Oscam Configs For SKY UK CAID 0960 Red Card

I am using the config given by master G, i got a question on the EMM.

I see some received EMMs, using this config, but does i need to do something more ?

These received EMMs are automatically written to the card or does i need to do myself ?

Sorry for the numb question ( and my awful english)

Regards.

Hello, i have the white card as bellow. I cannot configure OSCAM. The above tips don't work. Please help.

Quote from master G

Quote from Kami3n147

Hello, i have the white card as bellow. I cannot configure OSCAM. The above tips don't work. Please help.

The white sky cards need to be paired with an old official SD Sky box.

The oscam CAID (0963) is different from the red card (0960).

hi - is it still not possible to get HD channels anymore after the switch to white cards, orhave things changed now?

hi im wondering am i ok to add the config files along side my euro line ie its ok to run both at same time ? thanks

thanks for confirming. all the best

Quote from abu baniaz

Your share is just another reader. Add your share to the above configs or add the reader from the above configs to your existing config files.

got it working. nice1 🙂

hi i now get this error how do i fix please ?

Hi, iv just been given this UK card from a Pal who`s mother sadly recently passed away

she had a paid sub, isit wort a try... or am i wasting my time??

ive searched around loads but cannot find a thread with the latest Emm`s i need to send across with Oscam,

Screenshot-2025-09-01-160114.png

Also is this reader correct ?

cheers

[reader]

label = SKYUK_Entertain

protocol = pcsc

device = 2

caid = 0960

readtiers = 2

detect = cd

mhz = 450

cardmhz = 450

ident = 0960:000000

group = 1

emmcache = 1,1,31,0

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

dropbadcws = 1

Are you sure its a 0960 card as i have a sky uk card and i thought it was 0963 but i worked out that is was a 0961 card. try using the wildcard caid

caid = 09*

in your configs then disable your reader insert the card and enable and watch the oscam log to see whats detected. it should initialise then when you switch to a channel it will select one of the three sky caids 0960 or 0961 or 0963 once you have that you can change the config to match.

Could you post your reader config and also your dvbapi config. Which box are you using ? . And is it a SoftCSA channel or a channel that dosnt require soft CSA as with my card the SoftCSA channels require a different config to non softCSA channels.

0960 open TNT sport2,3,4,5.6, and premier 1HD,2HD, but i see sometime from oscam open sky it full , from mcs

Blink44 Is it working with oscam ? of course Sky It !

;

yes, Samur , i got test sky it oscam and i see is open full but he is payserver , from me open supertenis hd, deejay only from sky it

Which binary are you using for Sky IT ?

Thanks,

Quote from abu baniaz

They are the official ones from the ATV secret feeds. Anyway, it doesn't matter too much, the channel is closing down next week.

How would you configure softcsa/icam chanenls differently to non-softcsa/icam?

i have set the reader up and then two users that are in the reader group 1 and then set the dvbapi to use group 2 with two loopback readers also group 2 one with disablecrccws = 1 and one with disablecrccws = 0 the main reader has disablecrccws = 1. The two loopback readers have the services that are effected by softcsa listed in the ncam service file under CSA-channels and these are enabled on the loopback reader with disablecrccws = 1 and then the everything else is enabled on the second loopback reader with !Csa-Channels flag this seems to acheive what i wanted where the majority of channels do not need the disablecrccws flag and i am able to add effected services to the services file as needed which instantly starts clearing them if the flag is needed.