Posts by calisto

Have just loaded this up on my s9 but it is asking for password when I go to change anything in the menus section.

Not to worry have found out it's 0000

Quote from master G

The files beli1910 posted are the latest for dm800..You will need to upgrade with both files..

Hi,

where is the post with the files for DM 800 HD PVR please? Have searched but cannot find them, thanks.

Have just got this from a good friend to help with restarting oscam if it stops:

ssh into your pi now
with putty

type
ps ax
press enter
should give u a big long list of crap

in that list will be oscam running
just look for the word oscma

on the left of them they will be given a number ID
ie... 15532
or something
could be anything

sudo kill -9 ***

so now type
cd /usr/local/bin or wherever your oscam is
then type
sudo ./oscam -b -r 2

Quote from GeorgeXL

No succes, sorry.

No Worries m8, if you do can you post here & I will do the same :-)

Quote from GeorgeXL

I tryed this script on my raspberry and set cron for 1 minute, but instead of checking the oscam and restarting if it's stoped it will restart it every minute.

Can someone adapt it for raspberry ? Thanks.

Hi GeorgeXL,

did you get this set up on your PI & if you did any chance of a walk through please?

Thanks
Calisto

Hi,

does anyone know if this script would work with the Raspberry PI please?

Thanks
Calisto

Hi,

has anyone got a Raspberry PI set up as server running oscam & cccam? If they have any chance of a tut please?

Thanks
Calisto

Hi,

has anyone tried to get this to run on a Raspberry Pi, tried on mine but when I try to input the Gateway & DNS address it says permission denied, have checked what IP address is through IPconfig, so know I am inputting right address.

Thanks
Calisto

Have changed the port number & now all up & running with Oscam & CCcam with Pick TV. Thanks for all the help :-)

No, just left it as it is, told you I was a newbie.

Other half is watching The Voice at mo, so no playing with the box at the mo :-(

I type in http://ip_of_dm800se:16001 into my browser, asks for username & password, type in root & dreambox, it says wrong username or password, so try root & linuxsat & still says wrong user or password

In readers its saying slyuk but no ecm have been registered

In users it is saying off line with no clinets!!

There are no errors in oscam webinfo, the only thing that is near an error is loadbalancer: can't read /tmp/.oscam/stat

On the newcamd configuration in oscam webinfo it has got this

port 34000@0963:000000

Right have now got Oscam to see the card but still no channels are clearing, have restarted cccam multiply times but still a black screen, it looks Oscam is not talking to CCcam, have added this line to cccam.conifg:

N: 127.0.0.1 10000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Can it go anywhere in the config & is the 10000 right or does it have to be 14000 as that is the port I am using for cccam?

This from Oscam info:

63cb35df439d.jpg

So looks like Entitlements are updated to 08/07/12?

Thanks
Calisto

Ok, will give that a go, thanks for your input.

These are the errors I am now getting getting through oscam webinfo

2B719B70 r error opening device /dev/sci0
2B719B70 r error Cannot open device: /dev/sci0

Quote from master G

The oscam configs look fine, but there is a problem with CCcam.cfg

Remove the below line from CCcam.cfg, its not needed as oscam is the cardreader.

Code

BOXKEY:/dev/sci0 ** ** ** **

There is no N line in CCcam.cfg to connect CCcam to oscam, add the below N line to CCcam.cfg, restart oscam and CCcam, then post any errors you find from the log in oscam webinfo.

Code

N: 127.0.0.1 10000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Display More

Thanks for the reply, am away from the box at the mo but will test & let you know the results.

DigitalWorldz Images Are Based On OpenPLi

TSPanel
Rat's Channel Updater
CCcam
installed as standated

New Open Webif

New Bootscreen, this has been requested by some since v1 release, some of the cable folk will remember it

Clean image with no bulky add'ons left for the end user to add there own plugin/ipk files

SSL84b included

http://filepost.com/files/e469694b/digitalworldz_se_1.1.nfi/

Hi,

have got a sly uk card running well on my DM 800 SE with cccam 2.21 but want to use Oscam as card reader & cccam to share.

Have got Digitalworldz 1.1 image on box & have download cam Oscam 6611 with cccam 2.13 but cannot get anything on the screen apart for FTA channels.

Here is my cccam. config without clines:

SERVER LISTEN PORT : 14000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : yourchoice
WEBINFO PASSWORD : yourchoice
TELNETINFO USERNAME : yourchoice
TELNETINFO PASSWORD : yourchoice
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
#OSD USERNAME : yourchoice
#OSD PASSWORD : yourchoice
OSD PORT : 80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
EMM THREADS : 1
BOXKEY:/dev/sci0 ** ** ** **
#MINIMUM DOWNHOPS: 1
#LOG WARNINGS : /tmp/warnings.txt

and oscam files:

####oscam.conf####




[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1




[webif]
httpport = 8888
httpuser = 
httppwd = 
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255




[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000




####oscam.server####




[reader]
label = ***UK
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963




####oscam.user####




[account]
user = linuxsat
pwd = support
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963

Do I need to configure anything else please?

Thank you
Calisto