will this work on miracle box mini combo hd?
Posts by warhead1999
-
-
i have miracle premiun mini great box and better, and faster than my vu solo.
-
Hi
As per title does anyone have *** sports 5 picon ?
Thanks
-
just try re-flashing it again.
-
change your LNB to twin or greater.
-
INVERTO BLACK have a very good name in LNBS
-
get one from site sponsor, great price at 150.00 plus discount for forum members..
Great little box !
-
mini wot ?
-
install vix appollo and use the ABM uk cable, works great and takes seconds to search.
-
Think ill put openpli back on it, love vix but it looks like this image is not fit for purpose if i have to load new image each time i wish to rescan.
Will put Vix back on once cable side is fixed
-
Just loaded ViX Apollo mate, tuner fine at setup but as soon as i load channel list via dbedit i lose the option to service scan type - provider
-
Hi All
OK have a issue with Helios vix, when i setup with new image i set the tuners up as one being a sat tuner and tuner b as a cable tuner on my miracle box.
On the cable tuner it allows me to set it as used service scan type - provider but once i upload a saved channel list from dbedit i only have frequency bands or frequency steps, this is stopping me doing manual scans at a later date.got me puzzled?
-
The CCcam server needs to be running version 2.0.11 or below to use C line/cccamd.list, do you know if the server is running this version ?
Why would you expect to see anything active in CCcaminfo when you are using mgcamd ?
ah ok will have to check with server, how do you check lines are live in mgcamd apart from channels clear?
-
I'm not familiar with your reviewer m8? To help much more !!
Are attributes to cccamd.list & mg_cfg.list set at 644how do i do that mate?
-
mgcamd 1.35
-
Change G: to { 33 } then restart mgcamd
done that mate but still not clearing and getting error reading webpage when trying is see if line is active?
-
hi guys
Trying to use mgcamd for the first time and have installed 1.35 from feeds running vix Helios 17 on my Miraclebox-Mini.
Have copied my C : to cccamd.list and rebooted box and started cam in via blue button and enabled restart.
Unable to clear channels and cant see active lines via blue button - CCcam info.
This is my mg_cfg data, any help would be great
Code
Display More########################## ###LINUXSAT-SUPPORT.COM### ########################## # EMM messages # 00 don't show any EMMs (default) # 01 show only valid EMMs # 02 show valid and bad EMMs with complete data display M: { 01 } # ECM messages # 00 don't show anything about ecm # 01 normal mode, show pids processed, decoded ecm and cw # 02 verbose mode, show valid and bad ECMs with data C: { 02 } # AU # 00 disable, no emm pids processed # 01 enable, emm pids always processed for soft-au and shared cards # 02 auto, emm started only if channel cant be decoded # 03 process emm pids for network cards update only A: { 01 } # key update (sum 01 or 02 with 04) # 01 update only new keys, default setting # 02 update all keys (used for valid PMK checking) # 04 enable TPS au # + tps SID, which pmt pid contains au pid U: { 01 } 0x12c0 # config files folder (softcam, autoroll, ignore/priority) # 00 files in /var/keys # 01 files in /tmp T: { 00 } # network mode, use summ for several clients # 00 no network (default) # 01 newcamd netclient # 02 radegast netclient # 04 camd3 netclient # 08 gbox netclient # 32 cccamd netclient, card list saved as /tmp/cccamd.info # (ECM only, supported server version up to 2.1.1, later not work) G: { 01 } # network retry, use summ for several options # 00 disable # 01 retry every new ecm # 02 try to connect to offline shares every Q: seconds # 04 try to detect and fast reconnect to lost (and not used atm) server # + XX messages number and YY seconds to reconnect # mg will reconnect to server, if no answer to last XX ecm/keepalive or # if no answer for last ecm or keepalive sent for YY seconds # set to 0 to disable N: { 07 } 5 30 # network ecm timeout in seconds K: { 05 } # newcamd dead routes connect retry, sec Q: { 600 } # network shares priority # 00 gbox, newcamd, cccamd, radegast, camd3 (default) # 01 camd3, radegast, cccamd, gbox, newcamd # 02 cccamd, newcamd, camd3, gbox, radegast P: { 00 } # on screen display type # 00 No OSD (default) # 01 neutrino # 02 enigma # 03 relook # + user password for http auth O: { 00 } username password # on screen display Options, summ of: # 01 show emu ecm # 02 show network shares messages # 04 show decoding failed / fta # 08 show emm keys update # + web port to use for osd S: { 03 } 80 # Log option, summ of: # 00 off # 01 network udp log # 02 log to console # 04 file, appended ! delete it by yourself, before it eat all your hdd # + IP udp-port log-file-name L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log # keep ecm cache, seconds # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory, # for openbox/elanvision users with remote shares make sense to set it higher than default value, # to not hammer cards while timeshifting or playing crypted recordings. E: { 15 } # cache option, summ of: # 00 Off (default) # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list # 02 Ecm data cache, remember CW for (E:) time # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart H: { 07 } # reread files, summ of: # 00 No (default) # 01 reread config file on channel change (including priority and ignore, but not replace/cache) # 02 reread SoftCam.Key on channel change # 04 reread SoftCam.Key if file changed R: { 04 } # debug, summ of # 00 off (default) # 01 debug ecm # 02 debug emm # 04 debug network ecm # 08 debug network emm # 16 debug network login # 32 show mem/cpu stats every 1 min # 64 add timestamp to log messages D: { 00 } # box type # 00 autodetect, change only if you think wrong type detected. # 01 dbox2 # 02 dreambox # 03 triple-dragon # 04 relook # 05 openbox # 06 dreambox/mips # 08 stapi/kathrein # 09 stapi/ipbox # 11 stapi/openbox B: { 06 } # map all 180x nagra caids to 1801 # default is 01 F: { 00
-
Great to be back, i even had to start talking to the misses.
-
i would load cats-eye channel list and edit your channels in dream box edit, and edit your entertainment favorites to include your local channels.
I then just scan my cable channels and also edit them in dream box edit
-
what a rip off