Posts by samur
-
-
-
OSCam-11764-Amiko A4_A5
;
OSCam-11764-Android-stapi
ConfigDir: /data/plugin/oscamemu
List of STB's:
Openbox AS4K CI Pro+, ...etc
ICONE IRON Pro,...etc
;
###
Request, questions and helps : Here...!!!
-
-
-
OSCam-11764-801
List of STB's:
Octagon SX88
Octagon SX88+
Octagon SX88+ Optima
Octagon SX88+ Combo
Octagon SX888 IP
Octagon ASAT HDR No.1
###
Denys H.265
Denys H.265_EU
Denys H.265_PRO
Denys H.265_PRO_Combo
Denys H. 265_PRO_Combo_EU
##
Golden Interstar ALPHA X
====
Denys 2 / 2.2
Octagon SX87
;
###
Request, questions and helps : Here...!!!
-
-
What settings do you have on oscam?
Para ler o 6A
This config works only with my special OSCam
Code: 1814 [ Global mode ]
Display More######################################## ## reader configuration ######################################## [reader] label = Cameleon_1814 protocol = internal device = /dev/sci0 autospeed = 0 caid = 1814 mod1 = xxxx key3588 = xxxx data50 = xxxx mod50 = xxxx idird = FFFFFFFF nuid = xxxx cwekey = xxxx detect = cd nagra_read = 1 detect_seca_nagra_tunneled_card= 2 mhz = 368 cardmhz = 368 ident = 1814:000000,005211 group = 1 emmcache = 1,1,2,0 blockemm-unknown = 1 disablecrccws = 1 auprovid = 005211
;
-
if it opens, that means I need to extract some data from the box, correct?
yes, for the '6A' Channels to work you need to have a correct data :
and for the '64' channels works without nuid and CWPK[0]
but it's good to have all the data's in the config then both '64' and '6A' Channels will work.
;
-
perhaps it should be more obvious putting the aarch64 file in CoreELEC thread too.
yes, i know but just i prefer armv8 of aarch64 .
-
dreambox 800se openpli not works
Install libusb from the feed
Or return 10 pages before and read ...
;
-
-
samur can you please add cachex with pcsc and l2b and i cam and cak7 from mibsel and arm in your new releases thanks in advance
( RE: Samur - OSCam For Mipsel Boxes [ VuPlus HD, DM HD, ] )
( RE: Samur - OSCam For sf8008 and others [ boxes_Arch:arm ] )
If you have problems to configure cak7 cards with my OSCam then just report and i will help you.
;
-
If someone has 'sh4-stapi' receiver
Please, test these 2 versions and report ...if CS, Biss and RusMir are OK ...
1)_ OSCam-11760-801 (SH4-stapi).zip
2)_ OSCam-11760-801 (SH4-stapi)-test-patchs.zip
Thanks,
-
Please, test these 2 versions and report ...
1)_ OSCam-11760-801 (SH4-stapi5-v0.0.5).zip
2)_ OSCam-11760-801 (SH4-stapi5-v0.0.5)-test-patchs.zip
Thanks,
-
card for DVB-T/T2 platform,
the card was sold without a CAM module,
EnoSat you try to use the the 'dynamic camkey' of the 0624, but since the 0668 is not l2b ,
that's why it doesn't work .
you have to use the same configuration as the original oscam-trunk
for the 0668 card . (add the rsa and box key to the configuration)
####
For the aarch64 Device you will need to find a correct config:
you should try to find the right data speed for the card,
you should somehow synchronize the reader with the card...
https://wiki.streamboard.tv/wi…nfig/oscam.server#cardmhz ((cardmhz, mhz, autospeed)
;
-
Is there any configuration available for nova 13e and use with original card.
Do you have your Chip-ID and CWPK key ?
-
-
ATR : 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
Yes, i said before provide a debug 6 log in .txt format file...
Or post your Card Files ...
-
Hi Samur,
Wich version Oscam is the best for VU+DUO4KSE ARM architecture image OpenPLI Release 9.0 ? I watch "Tricolor TV" CI+ with official Russian card + shara
Thanks for the answer
;