Posts by ahmed gazye

    After changing the start address I now get a timeout error when I try to reload the E2 image. This doesn't happen when loading a Spark rescue image but none the less the Spark side of my A2 does not boot either. They both hang on "boot" occasionally E2 will boot to what is supposed to be the time display.

    Is this a lost cause and a good door stop or can I recover it somehow? I'm open to suggestions here :)



    Wt

    Use the method for this topic literally while you are on Spark System

    f you do not succeed with you, follow my topic on the link


    Amiko Alien 2 u-boot S25FL016A.bin


    Use at your own risk!


    Emergency HowTo: Overwrite boot loader

    =======================================


    Use only in an emergency!


    - Switch off the box, then connect to a PC / laptop using a null modem cable (RS232)

    - Start HyperTerminal and create a new connection

    -> select correct Com interface

    -> Bits per second: 115 200

    -> Flow control: none


    - Then transfer> send file

    - choose correct uboot-xxx.bin

    - Protocol: Ymodem

    - Click send!


    > now switch on the box!

    - When switching on, keep the [OK] key pressed until [FORC] appears

    - then press the left arrow key [<]

    - R232 appears on the display


    Now the transmission takes place, which should take about 2 minutes.

    Under no circumstances switch off prematurely or other maneuvers in this phase!



    If you do not have enough experience, you can go to a specialized technician to recharge the flash drive, which is best


    138268-6a27f64e2e9a32c7b42-png




    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck
    ?thumbnail=1

    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png




    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    Open Vision 10.2 r360 enigma2 image spark usb.zip & tar.gz 25/2/2021


    The version compiling by Persian Prince today

    He stated that he had integrated the SH4MultiBoot plugin

    I did not try the version because it was only downloaded now

    Thanks him and his team

    138268-6a27f64e2e9a32c7b42-png


    My friends

    openvision-e2-extralanguage-py2-10.2-r360-spark



    150931-a9f5e45bf58c6e6be-jpg



    846839748.gif


    https://download1594.mediafire…2-10.2-r360-spark_usb.zip


    https://download1513.mediafire…y2-10.2-r360-spark.tar.gz


    138268-6a27f64e2e9a32c7b42-png




    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck
    ?thumbnail=1

    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png




    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    Open Vision 10.2 r360 enigma2 image spark 7162 usb.zip & tar.gz 25/2/2021


    The version compiling by Persian Prince today

    He stated that he had integrated the SH4MultiBoot plugin

    I did not try the version because it was only downloaded now


    Thanks him and his team

    138268-6a27f64e2e9a32c7b42-png


    My friends

    openvision-e2-extralanguage-py2-10.2-r360-spark 7162



    150931-a9f5e45bf58c6e6be-jpg



    846839748.gif

    https://download1326.mediafire….2-r360-spark7162_usb.zip


    https://download1584.mediafire…0.2-r360-spark7162.tar.gz


    138268-6a27f64e2e9a32c7b42-png




    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck
    ?thumbnail=1

    - Rescue Soft must be installed while you are on the Spark system, not a system enigma2 Until it is accepted

    - It is possible not to accept Soft Rescue from the first times, meaning that you repeat the process once, two and three until it ends and the receiver accepts the software even if it did not succeed. Download another copy of Softrescue until you succeed, God willing,

    Most of the problems of not accepting the software will be a defect from the flash that the device cannot read from

    Take care of the following things

    use kingston or sandisk usb 4 or 8 GB

    FORMAT your USB Pen Drive in FAT32, DO NOT choose the quick format as it will not work

    Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr software only.

    unzip the attached file, transfer the file to the usb and place it in the device.


    Follow the way with my topic on the following link

    - Rescue Soft must be installed while you are on the Spark system, not a system enigma2 Until it is accepted

    Method of passing the rescue-image for Spark devices using Cisco TFTP Server

    If you do not succeed with you, follow my topic on the link

    Method to returns RAM load from point 0x80000000 devices Spark processor 7162 to accept Soft Rescue

    Amiko Alien 2 u-boot S25FL016A.bin


    138268-6a27f64e2e9a32c7b42-png



    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck
    ?thumbnail=1

    I scrounged up enough connectors to make a RS232 cable and was able to get into the STB but that was about as far as I could get. I could not get the Cisco utility to allow me to upload and files. I have attached what I managed to get so far.


    Thanks for any suggestions


    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png




    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    Open Vision 10.2 r358 enigma2 image spark 7162 usb.zip & tar.gz 23/2/2021


    The version compiling by Persian Prince today

    The version works perfectly

    Thanks him and his team

    138268-6a27f64e2e9a32c7b42-png


    My friends

    openvision-e2-extralanguage-py2-10.2-r358-spark 7162



    150931-a9f5e45bf58c6e6be-jpg



    846839748.gif

    https://download1591.mediafire….2-r358-spark7162_usb.zip


    https://download941.mediafire.…0.2-r358-spark7162.tar.gz



    138268-6a27f64e2e9a32c7b42-png


    Image of my device processor 7162

    165944-c7ddf6637879b292a615c21-jpg

    138268-6a27f64e2e9a32c7b42-png

    165945-e1d5b94030bdf004008cba6-jpg


    138268-6a27f64e2e9a32c7b42-png




    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1

    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png




    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    Open Vision 10.2 r358 enigma2 image spark usb.zip & tar.gz 23/2/2021

    The version compiling by Persian Prince today

    The version works perfectly

    Thanks him and his team

    138268-6a27f64e2e9a32c7b42-png


    My friends

    openvision-e2-extralanguage-py2-10.2-r358-spark



    150931-a9f5e45bf58c6e6be-jpg



    846839748.gif


    https://download1522.mediafire…2-10.2-r358-spark_usb.zip


    https://download849.mediafire.…y2-10.2-r358-spark.tar.gz

    138268-6a27f64e2e9a32c7b42-png

    Image of my device processor 7162


    c7ddf6637879b292a615c21.jpg

    138268-6a27f64e2e9a32c7b42-png

    e1d5b94030bdf004008cba6.jpg


    138268-6a27f64e2e9a32c7b42-png



    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1

    I have a Alien 2 that was fouled up by a power glitch ( rapidly off and on ) It displays "BOOT" and will not go further. If I force a boot that part shows "Success" but from there on it just displays boot. I haven't built a RS232 cable yet as that may be what I end up having to do,but where can I locate 1.2.51 E2 ? I have tried the rescue image and it does the same as all the rest.

