Hi guys
have been reading and trying a number things discussed on forum over the last couple days with no joy.
Have tried updating ABM to 2.8/2.9 deleting all ABM and running ABM, Also tried installing oscam latest, tried the script fix, plus updating video and PIDs in E-Channelizer.
Had some success with the E-Channelizer in removing NAR on some channels, but no joy bring back sound on Sky Sports Main Event and other with no sound,
Any help or advice would be great.
Ta
Hi Guys
Anyone got a spare Miraclebox Replacement Remote Control?
Thanks
Thanks Guys
Hi guys
does anyone know what the green flashing arrow point down is for on the latest openvix image, not updated my box for along time, and this is new to me ?
Thanks
just shows they dont know shit at Maplins
Thanks for advise guys, popped out and got a 8g sandisk memory stick, loaded the image posted by robijay above, rebooted box but same issue box booted fully, ahh.
So checked if USB was pushed in ok but your view is obstructed by network plug, so removed and checked USB but looked fine, thought i would reboot box without putting network plug back in and , Yep you guessed it, it work?
Very odd, but guessing network cable was pushing the USB off center a little but it did mount fine when used old one for EPG and picons.
yes tried putting boot loader on but same issue with USB, & i understand the boot loader for these boxes is part of the image
yep tried the vix4project image but same issue
i did mate but not getting the USB coming up on lcd screen?
Hi Guys
Bought a Zgemma H1 for the bedroom, and the image is over a year old, so i thought i would flash it with the latest OpenATV image.
Put the image on a USB ( Zgemma folder ) i use for updating the boxes i have had of the last 3 years, and last used on my Miracle mini combo box, put the USB in back slot and powered on, waited for USB to come up on front screen, but booted up fully.
Tried above couple times so i thought i would try updating boot loader & followed same boot sequence above, but still no joy?
Are these boxes fussy with which USB you use ?
PS was using this USB mounted on same box for EPG but formatted it before upgrade.
Check the permissions on mgcamd_138c is 755.
that got it thanks mate
hmm ok still cant get this to work and i thought i had a backup on drop box of 1.38d
installed but not clearing channels, do i need an amended - mg_cfg
Hi guys running VIX Apollo build 001 & running mgcamd 1.38d on my Miracle box mini HD, the problem i am having is for both my sky and cable shares its taking ages ( 2mins + ) to clear at the first point of going from FTA to a channel requires the softcam to kick in.
Once the cam has started, its fine if i move from channel to channel,
Please see my mg_cfg below
##########################
###LINUXSAT-SUPPORT.COM###
##########################
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }any one had issues with the vix one stopping even with startup enabled ?
hi guys
just done a fresh flash install and gone to XMLTV to select cable epg and i only have 3 providers listed?
What am i doing wrong?
- - - Updated - - -
sorted via here - http://linuxsat-support.com/showthread.php?t=77304
ta
it cant see the tuner once i loaded channel list, but tuner is fine.
- - - Updated - - -
Did you add the custom satellites.xml then restart enigma2 ? Try the attached catseye..
do i need to create custom.xml before installing ipks ?
hi mate, i have done a fresh flash of box and tried loading the latest catseye list and its still grayed out, without setup AutoBouquetsMaker ?
thanks reply.
Hi guys
ok i have had enigma 2 boxes for many years and flashed many boxes with firmware and channel lists over the years but never had this issue. Ok so i download the full cateye new channel list and uploaded it to my miracle mini hd that has a sat and cable tuner, used dreambox edit uploaded channel list fine and i also restarted box, but when it reboots the sky channels are grayed out and and it gives tuner error, and if i go to tuner settings it cant see tuner?
So i thought it my be the feed so i reflashed the box with my vix Apollo image and set box up with auto bouquets and scanned sky UK and it found channels with no grey channels or tuner issues, done same for cable channels and all is good, so just confirm my setting where correct for my motorized dish i done a sat finder and all sat are strong and dish is moving fine.
so thought OK lets try the multi satellite list again, and bang its grayed out channels again on sky, with no tuner found in system searching.
also tried old channel list i have loaded in the past and tried dreamset with the same results
HELP !
- - - Updated - - -
Also noticed that channel numbers are screwd, ie channel 1 in dreambox edit is 858 when uploaded?
is there a cable & sat combo, and how do you update channel list and EPG ?
