No need to post them bud as we already have it all available from our USEFUL LINKS in our NAVBAR above.
a921cafa84e0c901d46b5f08a.jpg
Posts by cazuela
-
-
For OE 2.0/3.0 based images
Choose the file ending mips32el.ipk, ftp the file to /tmp then install manually from your images addon manager.
Use DCC to FTP.
On BH images you already have xbmc launcher in plugins. -
my cccam softcam has stop working on my dm 500s,i have try a few but no joy, would some one have one that's works,i am using commando image,thanks
Have you checked that CCcam is running?
Make a backup copy of your CCcam.cfg file and reflash the image again, might be quicker in the long run.. -
a cccam compatible exist?
Yes , of course, you can find all CCcams on LINUXSAT SUPPORT PANEL HD 1.3 if it is not installed already. -
I´m afraid to inform you that you need to read the rules as BISS nor any other softkeys are permitted on this site.
For BISS, I have used oscamymod on an openpli image in the past. -
OK,
Download master G´s CCcam.cfg from post#2 on to your desktop.
copy/paste the C lines in the CCcam.cfg.
Save.
in DCC, FTP the CCcam.cfg over to /ETC folder.
Right mouse click over the CCcam.cfg file and you will see options.
What you want to change is the attributes to 644.
save and exit.
on remote control ,press BLUE and you should see installed CAMs.
use arrows to CCcam.
Press OK.
FULL restart box and if everything has gone according to plan you should be able to view PPV channels as long as the server is connected..
To check this , open your browser on pc and type in the INTRANET ( home network ) DM800 IP followed by port 16001.
it might look like this : 192.168.1.10:16001
The red 1.10 is just an example as only you know which internal IP you are using...
if it opens the page you will see if the servers are online and what platforms they have available for your use.. -
Quote
I have got my clines off my provider
OOOOOuchhhh... read the site rules buddy before you fall into a predicament!!
tell us which box and image version you are using.. -
Haven´t heard of how to add iptv through putty but ... [DOWNLOAD]PuTTY
But if you already have DCC( Dreambox Control Centre) then you already have FTP + TELNET ..
However , getting back to what you would like to try.
Read some of these options:
Forum: IPTV & Streaming Tutorials, HowTo & Guides -
The CCcam.cfg folder is missing what do I do with this file as I am not very good on any of this.Ok when running well but when it cocks up I am usless
John
First of all, CCcam.cfg is NOT a folder, it´s a file.( be careful of wording as it can be misleading)
Click on the HIGHLIGHTED links:
Where do i put the files in my box and what are they?
Where you put it depends on which image /version you are using for which box...
Getting Started - Flines & Clines For Beginners
All got from:
Forum: Cardsharing Tutorials, HowTo & Guides -
Robijay, thank you so much, I'm getting on well, but I still have some question to round up. You suggested we move this to another trend so that we don't hijack this forum. Please where can we go?
Sent from my A0001 using Tapatalk
if it´s related to this backup image then post here but if it´s related to something else, i.e; adding C lines, etc then in the relevant subforum please.. -
take a look through here bud : Forum: DM800 Clone Images
-
You dont state the exact model you have or which image you had on it before.
Click on this link to bring you to DM800 ,etc... for the support section
Forum: Enigma2 Support
The more info you give about the box the better somebody might be able to help you..
BTW-- Nice intro first post since 2013 !!!!( caz being ironic) -
So sorry for talking about the untalkable on this site Is there anywhere I can get some help other than here. Thanks in advance
There is no problem with talking about setups,,, but in this case,like many before, the problem lies with the server not the client.
Get yourself a legit subscription on any "shareable" platform that you´d be interested in which opens new paths to follow...
I am not for one minute recommending cardsharing, I am merely suggesting it as a possible/obvious solution to your viewing problem.QuoteSorry Cazuela my bad
Not at all buddy!!
You´re simply trying to help out,,but experience tells me how the thread was going and leading to..... -
Quote
The server is overloaded at the other end
An overloaded hop1 server can cause your file to connect to a Hop2 instead - but then keeps trying to get back on the hop1.
This is very typical service from a payserver so before we jump to any false conclusions, Please read the site rules regarding such activities... -
sold original duo2
Sold on this site or somewhere else bud??
it´s so we can close this thread.. -
No i don't have anything nor any CCam config, i'm just as new as my new Zero Box in this. i have being searching for a friendly Blackhole step by step guide for complete newbie like me, just like OpenVix do, i'm afraid now not to make any mistake. Is there any complete pdf guide for Blackhole anywhere, bcos i like to follow instruction...PLS HELP
I have to tell you I´m so jealous of your "noobiness" !!
The excitement of it all that lies ahead for you...
Enjoy the ride !!
To install a new image on VU+
I found it on here: Forum: Enigma2 Firmware / Image Flashing Tutorials, HowTo & Guides
This is an excellent guide although not specifically for the ZERO but:
Dummies guide for setting up your VU+
This next link is a general guidance, it is old but same general process:
noob flashing guide
In fact as you may have noticed ,,there is a whole lot of info on site,, it´s great reading ahead:
Forum: Vu+ Tutorials, HowTo & Guides
The only thing you haven´t mentioned is for what card do you need to set up????
But please post this in the correct forum as we shouldn´t really be hijacking this thread.. sorry Robijay bud!!! -
Robijay waiting for your response. Do I have to flash with the backup or need to flash with basic BH image and restore backup through FTP.
First of all , if you already have personal configurations, for example CCcam, then make a copy of your CCcam.cfg.
Flash your ZERO with this backup as you would any ZERO image.
You will need to add your own personal configuration to the image. -
We posted also Solo2 image. OpenSPA 5.006 is released for all vuplus receivers. But not Master G backup.
I believe diodio is looking for a ready made backup.
Otherwise clean image is here: OpenSPA 5.0.006 For Vu+Solo2
salu2 -
Nice first post introduction bud!!!!!
Where do i put the files in my box and what are they?
Getting Started - Flines & Clines For BeginnersForum: CCcam Tutorials, HowTo & Guides
To install CCcam2.30, unrar it and copy to a USB stick, plug in the usb stick and vix should ask you if you want to install it.
CCcam.2.3.0
CCcam.cfg file for newbies -
Quote
2.1.7 is getting stuck sometimes, loading.
This could be due to a number of things so hard to pinpoint just one reason....QuoteAlso rebooted when I tried to initialise the hard disk.
It should be rebooted if it doesn´t automatically, some image versions "lose" the HDD when loading.
saying that , you should only need to initialise the HDD first time.( this could be the answer to problem 1 )QuoteWhich image (there seem to be many) is stable?
BH is as stable as any other I have tried out, saying that ,again ,it is down to a personal choice as to which image best suits your needs.
if you want to see how BH performs why not try out a ready made backup image?
click on the link and go to post #1 : BlackHole 3.0.1 Vu+ Solo2 Full Backup image by mckee25
you will find other backup images here: Forum: Vu+ SOLO2 Backup Images
REMEMBER TO HAVE A BACKUP COPY OF YOUR OWN PERSONAL CONFIGURATIONS FIRST,etc....