    Thanks for any help


    WT

    Follow the way with my topic on the following link

    Method of passing the rescue-image for Spark devices using Cisco TFTP Server


    If you do not succeed with you, follow my topic on the link

    Method to returns RAM load from point 0x80000000 devices Spark processor 7162 to accept Soft Rescue


    You are in the wrong section you have to go here You will find topics, explanation and software

    Spark


    Reform must be done by Spark System

    138268-6a27f64e2e9a32c7b42-png


    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck
    ?thumbnail=1

    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png




    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    Please notice
    Do not download any copy until version 358, it all has a problem with the remote and the image and

    I wrote to the team to fix


    park 7111& 7162 openvision 10.2-r358


    The version was installed on the external flash drive spark 7162 by NFR4XBoot plugin


    but The remote control not works


    Must use the special openwebif remote to complete the settings , but the exit button does not work and causes crushing


    Lircd.conf has changed

    by Attachment the remote works but jumps




    Image




    Image




    Image


    When working on any channel, crash occurs in the version




    Image


    Crush logo



    Wait, the download will be from the thread when the version is valid

    138268-6a27f64e2e9a32c7b42-png


    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1

    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png




    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    Please notice
    Do not download any copy until version 358, it all has a problem with the remote and the image and

    I wrote to the team to fix


    park 7111& 7162 openvision 10.2-r358


    The version was installed on the external flash drive spark 7162 by NFR4XBoot plugin


    but The remote control not works


    Must use the special openwebif remote to complete the settings , but the exit button does not work and causes crushing


    Lircd.conf has changed

    by Attachment the remote works but jumps




    Image




    Image




    Image



    When working on any channel, crash occurs in the version




    Image



    Crush logo


    Code: Select all


    Wait, the download will be from the thread when the version is valid

    138268-6a27f64e2e9a32c7b42-png


    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1

    Restart ur enigma ur problem solved automatically

    Thanks my brother Saeed, I restarted e2 several times but VFD does not work, it is on the display constantly number 100. When I try to install freeserver cant because there are no python-requests. I was looking for it in setup-software managment-advanced option-packet menagment but there are no python-requests module so do you have any idea where to find and how to install that module for this very good image?

    It is an develop version that is not a Formal.team does not support the device VFD does not work well

    python-requests With attachments extension ipk Easy to install by DreamExplorer , GlassSysUtil Plugins

    or

    by DCC put it in tmp &Write the following command in Telnet

    opkg install --force-overwrite /tmp/*.ipk

    138268-6a27f64e2e9a32c7b42-png


    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1

    161388-839fd4e7b2de2cc-png


    160920-996b0a4bf5dfdb0a11a6f374-png



    ?thumbnail=1

    165221-a377e5ff8e751e7f95ebdb-png


    222338324.gif

    Thanks linuxsat25

    oscam-svn11686-emu-r798

    Another version of linuxsat25

    Changeset 11686

    :

    Code
    fix ticket #4841 #4842
    thx @opti @chimpie23



    222338324.gif



    Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only


    222338324.gif


    But modern versions must Installing through ipk extension

    This has provided us with the extension ipk for our devices spark


    Thanks linuxsat25

    222338324.gif


    This version is suitable for Spark devices



    138268-6a27f64e2e9a32c7b42-png


    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1


    261538088.gif

    161388-839fd4e7b2de2cc-png



    923095066.gif


    160920-996b0a4bf5dfdb0a11a6f374-png



    ?thumbnail=1


    138268-6a27f64e2e9a32c7b42-png


    918015422.gif


    149891-c63b09ce7bfe202f5486a-png


    138295-1f60fd59d183fe25dfee73-png


    Thanks fairbird

    Update ...
    Ncam 11.7 compiled and patched READ as at 22/2/2021

    Code

    1. -Update URL for Free Servers
    2. -[powervu] Fixed emm algo
    3. -Add emu BISS2 (Best Test)
    4. -repeat to ask all gbox readers again during fallback time (Thank's chimpie232)
    5. -Fix: read the SoftCam.Key file in the url and the SoftCam.Key file in the configuration folder
    6. -Fix: cccam cfg path
    7. -Add TotalTV Serbia (0911) ATR to reader-videoguard-common
    8. -Adding CAID 0961 & CAID 09BB Sky Uk and Airtel India


    138268-6a27f64e2e9a32c7b42-png


    Note the following

    Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only


    But modern versions must Installing through ipk extension


    IPK   Valid for devices spark SH4 for enigma2

    In ncam.conf

    pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

    extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

    = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

    config_ SH4-Only for spark and neutrino

    Ncam-config_ for enigma2


    Thanks fairbird



    138268-6a27f64e2e9a32c7b42-png


    161388-839fd4e7b2de2cc-png


    Enjoy & Good luck

    ?thumbnail=1



    136115-1999e-png