Quote from jakal012001

i've stoped folowing this release, too much problems, i feel that none any body is interested to correct and bring this Openvision versions to right path, just counting for counting numbers 345 then 346 then 347 then 348 until 10.3 r 387 without bring any news or correcting previous problems, it's time to look in other enigma2 team, listen from me this advise GO A WAY it's compleetly useless such a waste of time!

please accept my best wishes and good bay.

If not the Multiple tastes , the markets would have gone

This is your opinion personal and respects you all right
but this forum for all people and assumes provide their desires regardless if so good or not

Enjoy & Good luck

Quote from Eren21

Merhaba, benim cihaz açılmıyorsa, sana ULD söyledi şekil ekranda görünmez vermedi

:Translate:

Most of the problems of not accepting the software will be a defect from the flash that the device cannot read from

Follow the method with my topic on the following link in the forum, as it is the best

Download another copy of Softrescue until you succeed

- Rescue Soft must be installed while you are on the Spark system, not a system enigma2 Until it is accepted

- It is possible not to accept Soft Rescue from the first times, meaning that you repeat the process once, two and three until it ends and the receiver accepts the software even if it did not succeed. Download another copy of Softrescue until you succeed, God willing,

Method of passing the rescue-image for Spark devices using Cisco TFTP Server

https://www.linuxsat-support.com/thread/141959-rescue-image-for-spark-processor-7111-all-types/

Enjoy & Good luck

Quote from jomasu

not download

try it Works

https://download1651.mediafire…2-10.3-r386-vuuno_usb.zip

Quote from qaziabid82

I update successfully but when i want to scan channel it showing signal but not scanning any channel. How i can solve this problem

Send a ready-made channels file. If you do not know the method, return to my topic in the forum at the following link

Explained how to take a copy of channel list or Transported it to receiver across usb in Spark system

Quote from Abdi24

How to install new plugins in startrak 2020 hd plus..?:derpthink:

Go to my topic in the forum at the following link

Spark Full Plugin with PowerVU and Tandberg auto-roll - 6-1-2017

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuzero usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…-10.3-r387-vuzero_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuultimo usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…0.3-r387-vuultimo_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vusolose usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…0.3-r387-vusolose_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vusolo2 usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…10.3-r387-vusolo2_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuduo usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…2-10.3-r387-vuduo_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuduo2 usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…-10.3-r387-vuduo2_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuzero4k usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…0.3-r387-vuzero4k_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuultimo4k usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im…3-r387-vuultimo4k_usb.zip

Enjoy & Good luck

Another Openversion to yacp.net

The Openversion compiling by yacp.net
Thanks yacp.net

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image vuduo4kse usb.zip 23/04/2021

I do not own the device, and I brought the version for those who like to experience

https://openvision.yacp.net/im….3-r387-vuduo4kse_usb.zip

Enjoy & Good luck

My friends

new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 22/04/2021

You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version

New PurE2 v. 6.5 to test - your feedback, please...

Download from official website ...

http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/

Enjoy & Good luck

My friends

new Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 23/04/2021

You can write to the version team on the next page of the forum if you want it, it is dedicated to member comments on the new version

New PurE2 v. 6.5 to test - your feedback, please...

Download from official website ...

http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/

Enjoy & Good luck

Update

This is the best solution for

who face a problem in loading or working the Plugin freeserver  in some images

where it became clear to me that the additions in Plugin need some updates that may not be available in all versions of all images Special versions old,

which leads to the failure of the Plugin Those who need to work on the Plugin to bring the servers and re-written files only can work on the modified version by me it work for me in most images

freeserver 1.1 modify by scripts freeserver7.2.1 Without other additions

To benefit From Update the servers in the main script

freeserver 1.1 modify FreeServer 7.2.1 Script Gives you the following outputs

files Ncam server, OScam server, Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / usr/ keys & etc by all the servers

With the attached the Plugin freeserver 1.1 modify by me from scripts freeserver 7.2.1 extension file ,unzip it & add freeserver file with program DCC to the following

usr /lib/ engima2 / python / Plugin / extensions

Then restart your Reciver

Enjoy & Good luck

Quote from dekisan71

In Times.txt there is something like:

(0, 0):(0, 0)

I thing that something happening here that not work for me.

Obviously, you have a problem with time with the version, not the plugin

My friends

in image some defects but works in an acceptable way you can see that with the following pictures I have written to the team on his website, follow the following message to installation

Last openvision 10.3-r387 usb.zip spark 7162 22/4/2021

for gurasik431 Thanks gurasik431

Installation on the external flash by imagemanager

I think since you has added plugin NFR4XBoot to image became plugin NFR4XBoot for open nfr it install the version on the external flash but channels do not work

installation ......across wizard At the end...... crash happens

exit wizard And complete the settings from image

The total Ram said to become 118 mb instead of 138 mb Previously This leads to the ponderosity of the copy

There is no feed and there are some important files missing for making some emus and plugins such as curl/ libcurl4/ libssh2......etc

It is completed from any feed that you can get if you managed

Unlike the above Quick test The version works well

open webif work good

Enjoy & Good luck

Quote from isah2

Another release another problems...….

Green screen after start up wizard.

Quote from belinea

Hello! For me, iptv programs don't start after installing freearhey.

(Octagon SF8008)

Quote from Marwan2015

Quote from ahmed gazye

Another version to gurasik431

The version compiling by gurasik431

Thanks gurasik431

new Open Vision 10.3

Open Vision 10.3 r387 enigma2 image spark usb.zip multiboot.tar.gz 22/04/2021

My friends

openvision-e2-extralanguage-py2-10.3-r387-spark

https://runigma.com.ua/feeds/O…87-spark_multiboot.tar.gz

https://runigma.com.ua/feeds/O…2-10.3-r387-spark_usb.zip

Enjoy & Good luck

Display More

Bad version crashes from the start installation .

Display More

My friends

in image some defects but works in an acceptable way you can see that with the following pictures I have written to the team on his website, follow the following message to installation

Last openvision 10.3-r387 usb.zip spark 7162 22/4/2021

for gurasik431 Thanks gurasik431

Installation on the external flash by imagemanager

I think since you has added plugin NFR4XBoot to image became plugin NFR4XBoot for open nfr it install the version on the external flash but channels do not work

installation ......across wizard At the end...... crash happens

exit wizard And complete the settings from image

The total Ram said to become 118 mb instead of 138 mb Previously This leads to the ponderosity of the copy

There is no feed and there are some important files missing for making some emus and plugins such as curl/ libcurl4/ libssh2......etc

It is completed from any feed that you can get if you managed

Unlike the above Quick test The version works well

open webif work good

Enjoy & Good luck