Hi, where would i find the libcrypto.so.1.0.0 file for csky
Posts by EnoSat
-
-
Hello guys,
All the PV channels on the Thor 0.8W satellite not working anymore (Discovery Central HD, Science Europe HD...)
Am i missing something ?
Have searched on the forum and the net, without any luck.
I'm using Levi45 Multicam Manager v8.0 + Levi 45 Arm Emu Keys Updater on BH image Vu+
Any advice are welcome :)
Thanks and cheers
must manual update lamedb and use oscam11704emu
-
-
more african and asian providers not verified if work in CCcam, 06xx000x,09xx000x,0BxxXXXX,18xxXXXX its FAKE - CCcam read only id=0 (removed from file), fixed old providers
-
OpenATV 7.0
Code* opkg_download_backend: Failed to download http://updates.mynonpublic.com/oea/5.0/cortexa15hf-neon-vfpv4/Packages.gz, wget returned 8.
https://updates.mynonpublic.com/oea/ - planned added 5.0 ?
-
Compiled by Levi45
oscam-svn11681-arm_dream-webif-dvbapi-libusb-emu798
oscam-svn11681-dreambox_fpu-webif-dvbapi-libusb-emu798
oscam-svn11681-dream_one-webif-dvbapi-libusb-emu798
oscam-svn11681-hd51-webif-dvbapi-libusb-emu798
oscam-svn11681-openpli40-webif-dvbapi-libusb-emu798
oscam-svn11681-osmio4k-webif-dvbapi-libusb-emu798
oscam-svn11681-rasb_hard-webif-dvbapi-libusb-emu798
oscam-svn11681-sh4-webif-dvbapi-libusb-emu798
oscam-svn11681-sh_4-webif-dvbapi-libusb-emu798
oscam-svn11681-solo4k-webif-dvbapi-emu798
missing for coolstream, coolstream2
please try this oscam in attachment
none
-
Compiled by Levi45
oscam-svn11681-arm_dream-webif-dvbapi-libusb-emu798
oscam-svn11681-dreambox_fpu-webif-dvbapi-libusb-emu798
oscam-svn11681-dream_one-webif-dvbapi-libusb-emu798
oscam-svn11681-hd51-webif-dvbapi-libusb-emu798
oscam-svn11681-openpli40-webif-dvbapi-libusb-emu798
oscam-svn11681-osmio4k-webif-dvbapi-libusb-emu798
oscam-svn11681-rasb_hard-webif-dvbapi-libusb-emu798
oscam-svn11681-sh4-webif-dvbapi-libusb-emu798
oscam-svn11681-sh_4-webif-dvbapi-libusb-emu798
oscam-svn11681-solo4k-webif-dvbapi-emu798
missing for coolstream, coolstream2
-
Hi all,
I installed a pre-configured Oscam r11425 (oscam-1.20-unstable_svn-r11425) on a BlackHole-3.0.5-vusolose image.
After doing this, my sky red card which before could open freeview channels like "Made in Leeds", etc. does not work anymore.
I guess this is caused by a strange configuration which uses two readers (protocol emu) and one proxy (protocol constcw). In fact, even if I create a new reader according to the suggestions I found in different threads on this forum, the channels are not descrambled and all ECMs are filtered.
Any suggestions?
Thank you in advance.
same problem with 0960 in oscam and gbox , but scam359 and cccam230 work OK with this card {0963 card work ok in oscam}
-
or dowload full log by this link https://www.sendspace.com/file/qcgg92
show only
0100:01E3 not defined reader
0100:3420 invalid ECM
0100:3422 expired provider on card
not tested mapping to old seca provider ?
