Posts by Iame

Thanks for your help. I am quite new to this and appreciate if you can be more specific Do you mean CCcam or do i need something else ?

I have 2 instances of oscam running sidexside on one computer with one card(usb omnikey). I have readers (oscam.server) in both instances but only one reads card at any one time. Is it possible to tweak some setting to get both to read card at same time ?

I did a new install and it worked first time......My fault sorry for hasle but thanks for help

Its stil giving same errors. I have disconnected the omnikey reader and tried also and I reboot after each try. I also tried Synaptic packet manager without sucess but it is reporting it as a 'broken package'. can i safely delete the files associated and reinstall. But i would need info on the specific files or directories. Or do the get out quick approach and reinstall Debian. done it so many times now my comp is even getting it done almost automatically

I'm using Debian GNU/Linux 6.0 \n \l with automatic update on
I have followed your instructions and very grateful for help and I get this:

root@?????:~# apt-get remove opensc pcscd libccid
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libopenct1 libopensc2 hal hal-info
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
libccid opensc pcscd
0 upgraded, 0 newly installed, 3 to remove and 2 not upgraded.
2 not fully installed or removed.
After this operation, 1,270 kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 127005 files and directories currently installed.)
Removing pcscd ...
/etc/init.d/pcscd: 150: Syntax error: Unterminated quoted string
invoke-rc.d: initscript pcscd, action "stop" failed.
dpkg: error processing pcscd (--remove):
subprocess installed pre-rem***l script returned error exit status 2
configured to not write apport reports
insserv: warning: script 'noip2' missing LSB tags and overrides
/etc/init.d/pcscd: 150: Syntax error: Unterminated quoted string
invoke-rc.d: initscript pcscd, action "start" failed.
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 2
Removing libccid ...
/etc/init.d/pcscd: 150: Syntax error: Unterminated quoted string
invoke-rc.d: initscript pcscd, action "restart" failed.
dpkg: error processing libccid (--remove):
subprocess installed post-rem***l script returned error exit status 2
configured to not write apport reports
Removing opensc ...
Processing triggers for man-db ...
Errors were encountered while processing:
pcscd
libccid
E: Sub-process /usr/bin/dpkg returned an error code (1)

reboot and then

# apt-get install opensc pcscd libccid
Reading package lists... Done
Building dependency tree
Reading state information... Done
libccid is already the newest version.
pcscd is already the newest version.
The following NEW packages will be installed:
opensc
0 upgraded, 1 newly installed, 0 to remove and 2 not upgraded.
2 not fully installed or removed.
Need to get 0 B/423 kB of archives.
After this operation, 680 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Selecting previously deselected package libccid.
(Reading database ... 126956 files and directories currently installed.)
Preparing to replace libccid 1.3.11-2 (using .../libccid_1.3.11-2_i386.deb) ...
Unpacking replacement libccid ...
Selecting previously deselected package opensc.
Unpacking opensc (from .../opensc_0.11.13-1.1_i386.deb) ...
Processing triggers for man-db ...
Setting up libccid (1.3.11-2) ...
/etc/init.d/pcscd: 150: Syntax error: Unterminated quoted string
invoke-rc.d: initscript pcscd, action "restart" failed.
dpkg: error processing libccid (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
dpkg: dependency problems prevent configuration of pcscd:
pcscd depends on libccid | pcsc-ifd-handler; however:
Package libccid is not configured yet.
Package pcsc-ifd-handler is not installed.
Package libccid which provides pcsc-ifd-handler is not configured yet.
dpkg: error processing pcscd (--configure):
dependency problems - leaving unconfigured
Setting up opensc (0.11.13-1.1) ...
configured to not write apport reports
Errors were encountered while processing:
libccid
pcscd
E: Sub-process /usr/bin/dpkg returned an error code (1)

Also Pcsc-tools not working now although I reinstalled it i get similar to above
Nice to learn a bit of linux but totally lost now. Reinstall Debian ??

Thanks very much for quick reply. i get this after I FTP and reboot. The card reader-Omnikey 3121. On front it has LH led lit but RH one is not
root@?????:~# opensc-tool -l
[opensc-tool] reader-pcsc.c:906:pcsc_detect_readers: SCardEstablishContext failed: 0x8010001d
[opensc-tool] reader-pcsc.c:1015:pcsc_detect_readers: returning with: No readers found
No smart card readers found.

