(ATR: CE FC FE 02 3C C0 8C 8C 0E B0 32 0E B2 7E 0E BC CE CE 72 3C B2 BC)
Could there be a problem with the card reader?
So what is the correct ATR value?
ATR : 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
Posts by EnoSat
-
-
PLUSTELKA | Televízia, s ktorou si budete rozumieť
(3) ATR : 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
(3) Reset Baudrate = 9600 Baud
(3) Irdeto 2 V6.0 ACS 0.06
(3) Serial (UA) 4276xxxxxx (8F1xxx)
(3) Base 12
(3) Provider00 03 FA xx date 04.04.2024
(3) Provider01 FF FF FF date 04.04.2024
(3) Provider02 FF FF FF date 04.04.2024
(3) Provider03 FF FF FF date 04.04.2024
(3) CaID1 0667
(3) CaID2 0668
(3) CaID3 0601
(3) CaID4 0602
(3) Camkey 112233448F1xxx12
(3) Camkey OK - 312 ms
(3) Working Baudrate = 7258 Baud
-
Is it possible to modify oscam to accept the Plustelka card (0668)?
-
Choose the key that suits you (TEXT,TV,RADIO,OK,HELP,INFO,RED,GREEN,BLUE,PVR,0,1,2,3,F1,F2,F3)
-
How does DES decoding work for you in PowerVu (1W/TV5, 5E/SIS, 5E/MTN, 16E/SNAI, 16E/IPPICA) in aarch64 (DM One-Two)?
CW shows OK (sometimes ECM Checksum error), but no picture.
With CSA in PowerVu (9E/AFN) , the picture is fine.
-
start oscam 19:37 , key found 19:41
can you post your config ?
I use the starsat 2000 hyper receiver to decode the afn code and then copy it to the vu+ ultimo 4k receiver.
in oscam.server
Code
Display More[reader] label = EMU enable = 1 protocol = emu device = emulator disablecrccws_only_for = 0E00:000000 caid = 0500,0E00,1010,2600,44A0 detect = cd ident = 0500:021110;0E00:000000;1010:000000;2600:000000;44A0:000000 group = 2 emmcache = 2,1,2,1 emu_auproviders = 0E00:000000;1010:000000;44A0:000000in oscam.conf
Code[global] disablelog = 0 logfile = stdout;syslog;/tmp/oscam.log initial_debuglevel = 66 maxlogsize = 0 preferlocalcards = 2 ecmfmt = c&0p/s/d/i/l_w HOP:j:g_t disablecrccws_only_for = 0100:00006D,003311;0500:032830,042820,030B00,041950,060A00,060C00;0604:000000;0624:000000;098C:000000;098D:000000;09C4:000000;09CD:000000;0B00:000000;0B01:000000;1708:000000;1810:000000;1811:000000,003311,003315;1813:000068;1819:00006D;1884:000000;0E00:000000 -
have you checked the HASH, does it agree with the data in your softcam.key?
e.g.
- 2024/03/22 20:17:07 69498089 r (emu) channel hash: 1BB706A6, group id: 3592
- 2024/03/22 20:17:07 69498089 r (emu) Key not found or invalid: P ****040E 00
- 2024/03/22 20:17:07 69498089 r (emu) Key not found or invalid: P 3592FFFF 00
- 2024/03/22 20:17:07 69498089 r (emu) ECM failed: Key not found
CodeP 1BB706A6 GROUP 3592 ;TV5 (0.8W/12643V)or
- 2024/03/22 20:29:48 73712CE8 r (emu) channel hash: 9798A8F2, group id: 0090
- 2024/03/22 20:29:48 73712CE8 r (emu) Key not found or invalid: P ****006C 00
- 2024/03/22 20:29:48 73712CE8 r (emu) Key not found or invalid: P 0090FFFF 00
- 2024/03/22 20:29:48 73712CE8 r (emu) ECM failed: Key not found
CodeP 9798A8F2 GROUP 0090 ;(9E/11804V) -
-
-
Display More
post your config and which oscam version you use ...
########
please, use the latest oscam-11718 and provide a debug 6 (2+4) logs
##
as you like if you want send it in private
thanks
;
where ?
-
EMM-G in 11748-800 is ignored or wrong write (see log) for card start-up, card starts up only after EMM-U arrives (which is sometimes 10-15 minutes, sometimes 30 minutes), 11734-799 no problem with start-up card
-
this thread is about only my binaries
Hi, can gbox protocol support be added ?
PS: 11748-800 problem with EMM-G
Code
Display More2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: reader 0624 match since emmpid has no provid -> SEND! 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: Entered irdeto_get_emm_type ep->emm[3]=98 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: GLOBAL base = 13 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: emm skipped, get_emm_type() returns error 2024/03/19 21:42:13 7913DE68 c (reader) EMU [emu] EMM: reader_caid 0000 != emmpid caid 0624 -> SKIP! 2024/03/19 21:42:13 7913DE68 c (ecm) get cw for ecm: 2024/03/19 21:42:13 7913DE68 c (ecm) 80 70 39 C1 02 03 1F 41 00 06 80 30 F4 AB 7B 23 2024/03/19 21:42:13 7913DE68 c (ecm) 20 E3 36 31 BB 80 16 6C FF 03 2A E8 4B 92 CB 76 2024/03/19 21:42:13 7913DE68 c (ecm) AC 62 96 F7 15 F1 74 16 9C D4 EA 4E B0 25 AF 19 2024/03/19 21:42:13 7913DE68 c (ecm) 7C 1B D1 6E AD CA 0B E8 1A 82 0E F0 2024/03/19 21:42:13 7913DE68 c (ecm) LOCAL (0653&/3B78/0D96/1F41/3C_00000000000000000000000000000000 HOP:00:0000_0000): rejected group (0 ms) - Jednotka HD (no matching reader) 2024/03/19 21:42:13 7913DE68 c (ecm) cw: 2024/03/19 21:42:13 7913DE68 c (ecm) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2024/03/19 21:42:13 7913DE68 c (emm) emm: 2024/03/19 21:42:13 7913DE68 c (emm) 82 40 25 80 00 00 00 20 31 7C A6 17 51 2E 88 97 2024/03/19 21:42:13 7913DE68 c (emm) 3C 0C C2 B9 09 E3 12 D7 47 83 3A A2 C1 91 3C DB 2024/03/19 21:42:13 7913DE68 c (emm) 92 04 B2 99 1F AA 83 99 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: reader 0624 match since emmpid has no provid -> SEND! 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: Entered irdeto_get_emm_type ep->emm[3]=80 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: GLOBAL base = 10 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: emm skipped, get_emm_type() returns error 2024/03/19 21:42:13 7913DE68 c (reader) EMU [emu] EMM: reader_caid 0000 != emmpid caid 0624 -> SKIP! 2024/03/19 21:42:13 7913DE68 c (emm) emm: 2024/03/19 21:42:13 7913DE68 c (emm) 82 40 25 A0 00 00 00 20 63 46 88 73 11 2A 86 70 2024/03/19 21:42:13 7913DE68 c (emm) E1 06 46 C5 7D C6 AE 85 DD 4B F5 22 86 EF C8 F3 2024/03/19 21:42:13 7913DE68 c (emm) 2F 3E 5C A5 22 7C 3A FF 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: reader 0624 match since emmpid has no provid -> SEND! 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: Entered irdeto_get_emm_type ep->emm[3]=a0 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: GLOBAL base = 14 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: emm skipped, get_emm_type() returns error 2024/03/19 21:42:13 7913DE68 c (reader) EMU [emu] EMM: reader_caid 0000 != emmpid caid 0624 -> SKIP! 2024/03/19 21:42:13 7913DE68 c (emm) emm: 2024/03/19 21:42:13 7913DE68 c (emm) 82 40 36 80 00 00 00 31 AF 8C 0E 35 E2 3B B4 AA 2024/03/19 21:42:13 7913DE68 c (emm) E7 88 BF A5 B1 3B 3C 67 BC 12 7F 2E 35 F3 C1 30 2024/03/19 21:42:13 7913DE68 c (emm) B0 27 13 44 AE 16 FD 12 FE DC 5F 81 AE E7 9C 94 2024/03/19 21:42:13 7913DE68 c (emm) 11 7A DD 94 BB 3B 7F A5 DA 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: reader 0624 match since emmpid has no provid -> SEND! 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: Entered irdeto_get_emm_type ep->emm[3]=80 2024/03/19 21:42:13 7913DE68 c (reader) SLOT [irdeto] EMM: GLOBAL base = 10 -
Try using python to edit the ABERTIS stream
Code
Display Moreimport sys pid = int(sys.argv[1]) packet = sys.stdin.buffer.read(188) while packet !="": tspid = ((packet[1] & 0x1f) << 8) | packet[2] if tspid == pid : afc = packet[3] & 0x30 if afc == 0x10 : sys.stdout.flush() sys.stdout.buffer.write(packet[4:]) elif afc == 0x30 : sys.stdout.flush() sys.stdout.buffer.write(packet[packet[4]+5:]) packet = sys.stdin.buffer.read(188) -
I ran into some problems using image. Specifically with frequency scanning 11512H 30000 3/4 Eutelsat 16E. I changed Inversion, FEC, pilot and scanned Network scan, but I don't get channel names. Why is this happening?. Does it matter because the old Openatv 5.1 is in the background (flash)? I previously had Openpli 11.3 installed and there was no problem with the specified frequency.