-
crash bootloader -> transfer failed
-
hello joeuser and the entire linuxsat this is me after a brief illness pls have still never get my autoroll set working with dm800 here is my files for any expert corrections:
VERSION: OSCam r11273OSCAM.CONF
[global]
logfile = stdout
initial_debuglevel = 64
nice = -1
preferlocalcards = 1
emmlogdir = /etc/tuxbox/config/oscam/[cache]
[streamrelay]
stream_relay_enabled = 0[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1OSCAMUSER
[account]
description = dvbapi
user = linuxsatsupport
group = 1
keepalive = 1
au = 1OSCAMSERVER
[reader]
label = emulator
protocol = constcw
device = /etc/tuxbox/config/oscam/constant.cw
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000[reader]
label = SoftCam.Key
protocol = emu
device = /etc/tuxbox/config/oscam/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 2LOG
18:37:31 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:32 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:32 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:32 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:080C818D6C892ED65FDC1D38B4C4A090): rejected reader sid (2 ms) by emulator - HD Sport 24
18:37:33 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:33 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:34 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:34 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:34 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:BD69339A2E9350A8D0414A212E4A81BC): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:34 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
18:37:34 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:35 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:36 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:36 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:387BADAE8A5512FE9701B804119F2FCB): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:36 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:36 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:37 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:38 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:38 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:6029A4AD20C50DF8B630F5402DEA7487): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:38 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:38 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:39 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:40 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:40 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:A0D703D8AFC1039D3D06DDBC4913E334): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:40 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:40 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:41 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:42 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:42 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:4B581EAB6BAA9297B20B0A62C6B77A1E): rejected reader sid (4 ms) by emulator - HD Sport 24
18:37:42 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:42 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:43 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:44 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:44 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:98A52CF6FCDF8A4F7C1B9D816F9AE21D): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:44 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:44 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:45 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:46 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:46 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:64D7A8ED5D6922BF611C848860438A5A): rejected reader sid (4 ms) by emulator - HD Sport 24
18:37:46 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:46 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:47 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921pls any help is welcome for me to also get this working with my dm800 thanks LINUXSAT
after re-edited my files to
server:
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 1,2,31,1 # Recommended value = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000user:
[account]
description = dvbapi
user = linuxsatsupport
group = 1
keepalive = 1
au = 1conf:
[global]
logfile = /etc/tuxbox/config/oscam.log
initial_debuglevel = 65535
pidfile = /etc/tuxbox/config/oscam.pid
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 10000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
cwlogdir = /etc/tuxbox/config/
emmlogdir = /etc/tuxbox/config/[cache]
[streamrelay]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
# delayer = 60
user = linuxsatsupport
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1the log is attached
what can i be missing? i need help
(dvbapi) Demuxer 0 has 1 ecmpids, 3 streampids, 1 ecmfilters and 0 of max 0 emmfilters
-
the issue is running gbox 8xx on solo4k, it works fine on my legacy mips receiver. Would like to get it working using arm version or mips emu on the solo 4k
if use openpli based image need pmt helper deamon
-
thanks. To test I used a know biss key for fox sports hd on 7east but it isn't opening. I tried the constcw file in var/keys as well as etc/tuxbox/config
C: { 0046b10c ffff ffff 0001 0100 { AAxxxxxxxxxxxxxx AAxxxxxxxxxxxxxx }} #7e Fox Sports Europe HD
-/tmp/pid.info-
**** Stream Information ****
ns: 0x0046B10C
tsid: 0x0000
onid: 0x0000
sid: 0x0001
epid: 0x1011
vpid: 0x0100
pmt pid: 0x0800
pcr pid: 0x0000
ECM: CaID: 0x2600 -> CaPID: 0x1FFF
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****-/tmp/ecm.info-
==== Constant ECM on CaID 0x2600, pid 0x1FFF ==
CW0: AA xx xx xx xx xx xx DD
CW1: AA xx xx xx xx xx xx DD
decode:Internal
Signature ok-/usr/keys/constcw-
#C: { Namespace TSID ONID SID VPID { ................ ................ }} ;comment max 128 active lines at git806, 64 lines to git804
C: { 0046B10C 0000 0000 0001 0100 { AAxxxxxxxxxxxxDD AAxxxxxxxxxxxxDD }} ;FOX SPORT EUROPE (7E/12556V)
or
#0: { CaID SID { .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. }} ;comment max XXX active lines at git806, XX lines to git804
0: { 26 00 00 01 { AA xx xx xx xx xx xx DD AA xx xx xx xx xx xx DD }} #FOX SPORT EUROPE (7E/12556V)PS: more BISS channels use SID-0001 , that better use C line as 0 line
-
Can I ask how you enabled logging I tried to amend to this in the mg_cfg
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 } /tmp/mgcamd.logBut there is no output in the file.
L: { 07 } 192.168.1.50 8025 /tmp/mgcamd.log
-
Please share a little more detail on the above comments posted in the forum.
Presently I am using a linux server with smargo card reader.
Where do i put the above and how do i get the keys?Thanks.
must extract from card or original box
-
try new gboxnet and added data to nds file:
Code
Display More#################################################################### # [CAS] Videoguard Boxkey/Camkey # UA - card unique address (4 byte) # BX - boxkey (4 byte) # CX - hwkey (16 byte) # DX - ekpair (16 byte) # EX - aeskey (16 byte) # # B: { UA UA UA UA { B0 B1 B2 B3 }} # old format: # N UAUAUAUA B0B1B2B3 # # example *** V13 - # N 01234567 00000000 # # set hwkey and ekpair for overcrypt step dcw = overcrypt(ccw,hwkey,ekpair) # C: { UA UA UA UA { C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF { D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF }}} # set aeskey for overcrypt step dcw = overcrypt(ccw,aeskey) # C: { UA UA UA UA { E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF }}