Posts by raindancerob

Dear speedy005

Greetings – many thanks and appreciation to everyone who has made an effort to contribute to the development of this plugin. I hope you accept my simple contribution and simple assistance in this plugin. I made some simple modifications to most of the files, and now the plugin works well with with PY2 & PY3 , Dreambox images and also the Openpli image. I tested it and the results were successful. However, with the Openatv 7.6 image, the tests took a long time, but the service scan update folder was always empty and did not contain any of the new channels, unlike the other images tested. Is it possible to test and accept my attached files? They work with most images except the Openatv 7.6 image ,The plugin works well, but new channels do not appear in the folder.

Br

hi version 1.7 works well for me on Open ATV 7.6

Quote from raindancerob

Quote from pepsik

biko,

Quote from biko

the files named IPTVarchive not HistoryZapSelector

any update to support image python as massage say Unsupported version of Python - 313

Download the installation package from the post again and check it. I fixed it and replaced the package without changing the version number. Most likely, you have an old version of the installation package.

And today, by evening, I will update the version. I found some inaccuracies in the code that could lead to crashes when using “colored” buttons when switching the EPG view.

thanks for the info. it works well bar when you press info (event view) it causes a crash

Display More

doesnt work, version 1.0.43 works perfecly mind

Quote from pepsik

biko,

Quote from biko

the files named IPTVarchive not HistoryZapSelector

any update to support image python as massage say Unsupported version of Python - 313

Download the installation package from the post again and check it. I fixed it and replaced the package without changing the version number. Most likely, you have an old version of the installation package.

And today, by evening, I will update the version. I found some inaccuracies in the code that could lead to crashes when using “colored” buttons when switching the EPG view.

thanks for the info. it works well bar when you press info (event view) it causes a crash

Quote from supwiddiss

Nobody seems to get it. Osmio4k, sure. SF8008 absolutely.

VU+....."Here's a tuner and you get your choice". A choice of what?

How about the "VU+ challenge"?
Webif, Main Menu>Devices. And Bob's your uncle (but mom knows better).

"Vu+ sucks at blindscan". "VU+ won't blindscan". "What??? You expect the vendor to open a box and check them out?".
Hellyeah I do.

Linux allows for listing every device connected to the system. 1_0_1_70_1_0_A1D1055_0_0_0_20250321182059.jpg

Display More

blindscan does work on Vu+ but only on VTI image which is massively out of date. what i dont get is why is the blindscan plugin present on other images as it gets updates often but cant be used ?

tbh tho blindscan on VTI is crap at best. i use my Octagon SF8008 to blindscan, then scan the found frequencies in on Vu+ Duo 4K SE which isint ideal as the Octagon is in another room. is there a way to use the tuners from my Octagon on VU+ for scanning ? iv tried using Sat IP client but it finds the IP address for itself not the other box on the network ? same the other way round, is only finding itself not the other box. i can access Sat PI web interface on both receivers mind

Quote from speedy005

Plugin version 1.7

bug corrected

thanks will try & report back

Quote from speedy005

@ raindancerob

Have you tested plugin version 1.6?

cu

speedy005

hi just tested. still crashes

Quote from speedy005

@ raindancerob

Have you tested plugin version 1.6?

cu

speedy005

not yet no will try & report back. on Open ATV 7.6 Beta do i need to uninstall version 1.5 first i take it ?

hi i now get this error how do i fix please ?

Quote from Pabloisred

Do is there anyway of getting a sly card from a sly hd amstrad reciever to work inside a sf8008 reciever?

Thread

Oscam Configs For SKY UK CAID 0960 Red Card

[align='center']Here are working configs for Oscam or Oscam & CCcam For SKY UK CAID 0960 Red card

## The attached configuration will update uk card entitlements ##

In order to get movies & sports working you must convert the serial number of the official decoder to hex then add it to boxid in oscam.server.
Use these tools to convert the boxkey => Dreambox Config Creator v0.9.5 by B16MCC or CCcam BoxKey Generator..
(Code, 43 lines)


(Code, 15 lines)

(Code, 8 lines)

master G

Jun 6th 2015

thanks for confirming. all the best

Quote from abu baniaz

Your share is just another reader. Add your share to the above configs or add the reader from the above configs to your existing config files.

got it working. nice1 🙂

hi crashes on TNAP 6 on Octagon SF8008

hi im wondering am i ok to add the config files along side my euro line ie its ok to run both at same time ? thanks

Quote from Youchie

Quote from raindancerob

thanks

Quote from Youchie

Quote from raindancerob

hi i get the following error on Vu+ Duo 4K SE Open ATV 7.6 Alpha. how do i fix please ? thanks

hi this is what i get but still no pictures or sound

it’s working well now.

please check the sofcam.key file and see if the key you added is registered inside it.

maybe the BISS key is not correct or it has expired.

Display More

hi yes your correct my bad, thanks again for your help is much appreciated

hi is now working on Open ATV 7.6 Alpha

many thanks

thanks

Quote from Youchie

Quote from raindancerob

hi i get the following error on Vu+ Duo 4K SE Open ATV 7.6 Alpha. how do i fix please ? thanks

hi this is what i get but still no pictures or sound

hi i get the following error on Vu+ Duo 4K SE Open ATV 7.6 Alpha. how do i fix please ? thanks

thanks mate

many thanks

ok, how do i set that up please, is there a guide ?

thanks

hi i get the following error on Vu+ Duo 4K SE Open ATV 7.6 Alpha

root@vuduo4kse:~# python3 key_patcher.py --ip 192.168.4.44

/home/root/key_patcher.py:176: SyntaxWarning: invalid escape sequence '\s'

if not match(f'P\s0*{group:X}[a-fA-F0-9]{{4}}.+added\sby', line.decode('utf-8', errors='ignore')):

/home/root/key_patcher.py:176: SyntaxWarning: invalid escape sequence '\s'

if not match(f'P\s0*{group:X}[a-fA-F0-9]{{4}}.+added\sby', line.decode('utf-8', errors='ignore')):

/home/root/key_patcher.py:190: SyntaxWarning: invalid escape sequence '\s'

res = match(b'Version:\s+(\S+)', line)

/home/root/key_patcher.py:193: SyntaxWarning: invalid escape sequence '\s'

res = match(b'ConfigDir:\s+(\S+)', line)

2025-08-01 16:22:50,534 INFO PowerVU KeyPatcher by taras-ua, ver 0.92

2025-08-01 16:22:50,545 INFO Connecting ONLY AFN POWERVU KEYS - NO CHAT - KEYS ONLY !!

2025-08-01 16:22:51,058 INFO Found last page: 716.

2025-08-01 16:22:51,059 INFO Connecting ONLY AFN POWERVU KEYS - NO CHAT - KEYS ONLY !!

2025-08-01 16:22:51,638 INFO Got key pair ('003C79CEFD8AF4C7', '0156DD79B724C5C3').

2025-08-01 16:22:51,706 INFO Found OsCam version: 2.25.05-11884-802@76c92a2c

2025-08-01 16:22:51,801 INFO /etc/tuxbox/config/oscam-emu/SoftCam.Key has been patched with ('003C79CEFD8AF4C7', '0156DD79B724C5C3').

2025-08-01 16:22:51,863 INFO Done! Please restart OSCAM on your receiver.

root@vuduo4kse:~#