softcam feeds changed at some point last year so probably needed re installing to re download cams.
Posts by dsayers
-
-
very intrested in this what is the file I use please that is working could some boday point me in the right direction please regards cat 123
Check here to see if your provider is listed https://www.suls.co.uk/enigma2-iptv-bouquets-with-epg/
If it is use the plugin if not use the e2m3u2bouquet.py and use the url based setup
Codepython e2m3u2bouquet.py -m "http://stream.fabiptv.com:25461/get.php?username=YOURUSERNAME&password=YOURPASSWORD&type=m3u_plus&output=ts" -e "http://stream.fabiptv.com:25461/xmltv.php?username=YOURUSERNAME&password=YOURPASSWORD"
You can see the latest releases within the above link.
-
thanks for your quick reply, but i think i need a url based setup (cause i have a url link), is there a video as well, cause i can't get rid of the no such file or directory notice?
Check if you're provider is supported by the plugin.
If using the script version ftp the e2m3u2bouquet.py to /etc/enigma2/e2m3u2bouquet create the e2m3u2bouquet folder if needed.
The 0.7 version doesn't mention the url method though https://www.suls.co.uk
-
so when you go into config, the xc folder can not set / media / hdd / xc?
try moving with the arrows which folders do you see?
is hdd mounted?
in the /etc/enigma2/setting file
What is written in the config.plugins.XCplugin.pthxmlfile?
eventually uninstall the plugin from telnet, download the llink plugin again and reinstall.
RegardsThe plugin is configured to /media/hdd/xc
But still brings up menu when pressing green.
I'll have look at the settings file and uninstall and install new tonight and report back thanks.
press green for config then blue to get to the team files then save, it changed since last few version
Thanks that worked. Must have missed that
-
so when you go into config, the xc folder can not set / media / hdd / xc?
try moving with the arrows which folders do you see?
is hdd mounted?
in the /etc/enigma2/setting file
What is written in the config.plugins.XCplugin.pthxmlfile?
eventually uninstall the plugin from telnet, download the llink plugin again and reinstall.
RegardsThe plugin is configured to /media/hdd/xc
But still brings up menu when pressing green.
I'll have look at the settings file and uninstall and install new tonight and report back thanks.
-
Hi Lululla with latest version 5.3 when I press green for config it brings up the menu and I can't get it to change servers.
I have my xml files in /media/hdd/xc and the plugin is set to that location but pressing green still brings up menu.
This used to be fine on 5.0 am I missing something new? I can provide you screen shots and debug log tonight if you want. Thanks
-
if your provider is supported just install the plugin and setup from the plugin.
FTP IPK to tmp
On box
- OpenATV this will be Press Blue Button -> Plugins -> Choose IPK Installer -> (3) Memory /tmp -> (1) Install Extensions -> select the IPK (OK) and press green
- OpenVix this will be ‘Menu -> Setup -> ViX -> Install local extensionReboot box.
- Open your plugins menu, (Green button as shortcut) there should now be a plugin named ‘IPTV Bouquet Maker (IPTV for Enigma2 – E2m3u2bouquet plugin)’
- Open this plugin.
Now you can choose your provider and enter password and configure the rest.
-
sorry mate. DsayersCustomMixImporterScreen is now ABMCustomMixImporterScreen
-
Forgot to mention that the Custommix plugin has been renamed to ABM CustomMix Importer due to it being able to import various custommix files.
-
Translated to English, with the code modified to prevent the German IP status site that the plugin scrapes from giving the annoying German after the Country flag and before the IP
Now it just gives the Country Flag and the IP in use.
Ian.
Hi thanks for this it works but I had one of my conf files incorrectly set so when choosing that location it should give error message openvpn could not be started. With this plugin.py I had a crash see log attached.
< 94740.977> Traceback (most recent call last): < 94740.977> File "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action < 94740.977> File "/usr/lib/enigma2/python/Plugins/Extensions/VpnChanger/plugin.py", line 235, in keyOK < 94740.978> self.session.open(MessageBox, _("Could not start VPN config!" % vpn), MessageBox.TYPE_ERROR, timeout=10) < 94740.978> TypeError: not all arguments converted during string formatting < 94740.978> [ePyObject] (CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x9d168d28>>,('OkCancelActions', 'ok')) failed)
If I use the standard plugin.py I dont get a crash but the error message is in German. Thanks
-
What if I used opkg update && opkg --force-reinstall --force-overwrite install openvpn &> /dev/null 2>&1
Would this be bad for people on older and patched images?
-
I have commented out wget command and used opkg --force-reinstall --force-overwrite install openvpn &> /dev/null 2>&1
Till I can work out an alternative solution.
-
Hi is there a generic openvpn ipk?
I have been working on a script to download and install openvpn as well as download the configs for my private network.
Script here
This works great until someone reported they receive feeds down for maintenance when going to openvpn when trying on an older image, the script is supposed to take care of that but I guess not so is there a generic IPK or will that not work as there are dependencies to install other files?
-
After it has ran try pressing menu it will tell you if something is wrong ie password or username.
-
Hi JensonEverest... did you manage to get the old grey matter round this...
and dsayers
Simple answer is no mate.... not for the lack of trying. The epgimporter plugin works just fine but no matter what i do crossepg will not phase the same files.... something has changed with crossepg plugin.... i have one more plan for the problem i will test over the next few days time permitting. For the time being i am using crossepg for 28.2 and the epg importer plugin for the rest....
I have been working on an even simpler solution but it is still just an idea at this stage, vip members can help with testing here:
I haven't had chance to test yet but looking at latest commits on oe alliance this is the only file that has been changed https://github.com/oe-alliance…mmon/xmltv/xmltv_parser.c
-
My EPG seems to have gone again using JensonEverest.confs, i have used the new ones as per the update in #1
Ok for a day or so, now it zips through Update In seconds... any ideas...
Noticed an issue myself this morning will sort it out when indoors tonight thanks for the heads up
Hi jenseneverest did you have chance to look at this? I'm using the crossepg conf file for Virgin EPG and it seems EPG data isn't filling in at all. I use EPG Refresh as a backup so not a major issue thanks.
-
Maybe close this thread as we now have a solution for AUDIO
issues -
I am looking for autobouquetsmaker 2.9 mipsel ipk (to try and fix the audio issues). I'm running BH, do you need to build the IPK from git? I manually edited the cable_uk_virgin.xml which was the last file committed to git, however SkySport MainEvent HD still has no sound. Any ideas?
The fix has been applied to images so just updating ABM won't fix it. You'll need an updated image built from today or later.
I'm not sure if you can do software updates on BH or if you need to flash new. You'll also be best waiting till tomorrow as most images do updates nightly.
-
yeh been doing my head it, iv been looking at powervu settings (looks same ie lamedb) and seeing if anything can be edited in oscam.dvapi, but im at a total loss
the lack of streaming is a big problem to me, its like the box is in single tuner mode even when on the 1 channel you want to stream
Yea a royal pain. My vu uno 4k is pretty much useless.
hows your custom mix, does that still work or not now
Yes custommix files still work both sat and cable mixes. You still need to update ABM or modify the lamb file for audio issues and use oscam.
-
yeh been doing my head it, iv been looking at powervu settings (looks same ie lamedb) and seeing if anything can be edited in oscam.dvapi, but im at a total loss
the lack of streaming is a big problem to me, its like the box is in single tuner mode even when on the 1 channel you want to stream
Yea a royal pain. My vu uno 4k is pretty much useless.
Guess we still need to wait for tweaks