Posts by ahmed gazye
-
-


Thanks fairbird
Ncam 11.3 compiled and patched READ as at 4/09/2020Code
Display MoreCode -updated cx-aio-v09.2.6 -small fix for CAK7 Cards HD03/04/05 refresh valid to date (the recommendation remains to enable shared and disable global emm) -Updated Android stapi pvu (Try to Solve Audio issues in some channels) -Updated: Multics detection (added to the detected multics, protocol = mgcamd_mcs or newcamd_mcs, removed: protocol = cccam_mcs_HB and Multics client detection (does not send unique IDs in client mode)) -Updated: Newcamd NCam (Stealth mode) -fix camd35/ext mode -webif cache-size / reader page for lg-flagged CWsNote the following
Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only
But modern versions must Installing through ipk extension
IPK for MIPS Valid for devices spark SH4 for enigma2
pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]
extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype
= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]
config_ SH4-Only for spark and neutrino

-
My brother / abdulrois
It doesn't matter that work on it or on default skin, but I do the rest of the steps above
-
My brother / abdulrois
Do not delete the main skin, but download a new skin from the server version
to change the skin
system / user interface / skin setup
-



Thanks professor /MOHAMED_OS
oscam-svn11595-emu-r798Changeset 11595
- Message:
- fix for reset readerstats @webif thnx to uf2k
- fix for client send cmd 0x50 after server restart
- fix client au + client auth
- thanks to w33dburner

my friends
Anyone who faces a problem with the work of the emu to any version
download the Same version of professor / /MOHAMED_OS topic

Download from this link
for spark receivers use - sh4.zip
sh_ 4.zip for another receiver stapi& stapi5 ( forever & similar devices)
Latest OscamEmu For STAPI & STAPI5 & SH4 And Android STAPI

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension
This has provided us with the extension ipk for our devices spark
The wonderful developer, professor /MOHAMED_OS
download the Same version of professor / /MOHAMED_OS topic in extension ipk
Thanks professor /MOHAMED_OS
Good luck


-
-
my friends
Who faces a problem with the heavy copy on the device
This is not the defect of the version, but it is a defect of Spark devices that contain a weak and old hard ware in order to
meet modern enigma, emus plugins In order to make things more clear, the biggest problem with the Spark
devices at present is the weakness of the RAM, which causes heavy and stuck to device Even with trying to remedy this problem, we only succeed in reducing its damages, but we cannot fully address it because it needs to be changed and we
do not have it The size of the RAM currently needed for copying is not less than one GB ( 1024 MB), while the Spark RAM devices devoted to copying the enigma does not exceed 138 MB. You notice the difference is very large.In order to deal with that copy of the team in an acceptable manner, you must do the following
The basic skin of the copy changed with a lighter skin, as it consumed a large amount of ram
Installing the CacheFlush or ClearMem plugin, or both, and setting it to work every 5 minutes automatically, And when you feel the heavy of the version, use the Clear now in CacheFlush or ClearMem, by pressing the blue button on the remote when you turn them on.
in addition to doing swap at least 256 MB, so the swap is better to have twice the size of the RAM.
Turn off the emus if you do not see encrypted channels and play them only when needed
And install the necessary plugins and channels file only
-
My brother / abdulrois
The copy is great
The video and audio are great
It is enough that it has a feed that enables you to install the files necessary for the work of the plugins or any Python files ... etc. It is missing in the version. Good luck to you, God willing
-
I'm waiting for another review brother, whether the image gets sharper and lighter on the remote
My brother / abdulrois
This is not the defect of the version, but it is a defect of Spark devices that contain a weak and old hard ware in order to
meet modern enigma, emus plugins In order to make things more clear, the biggest problem with the Spark
devices at present is the weakness of the RAM, which causes heavy and stuck to device Even with trying to remedy this problem, we only succeed in reducing its damages, but we cannot fully address it because it needs to be changed and we
do not have it The size of the RAM currently needed for copying is not less than one GB ( 1024 MB), while the Spark RAM devices devoted to copying the enigma does not exceed 138 MB. You notice the difference is very large.In order to deal with that copy of the team in an acceptable manner, you must do the following
The basic skin of the copy changed with a lighter skin, as it consumed a large amount of ram
Installing the CacheFlush or ClearMem plugin, or both, and setting it to work every 5 minutes automatically, And when you feel the heavy of the version, use the Clear now in CacheFlush or ClearMem, by pressing the blue button on the remote when you turn them on.
in addition to doing swap at least 256 MB, so the swap is better to have twice the size of the RAM.
Turn off the emus if you do not see encrypted channels and play them only when needed
And install the necessary plugins and channels file only
-
Hi bro i ned laste image blachkhle for sti7111
The Black Hole team does not support Spark devices. The available versions are developed by individuals. The latest upgraded version is available in the following link in the forum
BlackHole 3.0.8 edition By Machal Jan2020 for spark STI 7111 Receivers
-



Thanks professor /MOHAMED_OS
oscam-svn11594-emu-r798Changeset 11594
Code
Message:
small fix for webif

my friends
Anyone who faces a problem with the work of the emu to any version
download the Same version of professor / /MOHAMED_OS topic

Download from this link
for spark receivers use - sh4.zip
sh_ 4.zip for another receiver stapi& stapi5 ( forever & similar devices)
Latest OscamEmu For STAPI & STAPI5 & SH4 And Android STAPI

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension
This has provided us with the extension ipk for our devices spark
The wonderful developer, professor /MOHAMED_OS
download the Same version of professor / /MOHAMED_OS topic in extension ipk
Thanks professor /MOHAMED_OS
Good luck


-



My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r229-spark 7162_usb.zip
-



My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r229-spark_usb.zip
-
My friends
new Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 03/09/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
My friends
new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 03/09/2020
You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version
New PurE2 v. 6.5 to test - your feedback, please...
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
-
For those who face a problem with the remote in this version
This solution is provided by our friend / Worldcup for those who like to experience
First of delet old files from etc all lircd files and send a new files and receiver is restart then rc is 10000...% ok
http://www.mediafire.com/file/41czob35t3d6key/etc.zip/file
but this is a temporary solution must be written to the team on its site until the correction is done r the next versions -
First of delet old files from etc all lircd files and send a new files then rc is 10000...% ok
Thanks but this is a temporary solution must be written to the team on its site until the correction is done r the next versions
-
Hope to work on stb7111
Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only But modern versions must Installing through ipk extension
-
Congratulations on installing the copy And thanks should be given to the artist, ahmedmoselhi, for building the version 0pen nfr 6.5
Unfortunately, I did not understand what is really required, that you repeat the introduction of the topic again, but I am at your command in any request, brother
-
