Posts by fulgas

  • Please Need Automated Installation Script for CCcam 2.1.3 server on Ubuntu

    Thank you MRGMX,


    I have the ubuntu 10.04 LTS well installed and running ok with a static network config. Even have a gnome on and currently using Firefox now
    I can go Oscam reading the S** white card and CCcam to share..as I have my SAB receivers using Oscam, and DM500S and Openbox S10 using CCcam



    I am first concerned about internal CS (3 bedrooms + sitting room) and I will have other 4 friends to give some Clines. So I just set my DM500s as a server with the following:


    1 - Nabilo image
    2 - CCcam 2.1.3 installed and running ok
    4 - my S** boxkey
    3 - the changes below in CCcam.cfg but the DM 500 does not read/show the subscribed channels


    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :root
    WEBINFO PASSWORD : linuxsat
    TELNETINFO USERNAME :root
    TELNETINFO PASSWORD : linuxsat
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD : linuxsat
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    #MINIMUM DOWNHOPS: 1
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    BOXKEY: /dev/sci0 XX XX XX XX
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 0000000




    I don't know where I went wrong.


    Please help


    Thanks in advance

  • Please Need Automated Installation Script for CCcam 2.1.3 server on Ubuntu

    Sorry MRGMX


    I went through the link for the CCcam only before and noticed that TenBelow's post states CCcam 2.1.3 but in fact the unzipped files show CCcam 2.1.4...Would this be fine with files for CCcam 2.1.3? I can notice that most people prefer CCcam 2.1.3 as It shows local


    Cheers,


    [quote='mrgmx','https://linuxsat-support.com/index.php?thread/&postID=53590#post53590']Hi Mate,


    If you just want Cccam


    http://linuxsat-support.com/li…-ubuntu-cccam-server.html

  • Confused ...Please help with my Static Network Configuration on Ubuntu Server

    Hi All,


    In my Router Linksys WRP 400, the DNS setting has no option for no-ip.com but only DynDNS.org or TZM.com


    If I select dyndns.org and add in the relevant fields my
    1 - no-ip.com Username
    2 - no-ip.com Passwd
    3 - no-ip.com hostname fulgas.ilovecollege.info


    Will this work? or I must go dyndns.org


    thank you


  • Could too many traffics cause Freezing to Ubuntu Pc Server???

    Hi Guys,



    I am using a 25Mb Fibre Power Broadband through my Linksys WRP 400 router.


    This router has 4 ethernet ports and 2 phones ports.


    It powers all my TVs (4), VOIP phones (2 lines), 1 desktop , and 2 wireless laptops in the house


    At least 2 TVs, all the phones, and the desktop are running at the same time.




    ******My question is: Will there be any freezing issues if I use the desktop as a server for CS?



    Thanks in advance

  • Openbox S10 going dead after scanning more than 4 satellites

    Hi All,


    Need to know whether anyone is having the same problem.



    My S10 just went dead few weeks ago. The on/off light was coming up at all. I thought that was something to do with the plug or the power support in the box. I moved it from 1 room to the other within my house, even tried all the sockets in vain. Then I tried few friends places with no success. I then returned to the retailer shop in UK (as box still under the warranty).


    I just received an email from the retailer saying :


    ""I test it for more than 24 hrs.
    I found that more than 12 satellites downloaded in it , the receiver memory is limited . i suggest you not download more than 3/4 satellites.
    I did a factory reset and changed the firmware.
    I scanned a single satellite 28.2e and it is working Ok.
    Now your box is ready for collection."""



    My questions are:


    1 - Is this normal?
    2 - What happened to those who have a motorized sat system and can scan multiple sat lists?



    I planned to to buy a Orthon X403p from the same shop and I need some advise as they are encouraging me to get REDLINE receiver instead


    Please help



    Thank you

  • Confused ...Please help with my Static Network Configuration on Ubuntu Server

    Thank you Sandman


    I just got a DNS account on No-ip.com as follows: fulgas.*******.******
    At work at the moment. I will try it as per your instruction and keep all posted tonight



    Cheers


  • Confused ...Please help with my Static Network Configuration on Ubuntu Server

    Hi All,


    Let's say


    1 - My host Ip address (retrieved from myipaddress.com) is 109.255.XXX.XXX
    2 - My router ip (Linksys WRP 400) is 192.168.15.1
    3 - DHCP setting in my ubuntu server as follows; i


    """This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).


    # The loopback network interface
    auto lo
    iface lo inet loopback


    # The primary network interface
    auto eth0
    iface eth0 inet dhcp"""



    Now to change I need to change to STATIC Configuration, I made the following setting:


    # This file describes the network interfaces available on your system
    and how to activate them. For more information, see interfaces(5).
    # The loopback network interface
    auto lo
    iface lo inet loopback


    # The primary network interface
    auto eth0
    iface eth0 inet static
    address 109.255.XXX.XXX
    netmask 255.255.255.0
    broadcast 192.168.15.102
    gateway 192.168.15.1


    I then restart the server using this command nano /etc/network/interfaces


    The server does not go online....


    Where am I going wrong?


    Thank in advance

  • No-ip.com: No more worries about hostnames expiring or confirming your account

    Hi Guys,



    I just got mine for $7.47 using my coupon number


    Check this link below



    https://www.no-ip.com/members/…d_upgrade.php?P=ENABDCT50



    Enter Coupon Code: xxxxxxxxx at checkout to SAVE 50%!

    5 Reasons to Upgrade to Enhanced DNS
    1. No more worries about hostnames expiring or confirming your account every
    30 days.
    2. More hosts! Enjoy up to 25 hosts
    3. More domain choices
    4. Phone Support
    5. No advertising on URL redirects/port 80 redirects

  • Need Help Setting up CCCam + Oscam on Ubuntu server 10.04

    [quote='musogeek','https://linuxsat-support.com/index.php?thread/&postID=45825#post45825']for question 1 - you need to change it to static


    I have been trying to change the DHCP to static network. Every time I finish I loose the internet connection. I don't know where I am going wrong. In fact I have been taking the following steps:


    I enter command code: sudo nano /etc/network/interfaces


    and then change DHCP to STATIC, then add:


    address : 109.xxx.xxx.xxx (this my PC ip address)
    netmask : 255.255.255.0 (Subnet mask address)
    gateway : 192.xxx.xx.x (my Router ip address)


    then I reboot the server. After rebooting, the server goes and remains off line...


    I have a lynksis router WRP 400...Do I have to amend any setting to get the server connected?


    Since I am only want to share within the house and with couple of friends...Can I use my own PC IP address (or Router ip address) as the hostname?


    Please need help?


    Cheers

  • Need Help Setting up CCCam + Oscam on Ubuntu server 10.04

    Thank you Master G


    I just followed your instructions and installed "Nabilo CCcam info plugins V 1.0 (Autoinstall package). I also got into the Cams, and installed CCcam 2.1.3 complete....


    All working fine now but CCcam 2.2.1 is still showing in Menu....Is that normal?



    Thank you so much


    Quote from master G

    Download CCcam 2.1.3 from the Dedicated Addons Server on the image.