Successfully scanned on the 12th attempt :D
Occasional show names from ONID-016E
capture_003_05122023_181921.png
Code
Display Moreroot@osmio4kplus:~# dvbsnoop 0x11 | egrep "Time|transport stream" | grep "actual" -B1 Time received: Tue 2023-12-05 19:00:54.367 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:00:55.014 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:00:58.368 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:00:59.015 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:01:02.368 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:01:03.015 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:01:06.444 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:01:07.046 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:01:10.445 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] -- Time received: Tue 2023-12-05 19:01:11.046 Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] ^C root@osmio4kplus:~#Code
Display Moreroot@osmio4kplus:~# dvbsnoop 0x11 | egrep "Transport|Original|Table_ID" | grep "Transport_Stream_ID: 1 " -A1 -B1 Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 675 (0x02a3) [= >>ERROR: not (yet) defined... Report!<<] Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 64 (0x0040) [= Croatian Post and Telecommunications | HPT – Croatian Post and Telecommunications] Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 366 (0x016e) [= Eutelsat Satellite System at 16°E | European Telecommunications Satellite Organization] -- Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 366 (0x016e) [= Eutelsat Satellite System at 16°E | European Telecommunications Satellite Organization] Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 64 (0x0040) [= Croatian Post and Telecommunications | HPT – Croatian Post and Telecommunications] Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 675 (0x02a3) [= >>ERROR: not (yet) defined... Report!<<] -- Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 675 (0x02a3) [= >>ERROR: not (yet) defined... Report!<<] Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 64 (0x0040) [= Croatian Post and Telecommunications | HPT – Croatian Post and Telecommunications] Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 366 (0x016e) [= Eutelsat Satellite System at 16°E | European Telecommunications Satellite Organization] -- Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 366 (0x016e) [= Eutelsat Satellite System at 16°E | European Telecommunications Satellite Organization] Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 64 (0x0040) [= Croatian Post and Telecommunications | HPT – Croatian Post and Telecommunications] Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 675 (0x02a3) [= >>ERROR: not (yet) defined... Report!<<] -- Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 675 (0x02a3) [= >>ERROR: not (yet) defined... Report!<<] Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 64 (0x0040) [= Croatian Post and Telecommunications | HPT – Croatian Post and Telecommunications] Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 366 (0x016e) [= Eutelsat Satellite System at 16°E | European Telecommunications Satellite Organization] -- Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 366 (0x016e) [= Eutelsat Satellite System at 16°E | European Telecommunications Satellite Organization] Table_ID: 66 (0x42) [= Service Description Table (SDT) - actual transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 64 (0x0040) [= Croatian Post and Telecommunications | HPT – Croatian Post and Telecommunications] Table_ID: 70 (0x46) [= Service Description Table (SDT) - other transport stream] Transport_Stream_ID: 1 (0x0001) Original_network_ID: 675 (0x02a3) [= >>ERROR: not (yet) defined... Report!<<] ^C root@osmio4kplus:~# -
On 15ºW, keys 00 & 01 are updated with EMM, and create cw0 and cw1 every few seconds, but black screen.
It's a config problem?
no, oscam-emu not support ECM mode for 15W
-
How to grab HEVC UHD on enigma2 ?
-
Is possible get access to abertis from gigablue uhd quad 4k receiver ? I try get some information but no results..
for ABERTIS it does not need a DVB-S2X MIS tuner, it needs only DVB-S2 tuner
-
Vuelva a compilar el archivo de script de abertis de e2 para su sistema
recompile the abertis script file from e2 for your system
-
this thread for GX, not for ARM !!!
etc:
Code
Display More[root@gx6602 /]# cat /proc/cpuinfo Processor: 0 CPU: CK610MA(0x102816a2) FPU: none Clocking: 889.65MHz BogoMips: 593.10 Calibration: 296550400 loops Dcache_size: 8KByte Icache_size: 8KByte Dsram_size: 12KByte Isram_size: 0KByte -
