Posts by cazuela

In brief : NO..once you have setup DCC correctly first time and saved it,,
there´s no need to set up again...
if you have several servers to communicate with,,
simply just make a profile of each or anote the different passwords, IPs ,etc...

No problem updating from 2.4 to 2.5 on BH 203 now, the server might have been down when you tried..
I suggest you try again and please mention which image version you are trying on.

- 396 MHz ALi Processor M3602
- MPEG-2 / H.264 Hardware decoding
- Support 576i, 576p, 720p, 1080i
- Tuner: DVB-S2
- 1 x Smartcard Reader
- RS232 Interface
- 10/100Mbit Ethernet Interface
- 1 x Scart (FBAS, RGB or YPbPr)
- HDMI - 1 x USB 2.0
- S/PDIF Interface for digital bit stream out (AC-3)
- 4 MByte Serial Flash, 128 MByte RAM
- DiSEqC 1.0/1.1/1.2 support, 13/18V, 0/22K LNB control
- 5000 channels for TV/Radio
- Channel-change time < 1 second
- Blind scan
- EPG (Electronic Program Guide)
- OSD in many languages (English, French, German, Italian, Spanish, Portuguese, Turkish, Arabic, Persian, Thai etc.)
- Support Subtitle and Teletext
[COLOR='#FF0000']- Software upgrade by USB
- Support TWIN/SSSP/CCCam/NewCam/MgCam[/COLOR]
- Record Manager and Media Player
- External 12V power supply







Digital Satellite Equipment Control
EPG. Electronic Program Guide. Software that enables viewers to navigate easily among the large selection of channels provided by the digital technology and choose the service they desire
FEC. Forward Error Correction. Correction of faulty bits in the received signal
LNB(low-noise block converter). The LNB is an electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them to signals that can be used by Satellite Receiver
Parental control. A feature that allows parents to lock programs that they consider unsuitable for their children. A locked channel or program can only be unlocked with the password
PIN code. Personal Identification Number. A four digital code that is used for locking/unlocking channels and programs. as in the parental control feature
Polarization. Polarization allows several programs to be fitted into the same frequency band. The signals from a satellite are transmitted either with linear _vertical or horizontal) polarization or circular (right or left) polarization.
RS 232. Serial communication standard data port
Satellite dish. A dish-shaped antenna to receive signals from a satellite. The dish focuses the signals into the LNB.
Scrambled satellite TV program. Some satellite TV programs are transmitted in scrambled forms. smartcard and possibly a CA module is needed to view such programs.
Symbol Rate. Size of the digital package transmission

But cant find the right firmware for it....
still loooking ;)

As far as I can make out ,,NEWCAMD is possible...not sure of CCcam...but I imagine so..
try the new firmware if you haven´t already...
http://linuxsat-support.com/cl…-firmware.html#post121711

read the manual to get a feel for it..http://linuxsat-support.com/vu…vu-solo2-user-manual.html

for sharing ,its all there buddy : Forum Gateway - Powered by DnP Firewall

agreed,, had no hiccoughs on vix to mention ,
maybe trying to get vix to accept it was about as much,
have never had no problems with any BH images

Nobody ,,not even in Asia need to maintain 100 clients ,unless they are serving clients and not peers...
There really is no need for this so until you clarify you wont be getting an answer..
just as you havent been answered in any other site...(¿¿ theviper0308 sound familiar ??)

Quote from asiacs

sorry before buddy :D,
i already test it on 100 client on CCcam. still 1 day there are crash/CCcam stop run. may be u can help me give solution my CCcam cant crash again.

Quote from asiacs

This is not about how many F line, but how to run and check CCcam if crash and script can run automatic if CCcam there are 9 CCcam. That's it.

You are wrong buddy!!!
a) If you are asked to clarify something,then please show some respect and answer ..
b) This is all about how many flines you are supporting in each CCcam!!!!!
Why on earth do you think its crashing????

Read how to flash another image on your stb : http://linuxsat-support.com/mk…mk-maxdigital-xp1000.html
I would go for this image created by Master G as a starter :http://linuxsat-support.com/mk…ymod-backup-master-g.html
but as you really want to learn then you need to start reading and paying attention to details.
Choose whichever image you like from here : Forum Gateway - Powered by DnP Firewall
Remember, although it seems frustrating and complex, the fun of all of this is trial and error learning and then see and enjoy the result..

You have been around a while but never posted an intro - if you could do that now that would be appreciated.Introductions
That would be nice and also passs by site rules
thanks

Quote from iqbalbhawana

One more thing I might like to add is that I log into the box with DCC with changed password. The username is root.

Not sure if you are asking or stating but heres how to : http://linuxsat-support.com/ca…ge-dreambox-password.html

Quote from freck

Yes it does work on the solo2.
Ive it running on Black hole latest revision 2.? and it all good
Freck

can you upload some captures of it working on BH image please ??
As I haven´t found the solution as of yet..

maybe you aren´t subscribed to the whatever you think it should open....
Do not ask for soft keys here as we don´t keep them..

FTP this catseye settings ipk to volatile/tmp and install thru VIX..
then you can edit all sats/channels through dreamset or dreambox edit if you want..

what plugin(s) are you trying to install ??

You will get a reply as soon as you pass by INTRODUCTIONS and take the time to read the site RULES....

what do you mean ¿¿no lnb??? I have never seen nor read about such a message...
perhaps you need to install a channel setting bouquet first??
otherwise you will just be left with the initial startup image..
install this catseye ipk

Quote from DARRENHGV

What is the blackhole pcsc panel in ther it says pcsc service for usb readers current status stopped should this be enabled

NO , no need for hte pcsc usb readers to be started..
go back into devices managere and make sure its mounted,,
this thread might give you some ideas : http://linuxsat-support.com/vu…r-telnet-commands-vu.html

after any installing the box needs to be restarted,,,
then use the remote to activate CCcam

working fine here on BH 2.0.3 ..no problem to note