini hd
OpenATV uses /usr/keys for cam config files
Tried ftp ing the Ccam.cfg there and restart cam but no joy?
Hi guys
try to get ccam to run on openatv 6.1 installed 2.3.0 but no joy, does the CCcam.cfg still go in etc ?
sorted thanks, was overthinking it
do you run crosspeg once install, as i don't see a option run via epg importer r? ( i have selected the vm provider in epg importer.
in the EPG settings in the main menu did you enable the cable EPG as it is set to Off by default
i don't see that option in EPG setting in main menu on latest version dated 22.11.2017? i have the VM provider set in ABM and that worked fine
hi guys
changed my image from vix to openatv and works fine apart from EPG? In vix i left it on movie previews to pull in EPG, but this does not work on atv? have tried installing crosspeg but not seeing the cable provider ?
thanks
lee
http://images.mynonpublic.com/…ent/index.php?open=mbmini
not sure if thats the one but dated 19th you want
thanks mate your a star
i can't see any new image for this box? currently running VIX but don't mind trying a new image if it sorts problem