Posts by ahmed gazye

My friend / aa7590

Use this method first and we will see if the software is accepted or not, then i create a topic on the other way

Method of passing the rescue-image for Spark devices using Cisco TFTP Server

 Good luck

e02d23.jpg

Method of passing the rescue-image for Spark devices using Cisco TFTP Server

In some cases Spark devices not accept soft rescue in by usb

Most of the problems of not accepting the rescue-image will be a defect from the usb that the device cannot read from

So we will use passing the rescue-image for Spark devices using Cisco TFTP Server

We connect the computer with the receiver with a regular Ethernet network cord

Then we enter the network settings into the computer

Control Panel \ Network Connections
Click properties

Then click properties on the option shown

Enter the IP address shown then ok

192.168.40.19

We put the rescue-image files without compression inside a spark folder in a specific path on a computer for example on a desktop If the receiver had stopped and it was working on the Soft spark

if he had stopped and it was on the enigma2, we would do the following

Instead of writing the name of the spark file, we will call it enigma2 and the file will also be directly in the Paragon as we mentioned before 

This trick can work But the basic principle is that the server is the Spark system

96c96b35.png

We run the program

We choose allow access

Click on view, then option

We delete the correct signs and choose the path of the spark file by clicking browse, then ok, and then we close the program For example, depending on the situation in which the receiver is located, as mentioned above

C: Desktop / spark

or

C: Desktop / enigma2

Then we close the program

We run the receiver in a Spark mode

And press ok until forc appears

Then we run the program again and do not press anything

Then we press the volume up v + button on the receiver, and the word fact appears

Then the program automatically sends the first repair file to the device

daf1db31ad64846ec72.jpg

Then the second

81846fc0f015a892.jpg

We wait until the download is finished and the word succ appears on the receiver and then booting

Enjoy & Good luck

My friend / aa7590

What's new?

Is the problem solved where did you arrive until now?

In some cases spark 7162 not accept soft rescue in any way by flash or by cisco tftp

And the smaller file is loaded only mImage, and when the largest file is loaded, the userfsub stops at approximately 65% . Flashing stops on the screen and nothing happens.

"Cause of the problem "

The device is downloading files into the device's RAM

It then loads it Into the ROM's internal memory

It is assumed that it starts from a certain point in Ram, which is 0x80000000

For an unknown reason, this point becomes 0x8c000000

The available memory space to download the files becomes smaller than required, so the smaller file is successfully downloaded and the larger file is not loaded,

"The solution"

Is to make the device returns load from the first point 0x80000000

"Used tools"

1- hyperterminal Loader I will provide it to you

2- Inverted RS232 cable

714c3e03b014b8b2aa822.jpg

3- Com port for desktop or USB TO RS232

If you have these tools, I can help you to carry out the required steps. If you do not have them, go to a specialist technician to implement that. He has the tools and the necessary experience.

 Good luck

My bro. / Worldcup

Please allow you to discuss the problems of any topic within the specific topic so that the brothers benefit from learning about the problems of the topic and its solutions, and until each of them makes sure that the attachments are correct and this system is best for Their device

thanks in advance for your understanding

 Good luck

My bro. / Worldcup

Thank you for trying , we made sure that 2 software are correct and there is no problem for anyone

 Good luck

My friend / aa7590

What's new?

Is the problem solved where did you arrive until now?

Go to this page may help you more

Startrack 2020 HD Plus Problem On Boot Stuck and Solution

https://www.golden-forum.com/v…b6bf8829ad32d67eb#p185102

 Good luck

My friend / Worldcup

Are you sure of what you say about the software 1.2.86?

In order to delete it from the topic so as not to cause problems to friends

Did you try the other soft 1.2.85 ?

Waiting for reply, thanks

 Good luck

My friend / BextrH

I understand you well and I know your problem with limitations. (reCaptcha)

You can get help of your friends who have experience in this field if you like, in general, we thank you for your work It is a good job as it is

Dear Friend / abdulrois

carried out his way ahmedmoselhi

Quote from ahmedmoselhi

Quote from ahmed gazye

Dear Friend / ahmedmoselhi

Did you create a new raw copy to correct the problem in the defect

build setting ftp user and password

I do not believe in the backup, I do not like to download it to my device, so how can the defect be fixed with the raw version to benefit those like me?

Good luck

Display More

in linux terminal type this command

Code

openssl passwd -6 -salt xyz  your password

the output will be sha-512 hashed password

then connect to box through telnet and type :

Code

chmod 755 /etc/shadow
vi /etc/shadow

in first line modify it to be

root:{sha-512 password}:..........

then type :wq

login again with new password

Display More

OSCam Svn Update 11.577 [ EMU ] r798

SVN + EMU Repository history

11577 felixka 13.03.2020 22:05:41

cak7

- fix HD03/05 CMD Overflow

- patch provided by @pehedima

- should fix ticket #4777

- remove some DOS CRLFs in oscam.work.c

my friends

Anyone who faces a problem with the work of the emu to any version

download the Same version of professor / /MOHAMED_OS topic

Download from this link

Latest OscamEmu For Dreambox & VU + & VU+ 4K & VPS

Thanks professor /MOHAMED_OS

Good luck

OSCam Svn Update 11.577 [ EMU ] r798

11577 felixka 13.03.2020 22:05:41

cak7

- fix HD03/05 CMD Overflow

- patch provided by @pehedima

- should fix ticket #4777

- remove some DOS CRLFs in oscam.work.c

my friends

Anyone who faces a problem with the work of the emu to any version

download the Same version of professor / /MOHAMED_OS topic

Download from this link

Latest OscamEmu For STAPI & STAPI5 And SH4

Thanks professor /MOHAMED_OS

Good luck

Dear Friend / ahmedmoselhi

Thank you, God willing, I will implement and excuse me about the backup, but I believe that it is useless to make it better for you according to what you like and according to the capabilities of your device

Good luck

My friend / BextrH

If you need a server to develop the plugin, why don't you agree with two Czech sites to use their server forum

My friend / Worldcup

I don't have the device and I don't think it is not complete but

Use the version 1.2.85 Until i search for the another one

 Good luck

Dear Friend / ahmedmoselhi

Did you create a new raw copy to correct the problem in the defect

build setting ftp user and password

I do not believe in the backup, I do not like to download it to my device, so how can the defect be fixed with the raw version to benefit those like me?

Good luck

Dear Friend / ahmedmoselhi

Thank you for your response to present your wonderful works here in the forum. We will always wait for you new ones inside the forum. Let me rest and enjoy the contributions made to our beautiful and oppressed devices.

Good luck

My friend / BextrH

I think you got it wrong that I am a developer of plugin

enigma2-plugin-extensions-freeserver

A developer called Mino6060 is an Algerian. I don't know if my guess is true or not, but I thought so from your words is it true?

 Good luck

My friend / aa7590

Try with this release with the following topic

Rescue image 1.2.58 for Spark processor 7162 all types

or

Golden Media ONE Triplex Spark sti 7162 Rescue Image 1.2.65

Most of the problems of not accepting the software will be a defect from the flash that the device cannot read from. Follow the above regarding the flash and i wait you

 Good luck

My friends

encouragement to our friend

I Invite our friends to try it and provide us with the result, stating the type of device and the name of the version on which it works, to benefit everyone and avoid problems and even help the developer to develop it

 Good luck

My friend / BextrH

Continue your progress, do not stop insisting, will push you to further progress

 Good luck