I followed this guide the Debian way
http://linuxsat-support.com/li…key-readers-linux-pc.html
And I get this
root@????:~# opensc-tool list-readers -l
[opensc-tool] ctx.c:628:process_config_file: scconf_parse failed: Line 54: not expecting '0..3'
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
[opensc-tool] reader-pcsc.c:906:pcsc_detect_readers: SCardEstablishContext failed: 0x8010001d
[opensc-tool] reader-pcsc.c:1015:pcsc_detect_readers: returning with: No readers found
Readers known about:
Nr. Driver Name
0 openct OpenCT reader (detached)
1 openct OpenCT reader (detached)"

I may have interpreted these lines incorrectly:

And change thise lines by removing # from front and reader_drivers lines u delete one comand too:

reader_drivers = pcsc, ctapi;
try_emulation_first = yes;
lock_login = false;

What command do I delete ?
This what I did for line 54(seems to be error) :

reader_driver ctapi {
module /usr/local/towitoko/lib/libtowitoko.so {
CT-API ports:
0..3 COM1..4
4 Printer
5 Modem
6..7 LPT1..2
There is no module /usr/local/towitoko/lib/libtowitoko.so
Help very much appreciated

Quote from Maverick_BK

Debian 6.0.5

In crontab:
33 3 * * * root reboot
*/5 * * * * root checkoscam.sh

Reboot works,checkoscam no(manualy yes).

there are more than 1 crontab in Debian 6. there is a system crontab in etc/crontab which you access by nano /etc/crontab. It has 5 fields and then user and the command.
There is lso the user crontab which you access by crontab -e which also has 5 fields followed by command, no user or root. You can find/edit users' crontabs with crontab -u user
if you "man crontab " there is a lot more info.

Grateful for the info and please understand that as a newbee I am trying to learn from more experienced ppl like you. Also I hope I am not hijacking this thread

First off all you need to be using an patched image for the clone boxes otherwise you get the - no ca error -
Is this correct ??
dunno if there is more ways to solve this problem then using com port flash with dreamup software (correction needed ? should also be patched)
With DM800Se it seems easier to use browser and flash button on rear ?

So as long as you stay away from the original image's there shouldn't be a problem I've seen quite few clones that come with
the tuner more or less not fitted in the socket as they should which also can give some tuner issues when trying to configure them.
Easy solution here is to open up the box and see that the turner is fitted firmly in the slot, if not be sure to fit it correctly.

edit:
For an clean clone pli look for gjstroom patched ones they are stable and nice only ones I use
end edit:[/QUOTE]

I had always used these immages buI cant find any recent Gjstroon immages . Appreciate a link

I have same problem M8 with 3.0 Beta and 2.1 Beta. Its referenced on other sites as well without a consistent solution. Mine is not a tuner problem as it is fine with blackhole immage. Problem there is it thinks my box is a vusolo. the newnigma2 immage boots an then shuts down. I cant get oscam to work with any. Anyone know whats goin on ?

Thanks for great post. I am trying to use it in Debian 6 . I get "-bash: ./firewall: /bin/bash^M: bad interpreter: No such file or directory". I have used nano to set it up . I have changed iptables to /sbi/iptables and save file in /etc/init.d. only other change is i have commented out two lines in this section
case "$1" in
start)
echo "Starting iptables firewall"
# Only needed on NSLU2 - Disable them on regular Linux installations:
# modprobe ip_tables
# modprobe iptable_filter
flush_existing
create_chains
populate_chains
process_input_chain
process_output_chain
;;
stop)
echo "Stopping iptables firewall"
flush_existing
rmmod ip_tables
rmmod iptable_filter
echo "Firewall rules flushed"
;;
reload|force-reload)
echo "Reloading iptables firewall"
flush_existing
create_chains
populate_chains
process_input_chain
process_output_chain
;;
restart)
echo "Restarting iptables firewall"
flush_existing
create_chains
populate_chains
process_input_chain
process_output_chain
;;
*)
echo "Usage: /etc/init.d/ssh {start|stop|reload|force-reload|restart}"
exit 1
Not sure how much of this section should be "comment out"
Any help very much appreciated and special thanks to Ten Below